Re: Problem mounting Windows 7 64 bit share: Negative RFC1002 Session Response Error 0x83000001)

On Wed, May 5, 2010 at 11:19 AM, Yanko Sheiretov <[email protected]> wrote:
> Still unable to mount a share from a Windows 7 64 bit server on a linux
> client.
> The share is accessible via smbclient on Linux and from Win XP systems on
> the
> network. I also added the AllowLegacySrvCall key in the registry accoring to
> KB957441 but that had no effect.
>
> The mount command is:
> mount -t cifs //PIRIN/C /mnt -v -o user=yanko,ip=192.168.1.12
>
> The error is:
> mount error(112): Host is down
> Refer to the mount.cifs(8) manual page (e.g. man mount.cifs)
>
> I turned on debugging in /proc/fs/cifs and got the following in the log:
>
>  fs/cifs/cifsfs.c: Devname: //PIRIN/C flags: 64
>  fs/cifs/connect.c: CIFS VFS: in cifs_mount as Xid: 3 with uid: 0
>  fs/cifs/connect.c: Username: yanko
>  fs/cifs/connect.c: UNC: \\PIRIN\C ip: 192.168.1.12
>  fs/cifs/netmisc.c: address conversion returned 1 for 192.168.1.12
>  fs/cifs/connect.c: Socket created
>  fs/cifs/connect.c: sndbuf 16384 rcvbuf 87380 rcvtimeo 0x1b58
>  fs/cifs/transport.c: Sending smb:  total_len 72
> | 0x81 0x00 0x00 0x44 0x20 0x43 0x4b 0x46  |  _ _ _ D   C K F
> | 0x44 0x45 0x4e 0x45 0x43 0x46 0x44 0x45  |  D E N E C F D E
> | 0x46 0x46 0x43 0x46 0x47 0x45 0x46 0x46  |  F F C F G E F F
> | 0x43 0x43 0x41 0x43 0x41 0x43 0x41 0x43  |  C C A C A C A C
> | 0x41 0x43 0x41 0x43 0x41 0x00 0x20 0x46  |  A C A C A _   F
> | 0x43 0x45 0x50 0x46 0x41 0x45 0x50 0x46  |  C E P F A E P F
> | 0x45 0x45 0x42 0x45 0x4e 0x45 0x50 0x43  |  E E B E N E P C
> | 0x4f 0x45 0x49 0x45 0x50 0x46 0x41 0x46  |  O E I E P F A F
> | 0x45 0x45 0x50 0x43 0x4f 0x41 0x41 0x00  |  E E P C O A A _
>  |  E E P C O A A _
>  fs/cifs/connect.c: Existing smb sess not found
>  fs/cifs/cifssmb.c: secFlags 0x37
>  fs/cifs/transport.c: For smb_command 114
>  fs/cifs/transport.c: Sending smb:  total_len 82
> | 0x00 0x00 0x00 0x4e 0xff 0x53 0x4d 0x42  |  _ _ _ N ÿ S M B
> | 0x72 0x00 0x00 0x00 0x00 0x00 0x01 0xc0  |  r _ _ _ _ _ _ À
> | 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00  |  _ _ _ _ _ _ _ _
> | 0x00 0x00 0x00 0x00 0x00 0x00 0x3b 0x14  |  _ _ _ _ _ _ ; _
> | 0x00 0x00 0x01 0x00 0x00 0x2b 0x00 0x02  |  _ _ _ _ _ + _ _
> | 0x4c 0x4d 0x31 0x2e 0x32 0x58 0x30 0x30  |  L M 1 . 2 X 0 0
> | 0x32 0x00 0x02 0x4c 0x41 0x4e 0x4d 0x41  |  2 _ _ L A N M A
> | 0x4e 0x32 0x2e 0x31 0x00 0x02 0x4e 0x54  |  N 2 . 1 _ _ N T
> | 0x20 0x4c 0x4d 0x20 0x30 0x2e 0x31 0x32  |    L M   0 . 1 2
> | 0x00 0x02 0x50 0x4f 0x53 0x49 0x58 0x20  |  _ _ P O S I X
> | 0x32 0x00                                |  2 _
>  fs/cifs/connect.c: Demultiplex PID: 5192
>  fs/cifs/connect.c: rfc1002 length 0x83000005
>  fs/cifs/connect.c: Negative RFC1002 Session Response Error 0x83000001)
>  fs/cifs/connect.c: Clearing Mid 0x1 - waking up
>  fs/cifs/connect.c: Wait for exit from demultiplex thread
>  CIFS VFS: No response for cmd 114 mid 1
>  fs/cifs/misc.c: Null buffer passed to cifs_small_buf_release
>  CIFS slow rsp: cmd 114 mid 1 A: 0x3a98 S: 0x3a98 R: 0xb7bc51
>  fs/cifs/cifssmb.c: negprot rc -112
>  fs/cifs/connect.c: CIFS VFS: leaving cifs_mount (xid = 3) rc = -112
>  CIFS VFS: cifs_mount failed w/return code = -112
>
> Is this a kernel bug?
> Using latest kernel 2.6.33.3 (latest)
> CIFS_VERSION   "1.62"
>
>
>
> _______________________________________________
> linux-cifs-client mailing list
> [email protected]
> https://lists.samba.org/mailman/listinfo/linux-cifs-client
>

Do you see anything on the wire (e.g. using wireshark trace) on either
client or on the Windows7 server?
Can you ping the Windows7 server from the client?
I have mounted Windows7 shares on ciffs cleint, so I know it works.

Regards,

Shirish