Re: Fedora Core development freshrpms packages

On 1/25/06, Justin Conover <[email protected]> wrote:
>
>
>
> On 1/24/06, Matthias Saou <thias@spam.spam.spam.spam.spam.spam.spam.egg.and.spam.freshrpms.net
> > wrote:
> >
> > Matthias Saou wrote :
> >
> > > I've rebuilt all freshrpms.net packages against Fedora Core
> > development
> > > (soon to become Fedora Core 5), which you are more than welcome to
> > test
> > > extensively and report here any bugs you might find.
> > [...]
> >
> > Zero feedback! Things _are_ working that smoothly? :-)
> >
> > Since we are approaching the last FC5 test release, I really encourage
> > everyone to try out Rawhide and file bug reports ASAP to increase FC5's
> > overall quality as much as possible! ;-)
> >
> > Matthias
> >
> > --
> > Clean custom Red Hat Linux rpm packages : http://freshrpms.net/
> > Fedora Core release 4 (Stentz) - Linux kernel 2.6.14-1.1656_FC4
> > Load : 0.45 0.49 0.43
> >
>
> Sorry, been busy but I'm using many things on two rawhide box's x86/amd64
> and haven't had any troubles yet, I'll do some more testing over the next
> week or so and let you know what I use and if there are any problems.
>

x86_64 rawhide box
mp3's play in xmms/rhythmbox
cd's rip with mp3's through sound-juicer
videolan-client/mplayer plays dvds

[justin@echelon ~]$ /usr/bin/xine-check
Please be patient, this script may take a while to run...
[ good ] you're using Linux, doing specific tests
[ good ] looks like you have a /proc filesystem mounted.
[ good ] You seem to have a reasonable kernel version (2.6.15-1.1871_FC5)
[ hint ] Architecture is x86_64 (not intel), assuming there is no MTRR.
         MTRR (Memory Type Range Registers) are used on intel CPUs to
         control caching mechanisms for special memory ranges. There is
         probably nothing like this on x86_64 CPUs...
         press <enter> to continue...

[ good ] unable to find 'xine' binary in usual places
[OUCH!!] There is no 'xine' executable in your PATH
         Maybe you don't have xine-ui installed?
         If xine-ui is installed, it would probably be a good idea to add
         it's binary directory to your PATH...
         press <enter> to continue...

[OUCH!!] no xine-config on this machine.
         This means that xine-lib is either not installed
         or it is installed in a very unusual place.
         So you should probably install xine-lib before running
xine-check...
         press <enter> to continue...

[ hint ] unable to determine plugin directory
         I could not determine your plugin directory. That would be much
easier
         if you had xine-config installed (see message above)...
         Note that I could not check your xine plugins.
         press <enter> to continue...

[ good ] /dev/cdrom points to /dev/hdc
[ good ] /dev/dvd points to /dev/hdc
[ good ] DMA is enabled for your DVD drive
[ good ] found xvinfo: X-Video Extension version 2.2
[ good ] your Xv extension supports YV12 overlays (improves MPEG
performance)
[ good ] your Xv extension supports YUY2 overlays
[ good ] Xv ports:  YUY2 YV12 UYVY I420 YUY2 YV12 UYVY I420


[root@echelon ~]# rpm -qa xine\*
xine-skins-1.10-1.fc
xine-lib-1.1.1-1.2.fc4.1
xine-0.99.4-2.2.fc4.1