Re: RE: why jffs2 complain no space left on device while there is some space left ?

Dear Spencer Shanson:
	thank u very much, but perhaps your  solution have no effects to me, the=
 number of sectors for each partion is more than 8 now, and sectors are c=
ontiguous, following  are the partions info, and each sector size is 64k,=
 so the sector number of partion '/dev/mtdblock2' is 63 sectors, do you h=
ave any suggestion?   thanks a lot.

Filesystem           1k-blocks      Used Available Use% Mounted on
/dev/mtdblock2            4032      3972        60  99% /
/dev/mtdblock3            2880      2860        20  99% /mnt/mtd3

=09

------- 2006-10-11 01:58:05 wrote=A3=BA----------

>I had a similar problem. All the on-line docs I can find say you need to
>have 6 contiguous sectors assigned to the JFFS2 partition. That worked
>for a while, but eventually I ran into out-of-space problems. I wrote
>this simple script to verify it:
>
>#!/bin/sh
>
>I=3D1
>while [ 1 ]; do
>    echo "----> $I"
>    echo "Run $I " >>/nvram/foo
>    I=3D`expr $I + 1`
>done
>
>Someone else told me that the solution is to give the JFFS2 partition 8
>sectors. I tried that and it works great. Well, great if you don't mind
>giving up the other sectors, but I've not had any problems since.
>
>--Spence
>
>
>-----Original Message-----
>From: [email protected] [mailto:[email protected]] On Behalf
>Of huzhibin
>Sent: Tuesday, October 10, 2006 2:00 AM
>To: jffs-dev
>Subject: why jffs2 complain no space left on device while there is some
>space left ?
>
>Hi:
>  all
>  i have a strange problem with the jffs2 system:=20
>when i use df to check the space:
> # df
>Filesystem           1k-blocks      Used Available Use% Mounted on
>/dev/mtdblock2            4032      3972        60  99% /
>
>but it complain that no space left on device when i try to write on it:
># echo "hi" >hi.txt
>cannot create hi.txt: No space left on device
>
>there is more strange that the available space is not certain when it
>start complaining, sometime is 98, or values less than 98.  =20
>
>my system kernel is linux 2.4.17, filesystem is jffs2, run with 8M
>Flash.
>following is some system infomation:
># cat /proc/mtd=20
>dev:    size   erasesize  name
>mtd0: 00020000 00010000 "Boot loader"
>mtd1: 00100000 00010000 "Kernel"
>mtd2: 003f0000 00010000 "Root File System"
>mtd3: 002d0000 00010000 "Application File System"
>mtd4: 00002000 00002000 "Partition Table"
>mtd5: 00002000 00002000 "Factory default"
>mtd6: 00008000 00002000 "Runtime NVRAM-T"
>mtd7: 00008000
>
># mount
>/dev/mtdblock2 on / type jffs2 (rw)
>/dev/mtdblock3 on /mnt/mtd3 type jffs2 (rw)
>proc on /proc type proc (rw)
>null on /var type ramfs (rw)
>
>
># cat /etc/fstab=20
># /etc/fstab: static file system information.
>#
># <file system> <mount point>   <type>      <options>   <dump>  <pass>
>/dev/mtdblock2  /               jffs2       defaults    0       0
>/dev/mtdblock3  /mnt/mtd3       jffs2       defaults    0       0
>proc            /proc           proc        defaults    0       0
>null            /var            ramfs       defaults    0       0
>
>the parameters creating jffs2:
>mkfs.jffs2 \
>--eraseblock=3D0x00010000 \
>--cleanmarker=3D12 \
>--big-endian \
>-r mtd3 -o mtd3.img
>
>anyone have any ideas?
>thanks a lot.
>
>=09
>
>
>	Best Regards
>	[email protected]
>	2006-10-10
>
>
>To unsubscribe from this list: send the line "unsubscribe jffs-dev" in
>the body of a message to [email protected]

--------------------------------------
	Best Regards
	Shenzhen RouterD Networks Ltd.
	huzhibin
	[email protected]
	2006-10-11







To unsubscribe from this list: send the line "unsubscribe jffs-dev" in
the body of a message to [email protected]