RE: boot issues

[email protected]
Newsgroups gmane.linux.gentoo.alpha
Message-ID <71650A6F73F1D411BE8000805F65E3CB3B36F4@SRV-03>
>> I have a linux md raid-5 root partition. 
>
>Why oh why?

Was actually much nicer than when I last looked at Linux sw-raid, back in
the .50 days.
Why the trepidation?

>> I'm guessing the kernel will be too large to get onto a floppy. Perhaps
the
>> most direct solution would be to modify the livecd image to be my boot
>> media.
>
>Did you get this figured out?  I'm curious what you did.

I'm dumb. I was thinking the system.map needed to be on the floppy for aboot
to work. I just made an ext2 boot floppy with aboot on it, built most
everything as modules, and configured aboot to pass root=/dev/md0 as a
kernel parameters and it took right off. All that needs to be on the floppy
is the aboot boot block, loader, aboot.conf and kernel. No ramdisk needed.




--
[email protected] mailing list
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.