Re: hardware raid

I wouldn't say  it's useless  -  you can boot to the RAID array but only as 
individual drives. Then you can LVM the rest of the drives together into a 
semi-software RAID configuration if you like. I have heard rumors of people 
getting it to boot from a real array but all I have read says it won't work. 
the SRM console sees a bunch of drives and tries to boot from one of them. 

This is my solution which may or may not work in your situation. I bought a 
stand-alone 9GB SCSI drive brand new for $19 online - that is my boot drive. 
Then I put my Mylex card in a windows box and created the array witth the Dos 
tools. Moved card back to Alpha and set up under linux. Everything is good.

Scott

On Sunday 05 October 2003 10:12 am, [email protected] wrote:
> Supposing the 230/plus is useless to me, what RAID controllers are
> supported in linux or booting on alpha platforms?
>
> -----Original Message-----
> From: Scott Seekamp [mailto:[email protected]]
> Sent: Sunday, October 05, 2003 12:37 AM
> To: [email protected]
> Subject: Re: [gentoo-alpha] new difficulties
>
> On Saturday 04 October 2003 10:33 pm, Scott Seekamp wrote:
> > I can vouch for that - I have a Mylex 960 which linux supports but there
>
> is
>
> > no way to get the RAID working properly or boot to it. If you can set up
> > the array on another machine and then move it over you should be able to
> > use it as secondary storage.
> >
> > Scott
> >
> > On Saturday 04 October 2003 10:08 pm, [email protected] wrote:
> > > Ok, progress is being made on my install. I now have to cope with the
> > > 230/plus raid controller  that is the primary boot device. My
> > > understanding is that it is a digital-rebranded mylex controller that
> > > is not supported under linux. Apparently it can't be flashed up to a
> > > recent firmware either. Is this still the case as far as anyone knows?
> > >
> > > Does anyone have one of these?
> > >
> > > --
> > > [email protected] mailing list
>
> --
> [email protected] mailing list
>
> --
> [email protected] mailing list


--
[email protected] mailing list