jffs-help
John Praveen <[email protected]>
| Newsgroups | gmane.linux.file-systems.jffs |
|---|---|
| Message-ID | <[email protected]> |
Hi,
I have an embedded device based on ARM
processor.
My device has 32 Flash memory, 64MB SDRAM. The
OS is linux OS. My linux OS will be in Flash memory. I
need to have a file system or Flash memory.
I shall use jffs2 filesystem.
I dont have the target system right now. So i
have to create the filesystem in my host system now
and use that filesystem in my target device later.
mkfs.jffs -d /home/jffsstuff -o /tmp/jffs.image
/home/jffsstuff - stuff to put in flash
Is this jffs.image to be put in the Flash memory in
the target?
What confuses me is, is the command mkfs.jffs
is to be executed with the target flash in the host
system? or is this to be executed without the
target solely on the host system and later the image
file can be put in the target when the target is
ready?
Regards,
John.
__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com
To unsubscribe from this list: send the line "unsubscribe jffs-dev" in
the body of a message to [email protected]