repo/gentoo:master commit in: dev-lang/python/
MichaŠGórny <[email protected]> Wed, 05 Aug 2026 17:06:43 +0000 (UTC)
| Newsgroups | gmane.linux.gentoo.cvs |
|---|---|
| Message-ID | <1785949598.b473e96b4031963205265d8d8a363c0776941019.mgorny@gentoo> |
commit: b473e96b4031963205265d8d8a363c0776941019
Author: Michał Górny <mgorny <AT> gentoo <DOT> org>
AuthorDate: Wed Aug 5 16:52:39 2026 +0000
Commit: Michał Górny <mgorny <AT> gentoo <DOT> org>
CommitDate: Wed Aug 5 17:06:38 2026 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=b473e96b
dev-lang/python: Bump to 3.14.7
Signed-off-by: Michał Górny <mgorny <AT> gentoo.org>
dev-lang/python/Manifest | 3 +
dev-lang/python/python-3.14.7.ebuild | 636 +++++++++++++++++++++++++++++++++++
2 files changed, 639 insertions(+)
diff --git a/dev-lang/python/Manifest b/dev-lang/python/Manifest
index ab33d4316780..76e3bf6b4a8b 100644
--- a/dev-lang/python/Manifest
+++ b/dev-lang/python/Manifest
@@ -10,6 +10,8 @@ DIST Python-3.13.14.tar.xz 23021880 BLAKE2B 8f60f704c06fbfc2ee8ae3b2aa5c74cb5941
DIST Python-3.13.14.tar.xz.asc 963 BLAKE2B d500bc16d5a1a1fb999b6c98ed076077a7fa8ab55b437a676c5f20f4665d27ee4644653e55a82ab78f2be18bb38b2cfa95efe5f39d7d39db3fe6c4b227c5d6ad SHA512 a5cfab862ac03447838d13c4d1a9b085a8c8a947c958fd42cecb42929817b1448c1b23a124c87456abd43a1cadfcfb427f394eead9eaf0b84f3296fa263dba6c
DIST Python-3.14.6.tar.xz 23921184 BLAKE2B d3038309c02fb260ee54a4151c67999930099455a993e8b712ec5d7cac97fcd8fc847288b0c93ca8c30d5acbf79325e6d54d16019b7daf51ade982208548386e SHA512 90a82f46c28f0fca613b67358fdc57c145ab05d20fb56bf3bc0c9e4e54947c7d30fbaa6856c41a41909237a9e601d1a7d19579d4b25c7a784ebcfe9012defc41
DIST Python-3.14.6.tar.xz.sigstore 5539 BLAKE2B f48bd02fb1588306063d2a05b905bb640b23d73a404f39c6b1100b457d71bac296aaf753f24eb25c7bf060cf73972179d6e8b123f6931e69067480ded50e5d01 SHA512 461b8b4b8af0af507681fd1dd684c3559edfcc6cd79454ee0635f8e2d1606e87528ad24c9142bca2eb1ba4a70aeb123750cb9e6c181de6675205849d8cb58a48
+DIST Python-3.14.7.tar.xz 24053924 BLAKE2B 7d6988f906a402dbfc87b690f228b5fc53de024602bb459360e0482c1e323e212c71ff389b2c37bcc35248df9d9aa3bf710d3745484048cce7d4a41e5b3ea937 SHA512 3d4e2e2f983b320dec47005c408d7178d3656a6de0c4430ce21514797174b972f461200898b25d3dfac2a455019ef87e45d0fb2bb6ec2ca887124d10037a2a07
+DIST Python-3.14.7.tar.xz.sigstore 7101 BLAKE2B 9c016780aad594596b5f4782e755f211bf6c635026c2c854d6594aba2254c84eeb78f0e90eae4b0ba218168c2162999b2e9327184031c43d8b111fb72e95f888 SHA512 6e56084d4c45712d2ce21c4f16008513e4daa22f2a6174b4d715c2bcf80a2fa9a1356ea6c4ecb8470ab2f08117ef79301da666b53b264bac53ae0801e410d189
DIST Python-3.15.0b2.tar.xz 35381676 BLAKE2B 59834dc8301dcc9d7e25fd3faf6060a6755443f3782fd3f035d82896468013d01be1b558f7d5c7099b32d49256b09055fde324660d66a52900f519f75acb5556 SHA512 fae17efc3bd2604fdff2d63e0afeac47562165a5da2e1e027f4126b4f8bbb4957f3a2f406d6db23a20c8881fad108385b4b2afb53482075dbe16a690778ccd4a
DIST Python-3.15.0b2.tar.xz.sigstore 5583 BLAKE2B a766583eb8340ac3bef93ac0bde0ffa66f4680361bb369b3baccd715eb24a8a1f2e5f1ba049e1e8d3c7c53f41a2fe4b0402104156f7c0609355a18dbb24c99e2 SHA512 78f437419f67b10d556ec2304e9f46af4ee0114434e1c51594ccf202aa98ae3b733f4022aeac8fc1afdeeb29fda9328f855dd4914d38318c9ec965b45358153c
DIST Python-3.15.0b3.tar.xz 35459584 BLAKE2B 613f3609775df8b899603363a5e6cce39d3e1e56451c626cf87adc6149d9bbe5d1cddce86e3d86eb521747f4f0ada226322d0d737f881d107adccfd7b8533098 SHA512 a8c73a8e373ca921c87778d011072c1a0602cc203c65acda69117189cf5bd6c277c54044af381f27c243b187bbbb7b3ef47b9318bc89e2c044de9723175d7dca
@@ -29,6 +31,7 @@ DIST python-gentoo-patches-3.12.13_p1.tar.xz 12408 BLAKE2B 2b232c2742eafcb803713
DIST python-gentoo-patches-3.13.14.tar.xz 9360 BLAKE2B 257a43992b857d44881174b36b0940fab3f879060938fe6e6464ae671832a3af624a0cc6f012e44ee344a34d0a8da0c898a29176029bfab70086434fbd3c3b99 SHA512 0084ffc35ff81a7056dd7a3624083ed957fbe482b1cbca9e401ef5851e0046b82b9102f4cf358f2974d7a7dfb3e21e96dcafe6c207417fa01834b9d10a2ee8d6
DIST python-gentoo-patches-3.14.6.tar.xz 10312 BLAKE2B 3415bb7859cdd8754987afdc7d0c793833755698a9a6b7e7b7c75d2c203109640cf5c1aff49ea38419273959479fb745cf956cae263515d82c0e7e67155be5c2 SHA512 19cb6f1424165153d2834b310ef6f8a0ac047351126191457fc0ce49238a6b21fe8a427897a5ce19bdd20076abc2189c71175981a67ab07dcbdec759b80005ab
DIST python-gentoo-patches-3.14.6_p1.tar.xz 12032 BLAKE2B 315de6cb5f346c6406e12d4cb6ccbc986e6a39dc334e5ceb4d1ba4922a336d77f0bd0167fb7ef4d1c40ce0829e03248e838dbfbd0a46c0e4e0f6cf9e999e09e8 SHA512 2ac689aa6cff138782440ce1104bf21eace756fd1a72e22590c14157390937f7f50cd1e1ca774bb5a1ff08404b74901fb55d703c39a6ff9c9165e420d1b045e9
+DIST python-gentoo-patches-3.14.7.tar.xz 10304 BLAKE2B df9214b27caaef53da93e5468faae24186d5f37b675a86289ae0161539935a509d60635cde4569efd03769e228fb7d450e396bf731db2b49d4a46e0f70df4a87 SHA512 d8313edbf5126df6ed59d4e06fb813574e4dd672ccd433e6de776a06757deda0e0495bb92e59508d86bb5ee84d2fab8141c5446f6541104b1bd80c8647a1f705
DIST python-gentoo-patches-3.15.0b2.tar.xz 3436 BLAKE2B fa2128b899f2d93078058ccd3e47b780bd092a841b07add94da61a55bb1f9846ec1fa5e00bcd78fcdd1d7da80fdf1dbabcc5d644a70cebce2018c457b186c74a SHA512 e92e87c027c8d777faae20b264cd83353dbb23d15679e99465f014277d02078b8c68fce3723e176cbebd94ac2057e5a9703f0ae5f5691e934b74947735ec3a86
DIST python-gentoo-patches-3.15.0b3.tar.xz 3432 BLAKE2B 994e9339e00dfa4b40395e763f25dde4813d791151787028dafcf2e5159c38bbe88d4b56d07fc4c7454a09bd55edfda94b9cb8cf5c0ff0ffe7db4bb1a8eea8b6 SHA512 8c3a8dea43fc42179679b1f6811979dabb4e1c34821b4aecd894d661842df26e7592f5c74787157f36ccddf9ce233994c774fbe8381dc0ccaff3dfcff0c6c572
DIST python-gentoo-patches-3.15.0b4_p1.tar.xz 4272 BLAKE2B 850ff2a20381a562da3e727fcbf4d2de88682b9ec086c31359de8a31e0aaf2b87da91d55ec7ceb690c7969d75683bd07e43f88d3bf6f33448f98674c49b404b2 SHA512 7baa9b19cb01bf6c1fc5ca5a62cd08967d4be3f697931ffc7e56da150d4d9a038b1ed212543ae334cb826f59a20ec6cc5d329db72e62fd152271817f5ded1975
diff --git a/dev-lang/python/python-3.14.7.ebuild b/dev-lang/python/python-3.14.7.ebuild
new file mode 100644
index 000000000000..1b4baba3a565
--- /dev/null
+++ b/dev-lang/python/python-3.14.7.ebuild
@@ -0,0 +1,636 @@
+# Copyright 1999-2026 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI="8"
+
+LLVM_COMPAT=( 19 )
+LLVM_OPTIONAL=1
+VERIFY_SIG_METHOD=sigstore
+WANT_LIBTOOL="none"
+
+inherit autotools check-reqs flag-o-matic linux-info llvm-r1
+inherit multiprocessing pax-utils python-utils-r1 toolchain-funcs
+inherit verify-sig
+
+MY_PV=${PV/_/}
+MY_P="Python-${MY_PV%_p*}"
+PYVER=$(ver_cut 1-2)
+PATCHSET="python-gentoo-patches-${MY_PV}"
+
+DESCRIPTION="An interpreted, interactive, object-oriented programming language"
+HOMEPAGE="
+ https://www.python.org/
+ https://github.com/python/cpython/
+"
+SRC_URI="
+ https://www.python.org/ftp/python/${PV%%_*}/${MY_P}.tar.xz
+ https://distfiles.gentoo.org/pub/proj/python/patchsets/${PYVER%t}/${PATCHSET}.tar.xz
+ verify-sig? (
+ https://www.python.org/ftp/python/${PV%%_*}/${MY_P}.tar.xz.sigstore
+ )
+"
+S="${WORKDIR}/${MY_P}"
+
+LICENSE="PSF-2"
+SLOT="${PYVER}"
+if [[ ${PV} != *_rc* ]]; then
+ KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86"
+fi
+IUSE="
+ bluetooth build debug +ensurepip examples gdbm jit libedit +ncurses pgo
+ +readline +sqlite +ssl tail-call-interp test tk valgrind
+"
+REQUIRED_USE="jit? ( ${LLVM_REQUIRED_USE} )"
+RESTRICT="!test? ( test )"
+
+# Do not add a dependency on dev-lang/python to this ebuild.
+# If you need to apply a patch which requires python for bootstrapping, please
+# run the bootstrap code on your dev box and include the results in the
+# patchset. See bug 447752.
+
+RDEPEND="
+ app-arch/bzip2:=
+ app-arch/xz-utils:=
+ app-misc/mime-types
+ >=dev-libs/expat-2.1:=
+ dev-libs/libffi:=
+ dev-libs/mpdecimal:=
+ dev-python/gentoo-common
+ sys-apps/util-linux
+ >=virtual/zlib-1.1.3:=
+ virtual/libintl
+ !build? ( app-arch/zstd:= )
+ gdbm? ( sys-libs/gdbm:=[berkdb] )
+ ncurses? ( >=sys-libs/ncurses-5.2:= )
+ readline? (
+ !libedit? ( >=sys-libs/readline-4.1:= )
+ libedit? ( dev-libs/libedit:= )
+ )
+ sqlite? ( >=dev-db/sqlite-3.3.8:3= )
+ ssl? ( >=dev-libs/openssl-1.1.1:= )
+ tk? (
+ >=dev-lang/tcl-8.0:=
+ >=dev-lang/tk-8.0:=
+ dev-tcltk/blt:=
+ dev-tcltk/tix
+ )
+"
+# bluetooth requires headers from bluez
+DEPEND="
+ ${RDEPEND}
+ bluetooth? ( net-wireless/bluez )
+ test? (
+ dev-python/ensurepip-pip
+ dev-python/ensurepip-setuptools
+ )
+ valgrind? ( dev-debug/valgrind )
+"
+# autoconf-archive needed to eautoreconf
+BDEPEND="
+ dev-build/autoconf-archive
+ app-alternatives/awk
+ virtual/pkgconfig
+ jit? (
+ $(llvm_gen_dep '
+ llvm-core/clang:${LLVM_SLOT}
+ llvm-core/llvm:${LLVM_SLOT}
+ ')
+ )
+ tail-call-interp? (
+ || (
+ >=sys-devel/gcc-16:*
+ >=llvm-core/clang-19:*
+ )
+ )
+"
+if [[ ${PV} != *_alpha* ]]; then
+ RDEPEND+="
+ dev-lang/python-exec[python_targets_python${PYVER/./_}(-)]
+ "
+fi
+PDEPEND="
+ ensurepip? ( dev-python/ensurepip-pip )
+"
+
+# https://www.python.org/downloads/metadata/sigstore/
+VERIFY_SIG_CERT_IDENTITY=hugo-+ZN9ApsXKcEdnm+yROfE0A@public.gmane.org
+VERIFY_SIG_CERT_OIDC_ISSUER=https://github.com/login/oauth
+
+# large file tests involve a 2.5G file being copied (duplicated)
+CHECKREQS_DISK_BUILD=5500M
+
+QA_PKGCONFIG_VERSION=${PYVER%t}
+# false positives -- functions specific to *BSD
+QA_CONFIG_IMPL_DECL_SKIP=( chflags lchflags )
+
+declare -rgA PYTHON_KERNEL_CHECKS=(
+ ["CROSS_MEMORY_ATTACH"]="test_external_inspection" #bug 938589
+ ["DNOTIFY"]="test_fcntl" # bug 938662
+)
+
+pkg_pretend() {
+ if use pgo || use test; then
+ check-reqs_pkg_pretend
+ fi
+
+ if use jit; then
+ ewarn "USE=jit is considered experimental upstream. Using it"
+ ewarn "could lead to unexpected breakage, including race conditions"
+ ewarn "and crashes, respectively. Please do not file Gentoo bugs, unless"
+ ewarn "you can reproduce the problem with dev-lang/python[-jit]. Instead,"
+ ewarn "please consider reporting JIT problems upstream."
+ fi
+}
+
+pkg_setup() {
+ if [[ ${MERGE_TYPE} != binary ]]; then
+ use jit && llvm-r1_pkg_setup
+ if use test || use pgo; then
+ check-reqs_pkg_setup
+
+ local CONFIG_CHECK
+ for f in "${!PYTHON_KERNEL_CHECKS[@]}"; do
+ CONFIG_CHECK+="~${f} "
+ done
+ linux-info_pkg_setup
+ fi
+ if use tail-call-interp; then
+ tc-check-min_ver gcc 16
+ tc-check-min_ver clang 19
+ fi
+ fi
+}
+
+src_unpack() {
+ if use verify-sig; then
+ verify-sig_verify_detached "${DISTDIR}"/${MY_P}.tar.xz{,.sigstore}
+ fi
+ default
+}
+
+src_prepare() {
+ # Ensure that internal copies of expat and libffi are not used.
+ # TODO: Makefile has annoying deps on expat headers
+ #rm -r Modules/expat || die
+
+ local PATCHES=(
+ "${WORKDIR}/${PATCHSET}"
+ )
+
+ default
+
+ # force the correct number of jobs
+ # https://bugs.gentoo.org/737660
+ sed -i -e "s:-j0:-j$(makeopts_jobs):" Makefile.pre.in || die
+
+ # breaks tests when using --with-wheel-pkg-dir
+ rm -r Lib/test/wheeldata || die
+
+ eautoreconf
+}
+
+build_cbuild_python() {
+ # Hack to workaround get_libdir not being able to handle CBUILD, bug #794181
+ local cbuild_libdir=$(unset PKG_CONFIG_PATH ; $(tc-getBUILD_PKG_CONFIG) --keep-system-libs --libs-only-L libffi)
+
+ # pass system CFLAGS & LDFLAGS as _NODIST, otherwise they'll get
+ # propagated to sysconfig for built extensions
+ #
+ # -fno-lto to avoid bug #700012 (not like it matters for mini-CBUILD Python anyway)
+ local -x CFLAGS_NODIST="${BUILD_CFLAGS} -fno-lto"
+ local -x LDFLAGS_NODIST="${BUILD_LDFLAGS} -fno-lto"
+ local -x CFLAGS= LDFLAGS=
+ local -x BUILD_CFLAGS="${CFLAGS_NODIST}"
+ local -x BUILD_LDFLAGS="${LDFLAGS_NODIST}"
+
+ # We need to build our own Python on CBUILD first, and feed it in.
+ # bug #847910
+ local myeconfargs_cbuild=(
+ "${myeconfargs[@]}"
+
+ --prefix="${BROOT}"/usr
+ --libdir="${cbuild_libdir:2}"
+
+ # Avoid needing to load the right libpython.so.
+ --disable-shared
+
+ # As minimal as possible for the mini CBUILD Python
+ # we build just for cross to satisfy --with-build-python.
+ --without-lto
+ --without-readline
+ --disable-optimizations
+ )
+
+ mkdir "${WORKDIR}"/${P}-${CBUILD} || die
+ pushd "${WORKDIR}"/${P}-${CBUILD} &> /dev/null || die
+
+ # Avoid as many dependencies as possible for the cross build.
+ mkdir Modules || die
+ cat > Modules/Setup.local <<-EOF || die
+ *disabled*
+ nis
+ _dbm _gdbm
+ _sqlite3
+ _hashlib _ssl
+ _curses _curses_panel
+ readline
+ _tkinter
+ pyexpat
+ zlib
+ # We disabled these for CBUILD because Python's setup.py can't handle locating
+ # libdir correctly for cross. This should be rechecked for the pure Makefile approach,
+ # and uncommented if needed.
+ #_ctypes
+ EOF
+
+ ECONF_SOURCE="${S}" econf_build "${myeconfargs_cbuild[@]}"
+
+ # Unfortunately, we do have to build this immediately, and
+ # not in src_compile, because CHOST configure for Python
+ # will check the existence of the --with-build-python value
+ # immediately.
+ emake
+ popd &> /dev/null || die
+}
+
+src_configure() {
+ # disable automagic bluetooth headers detection
+ if ! use bluetooth; then
+ local -x ac_cv_header_bluetooth_bluetooth_h=no
+ fi
+
+ filter-flags -malign-double
+
+ # Export CXX so it ends up in /usr/lib/python3.X/config/Makefile.
+ # PKG_CONFIG needed for cross.
+ tc-export CXX PKG_CONFIG
+
+ local dbmliborder=
+ if use gdbm; then
+ dbmliborder+="${dbmliborder:+:}gdbm"
+ fi
+
+ # Set baseline test skip flags.
+ COMMON_TEST_SKIPS=(
+ # running gdb inside an ebuild as non-root, within sandbox,
+ # and possibly within a container is unreliable
+ -x test_gdb
+ # this is actually test_gdb.test_pretty_print
+ -x test_pretty_print
+ # https://bugs.gentoo.org/933840
+ -x test_perf_profiler
+ )
+
+ # Arch-specific skips. See #931888 for a collection of these.
+ case ${CHOST} in
+ alpha*)
+ COMMON_TEST_SKIPS+=(
+ -x test_builtin
+ -x test_capi
+ -x test_cmath
+ -x test_float
+ # timeout
+ -x test_free_threading
+ -x test_math
+ -x test_numeric_tower
+ -x test_random
+ -x test_statistics
+ # bug 653850
+ -x test_resource
+ -x test_strtod
+ )
+ ;;
+ mips*)
+ COMMON_TEST_SKIPS+=(
+ -x test_ctypes
+ -x test_external_inspection
+ -x test_statistics
+ )
+ ;;
+ riscv*)
+ COMMON_TEST_SKIPS+=(
+ -x test_urllib2
+ )
+ ;;
+ sparc*)
+ COMMON_TEST_SKIPS+=(
+ # bug 788022
+ -x test_multiprocessing_fork
+ -x test_multiprocessing_forkserver
+ -x test_multiprocessing_spawn
+
+ -x test_ctypes
+ # bug 931908
+ -x test_exceptions
+ )
+ ;;
+ esac
+
+ # Kernel-config specific skips
+ for option in "${!PYTHON_KERNEL_CHECKS[@]}"; do
+ if ! linux_config_exists || ! linux_chkconfig_present "${option}"
+ then
+ COMMON_TEST_SKIPS+=( -x "${PYTHON_KERNEL_CHECKS[${option}]}" )
+ fi
+ done
+
+ # musl-specific skips
+ use elibc_musl && COMMON_TEST_SKIPS+=(
+ # various musl locale deficiencies
+ -x test__locale
+ -x test_c_locale_coercion
+ -x test_locale
+ -x test_re
+
+ # known issues with find_library on musl
+ # https://bugs.python.org/issue21622
+ -x test_ctypes
+
+ # fpathconf, ttyname errno values
+ -x test_os
+ )
+
+ if use pgo; then
+ local profile_task_flags=(
+ -m test
+ "-j$(makeopts_jobs)"
+ --pgo-extended
+ --verbose3
+ -u-network
+
+ # We use a timeout because of how often we've had hang issues
+ # here. It also matches the default upstream PROFILE_TASK.
+ --timeout 1200
+
+ "${COMMON_TEST_SKIPS[@]}"
+
+ -x test_dtrace
+
+ # All of these seem to occasionally hang for PGO inconsistently
+ # They'll even hang here but be fine in src_test sometimes.
+ # bug #828535 (and related: bug #788022)
+ -x test_asyncio
+ -x test_httpservers
+ -x test_logging
+ -x test_multiprocessing_fork
+ -x test_socket
+ -x test_xmlrpc
+
+ # Hangs (actually runs indefinitely executing itself w/ many cpython builds)
+ # bug #900429
+ -x test_tools
+
+ # Test terminates abruptly which corrupts written profile data
+ # bug #964023
+ -x test_pyrepl
+ )
+
+ if has_version "app-arch/rpm" ; then
+ # Avoid sandbox failure (attempts to write to /var/lib/rpm)
+ profile_task_flags+=(
+ -x test_distutils
+ )
+ fi
+ # PGO sometimes fails randomly
+ local -x PROFILE_TASK="${profile_task_flags[*]} || true"
+ fi
+
+ local myeconfargs=(
+ # glibc-2.30 removes it; since we can't cleanly force-rebuild
+ # Python on glibc upgrade, remove it proactively to give
+ # a chance for users rebuilding python before glibc
+ ac_cv_header_stropts_h=no
+
+ --enable-shared
+ --without-static-libpython
+ --enable-ipv6
+ --infodir='${prefix}/share/info'
+ --mandir='${prefix}/share/man'
+ --with-dbmliborder="${dbmliborder}"
+ --with-libc=
+ --enable-loadable-sqlite-extensions
+ --without-ensurepip
+ --without-lto
+ --with-system-expat
+ --with-system-libmpdec
+ --with-platlibdir=lib
+ --with-pkg-config=yes
+ --with-wheel-pkg-dir="${EPREFIX}"/usr/lib/python/ensurepip
+ --enable-gil
+
+ $(use_with debug assertions)
+ $(use_enable jit experimental-jit)
+ $(use_enable pgo optimizations)
+ $(use_with readline readline "$(usex libedit editline readline)")
+ $(use_with tail-call-interp)
+ $(use_with valgrind)
+ )
+
+ if tc-is-lto; then
+ myeconfargs+=(
+ --with-lto
+ )
+ fi
+
+ # Force-disable modules we don't want built.
+ # See Modules/Setup for docs on how this works. Setup.local contains our local deviations.
+ cat > Modules/Setup.local <<-EOF || die
+ *disabled*
+ nis
+ $(usev build '_zstd')
+ $(usev !gdbm '_gdbm _dbm')
+ $(usev !sqlite '_sqlite3')
+ $(usev !ssl '_hashlib _ssl')
+ $(usev !ncurses '_curses _curses_panel')
+ $(usev !readline 'readline')
+ $(usev !tk '_tkinter')
+ EOF
+
+ # disable implicit optimization/debugging flags
+ local -x OPT=
+
+ if tc-is-cross-compiler ; then
+ build_cbuild_python
+ myeconfargs+=(
+ # Point the imminent CHOST build to the Python we just
+ # built for CBUILD.
+ --with-build-python="${WORKDIR}"/${P}-${CBUILD}/python
+ )
+ fi
+
+ # pass system CFLAGS & LDFLAGS as _NODIST, otherwise they'll get
+ # propagated to sysconfig for built extensions
+ local -x CFLAGS_NODIST=${CFLAGS}
+ local -x LDFLAGS_NODIST=${LDFLAGS}
+ local -x CFLAGS= LDFLAGS=
+
+ # Fix implicit declarations on cross and prefix builds. Bug #674070.
+ if use ncurses; then
+ append-cppflags -I"${ESYSROOT}"/usr/include/ncursesw
+ fi
+
+ econf "${myeconfargs[@]}"
+
+ if grep -q "#define POSIX_SEMAPHORES_NOT_ENABLED 1" pyconfig.h; then
+ eerror "configure has detected that the sem_open function is broken."
+ eerror "Please ensure that /dev/shm is mounted as a tmpfs with mode 1777."
+ die "Broken sem_open function (bug 496328)"
+ fi
+
+ # install epython.py as part of stdlib
+ echo "EPYTHON='python${PYVER}'" > Lib/epython.py || die
+}
+
+src_compile() {
+ # Ensure sed works as expected
+ # https://bugs.gentoo.org/594768
+ local -x LC_ALL=C
+ export PYTHONSTRICTEXTENSIONBUILD=1
+
+ # Save PYTHONDONTWRITEBYTECODE so that 'has_version' doesn't
+ # end up writing bytecode & violating sandbox.
+ # bug #831897
+ local -x _PYTHONDONTWRITEBYTECODE=${PYTHONDONTWRITEBYTECODE}
+
+ # Gentoo hack to disable accessing system site-packages
+ export GENTOO_CPYTHON_BUILD=1
+
+ if use pgo ; then
+ # bug 660358
+ local -x COLUMNS=80
+ local -x PYTHONDONTWRITEBYTECODE=
+ local -x TMPDIR=/var/tmp
+ fi
+
+ # also need to clear the flags explicitly here or they end up
+ # in _sysconfigdata*
+ emake CPPFLAGS= CFLAGS= LDFLAGS=
+
+ # Restore saved value from above.
+ local -x PYTHONDONTWRITEBYTECODE=${_PYTHONDONTWRITEBYTECODE}
+
+ # Work around bug 329499. See also bug 413751 and 457194.
+ if has_version dev-libs/libffi[pax-kernel]; then
+ pax-mark E python
+ else
+ pax-mark m python
+ fi
+}
+
+src_test() {
+ # Tests will not work when cross compiling.
+ if tc-is-cross-compiler; then
+ elog "Disabling tests due to crosscompiling."
+ return
+ fi
+
+ # this just happens to skip test_support.test_freeze that is broken
+ # without bundled expat
+ # TODO: get a proper skip for it upstream
+ local -x LOGNAME=buildbot
+
+ local test_opts=(
+ --verbose3
+ -u-network
+ -j "$(makeopts_jobs)"
+ "${COMMON_TEST_SKIPS[@]}"
+ )
+
+ # bug 660358
+ local -x COLUMNS=80
+ local -x PYTHONDONTWRITEBYTECODE=
+ local -x TMPDIR=/var/tmp
+
+ nonfatal emake -Onone test EXTRATESTOPTS="${test_opts[*]}" \
+ CPPFLAGS= CFLAGS= LDFLAGS= < /dev/tty
+ local ret=${?}
+
+ [[ ${ret} -eq 0 ]] || die "emake test failed"
+}
+
+src_install() {
+ local libdir=${ED}/usr/lib/python${PYVER}
+
+ # -j1 hack for now for bug #843458
+ emake -j1 DESTDIR="${D}" TEST_MODULES=no altinstall
+
+ # Fix collisions between different slots of Python.
+ rm "${ED}/usr/$(get_libdir)/libpython3.so" || die
+
+ # Cheap hack to get version with ABIFLAGS
+ local abiver=$(cd "${ED}/usr/include"; echo python*)
+ if [[ ${abiver} != python${PYVER} ]]; then
+ # Replace python3.X with a symlink to python3.Xm
+ rm "${ED}/usr/bin/python${PYVER}" || die
+ dosym "${abiver}" "/usr/bin/python${PYVER}"
+ # Create python3.X-config symlink
+ dosym "${abiver}-config" "/usr/bin/python${PYVER}-config"
+ # Create python-3.5m.pc symlink
+ dosym "python-${PYVER}.pc" "/usr/$(get_libdir)/pkgconfig/${abiver/${PYVER}/-${PYVER}}.pc"
+ fi
+
+ # python seems to get rebuilt in src_install (bug 569908)
+ # Work around it for now.
+ if has_version dev-libs/libffi[pax-kernel]; then
+ pax-mark E "${ED}/usr/bin/${abiver}"
+ else
+ pax-mark m "${ED}/usr/bin/${abiver}"
+ fi
+
+ rm -r "${libdir}"/ensurepip/_bundled || die
+ if ! use sqlite; then
+ rm -r "${libdir}/"sqlite3 || die
+ fi
+ if ! use tk; then
+ rm -r "${ED}/usr/bin/idle${PYVER}" || die
+ rm -r "${libdir}/"{idlelib,tkinter} || die
+ fi
+
+ ln -s ../python/EXTERNALLY-MANAGED "${libdir}/EXTERNALLY-MANAGED" || die
+
+ dodoc Misc/{ACKS,HISTORY,NEWS}
+
+ if use examples; then
+ docinto examples
+ find Tools -name __pycache__ -exec rm -fr {} + || die
+ dodoc -r Tools
+ fi
+ insinto /usr/share/gdb/auto-load/usr/$(get_libdir) #443510
+ local libname=$(
+ printf 'e:\n\t@echo $(INSTSONAME)\ninclude Makefile\n' |
+ emake --no-print-directory -s -f - 2>/dev/null
+ )
+ newins Tools/gdb/libpython.py "${libname}"-gdb.py
+
+ newconfd "${FILESDIR}/pydoc.conf" pydoc-${PYVER}
+ newinitd "${FILESDIR}/pydoc.init" pydoc-${PYVER}
+ sed \
+ -e "s:@PYDOC_PORT_VARIABLE@:PYDOC${PYVER/./_}_PORT:" \
+ -e "s:@PYDOC@:pydoc${PYVER}:" \
+ -i "${ED}/etc/conf.d/pydoc-${PYVER}" \
+ "${ED}/etc/init.d/pydoc-${PYVER}" || die "sed failed"
+
+ # python-exec wrapping support
+ local pymajor=${PYVER%.*}
+ local EPYTHON=python${PYVER}
+ local scriptdir=${D}$(python_get_scriptdir)
+ mkdir -p "${scriptdir}" || die
+ # python and pythonX
+ ln -s "../../../bin/${abiver}" "${scriptdir}/python${pymajor}" || die
+ ln -s "python${pymajor}" "${scriptdir}/python" || die
+ # python-config and pythonX-config
+ # note: we need to create a wrapper rather than symlinking it due
+ # to some random dirname(argv[0]) magic performed by python-config
+ cat > "${scriptdir}/python${pymajor}-config" <<-EOF || die
+ #!/bin/sh
+ exec "${abiver}-config" "\${@}"
+ EOF
+ chmod +x "${scriptdir}/python${pymajor}-config" || die
+ ln -s "python${pymajor}-config" "${scriptdir}/python-config" || die
+ # pydoc
+ ln -s "../../../bin/pydoc${PYVER}" "${scriptdir}/pydoc" || die
+ # idle
+ if use tk; then
+ ln -s "../../../bin/idle${PYVER}" "${scriptdir}/idle" || die
+ fi
+}