RE: JFFS2 for multi-partition Flash

"Fadi Nasser" <[email protected]> Tue, 21 Dec 2004 10:38:55 -0800

Newsgroups	gmane.linux.file-systems.jffs,gmane.linux.drivers.mtd
Message-ID	<[email protected]>

FYI,
I just found out the problem with the padding. If I use the mkfs.jffs2
Tools I downloaded from some site with the -p 0x1ee0000 option, I still
Get the 0x100000 total size. Using explicitly --pad=0x1ee0000, I get
The desired size. Something to do with (argv[i] == 'p') not being 
Interpreted properly I guess. 

-----Original Message-----
From: David Woodhouse [mailto:[email protected]] 
Sent: Tuesday, December 21, 2004 10:19 AM
To: Fadi Nasser
Cc: Pedro Aguilar; [email protected]; [email protected]
Subject: Re: JFFS2 for multi-partition Flash

On Tue, 2004-12-21 at 09:51 -0800, Fadi Nasser wrote:
> "mknod /dev/mtdblock1 b 31 0"

Don't. /dev/mtdblock1 should have minor number 1. The offset which JFFS2
sees is the offset within the _partition_ not on the raw device.
-- 
dwmw2



To unsubscribe from this list: send the line "unsubscribe jffs-dev" in
the body of a message to [email protected]