repo/gentoo:master commit in: dev-lang/python/
MichaŠGórny <[email protected]>
| Newsgroups | gmane.linux.gentoo.cvs |
|---|---|
| Message-ID | <1785949600.d900f8e28024b97fc7e87e7b01e6e4afbd3b6ef2.mgorny@gentoo> |
commit: d900f8e28024b97fc7e87e7b01e6e4afbd3b6ef2
Author: Michał Górny <mgorny <AT> gentoo <DOT> org>
AuthorDate: Wed Aug 5 16:57:34 2026 +0000
Commit: Michał Górny <mgorny <AT> gentoo <DOT> org>
CommitDate: Wed Aug 5 17:06:40 2026 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=d900f8e2
dev-lang/python: Bump to 3.13.15
Signed-off-by: Michał Górny <mgorny <AT> gentoo.org>
dev-lang/python/Manifest | 3 +
dev-lang/python/python-3.13.15.ebuild | 616 ++++++++++++++++++++++++++++++++++
2 files changed, 619 insertions(+)
diff --git a/dev-lang/python/Manifest b/dev-lang/python/Manifest
index 76e3bf6b4a8b..f3ef7c2a4f5f 100644
--- a/dev-lang/python/Manifest
+++ b/dev-lang/python/Manifest
@@ -8,6 +8,8 @@ DIST Python-3.12.13.tar.xz 20801708 BLAKE2B 94b99c75e3aba1d1a953b5447f8ad6b7ebec
DIST Python-3.12.13.tar.xz.asc 963 BLAKE2B e6bc572fd207fe203cf8018bca89777c7033e46d25cc598b5715658f556d26b6f3b1652f13518850ad62a37254ab4ecf5f770197cb847306ffef96b747840e88 SHA512 903fd3baa7e29891bb00fb159ec9c43804a71002c4cd38902d25bf4e5167f856b37d211a5b1098ee60e1ea41f8a10a1596dd2382edc6d7367d55dd4154807fc7
DIST Python-3.13.14.tar.xz 23021880 BLAKE2B 8f60f704c06fbfc2ee8ae3b2aa5c74cb5941f609baf74b3625eb37929933d2a3c806e9257c7d7f860d775a94454ed3ad90f50402ddd110b8bb32c40879bf66ec SHA512 0790da65f8ce88a13b06d3b287ace5a1f36b0a8f630a3af00fbbdf93b6ef0944dea05173a20c9e1336d280ef9a97ae2b95a44a4b487a7bbb71fda53b6331c0eb
DIST Python-3.13.14.tar.xz.asc 963 BLAKE2B d500bc16d5a1a1fb999b6c98ed076077a7fa8ab55b437a676c5f20f4665d27ee4644653e55a82ab78f2be18bb38b2cfa95efe5f39d7d39db3fe6c4b227c5d6ad SHA512 a5cfab862ac03447838d13c4d1a9b085a8c8a947c958fd42cecb42929817b1448c1b23a124c87456abd43a1cadfcfb427f394eead9eaf0b84f3296fa263dba6c
+DIST Python-3.13.15.tar.xz 23160540 BLAKE2B 919260666d5e641fa174de3f9ce4dace7bc2944446d11bf2a954a77acfc8f8b18ce2517b805887d78ed970486e5c893715f4252c96bf09943044d773a05d7279 SHA512 b0ab766a3de0b4cfdbf0b93300d7330c734d3f7057577bb03e95e39da4cdade81993e769c7fa6dfdcc13b9d43a3b399d9cd89b5477b413662e9e691c1b7886b8
+DIST Python-3.13.15.tar.xz.asc 833 BLAKE2B daba95f5977f80a155effdfba3e1a8a744a739f0aa0d1f4f7d2e410cd91833c1faad1186ef50d1979ec061e4a9f0c71444955612a75b4874898c9cf571019a01 SHA512 662c00be95f62e80db43cf42099fef91f764ff7a4433cadf7eb19dedb5e4775adb12878d5ed2295fcea187731de186163ad9672ab72cde62a2335ca58ec1ad86
DIST Python-3.14.6.tar.xz 23921184 BLAKE2B d3038309c02fb260ee54a4151c67999930099455a993e8b712ec5d7cac97fcd8fc847288b0c93ca8c30d5acbf79325e6d54d16019b7daf51ade982208548386e SHA512 90a82f46c28f0fca613b67358fdc57c145ab05d20fb56bf3bc0c9e4e54947c7d30fbaa6856c41a41909237a9e601d1a7d19579d4b25c7a784ebcfe9012defc41
DIST Python-3.14.6.tar.xz.sigstore 5539 BLAKE2B f48bd02fb1588306063d2a05b905bb640b23d73a404f39c6b1100b457d71bac296aaf753f24eb25c7bf060cf73972179d6e8b123f6931e69067480ded50e5d01 SHA512 461b8b4b8af0af507681fd1dd684c3559edfcc6cd79454ee0635f8e2d1606e87528ad24c9142bca2eb1ba4a70aeb123750cb9e6c181de6675205849d8cb58a48
DIST Python-3.14.7.tar.xz 24053924 BLAKE2B 7d6988f906a402dbfc87b690f228b5fc53de024602bb459360e0482c1e323e212c71ff389b2c37bcc35248df9d9aa3bf710d3745484048cce7d4a41e5b3ea937 SHA512 3d4e2e2f983b320dec47005c408d7178d3656a6de0c4430ce21514797174b972f461200898b25d3dfac2a455019ef87e45d0fb2bb6ec2ca887124d10037a2a07
@@ -29,6 +31,7 @@ DIST python-gentoo-patches-3.10.20.tar.xz 29180 BLAKE2B 3179a983fd4f744a6d29cb34
DIST python-gentoo-patches-3.11.15.tar.xz 15988 BLAKE2B 16e98450749ebd1c617acbb9aba380fff50a8f7dba19f3f99edd3bd387c1a5d61d78cbf493cf003dfe03d2be59374ad89077b39fe203059bbbb881ae02a72ea5 SHA512 b705c72a585e315eb3ba69ffbf2a80836f0fc894fa8ae2c22768e6aa8ac2a23aada5def3d2635193793f58e3da81f0f10281c47bd8e129e1fd2c9167d292265b
DIST python-gentoo-patches-3.12.13_p1.tar.xz 12408 BLAKE2B 2b232c2742eafcb803713c837b4ddaa38f45c88e707ec272571739570f9e2e5c94644681369d887992eadf5f0c1178489f1aa3a7d8163a2aa4ce6a86732e73da SHA512 e06d78ad24c9fbc3fa9c47b25ba722342ddd140aa30f624b41d605dae40d00ab956d879a247db2d7980c063a1472de40587a0d3cd6947e560aa7e8d0e4f89309
DIST python-gentoo-patches-3.13.14.tar.xz 9360 BLAKE2B 257a43992b857d44881174b36b0940fab3f879060938fe6e6464ae671832a3af624a0cc6f012e44ee344a34d0a8da0c898a29176029bfab70086434fbd3c3b99 SHA512 0084ffc35ff81a7056dd7a3624083ed957fbe482b1cbca9e401ef5851e0046b82b9102f4cf358f2974d7a7dfb3e21e96dcafe6c207417fa01834b9d10a2ee8d6
+DIST python-gentoo-patches-3.13.15.tar.xz 9364 BLAKE2B 03cc93d5d89db0fedf92dc80e1a758b408fea4d718c7ef653b5068b791327a0d416870a362a652f21066abf17b15f682850f71473adf8e2bfc86ede4677738e5 SHA512 319805f8dad220b89c6d52bd76ba031f1c8c780c7338fdbe7fd35af685a8ee75ca2568d77863a67de64398e92c4b73beb581481846f81c24eb9f0317b81a848a
DIST python-gentoo-patches-3.14.6.tar.xz 10312 BLAKE2B 3415bb7859cdd8754987afdc7d0c793833755698a9a6b7e7b7c75d2c203109640cf5c1aff49ea38419273959479fb745cf956cae263515d82c0e7e67155be5c2 SHA512 19cb6f1424165153d2834b310ef6f8a0ac047351126191457fc0ce49238a6b21fe8a427897a5ce19bdd20076abc2189c71175981a67ab07dcbdec759b80005ab
DIST python-gentoo-patches-3.14.6_p1.tar.xz 12032 BLAKE2B 315de6cb5f346c6406e12d4cb6ccbc986e6a39dc334e5ceb4d1ba4922a336d77f0bd0167fb7ef4d1c40ce0829e03248e838dbfbd0a46c0e4e0f6cf9e999e09e8 SHA512 2ac689aa6cff138782440ce1104bf21eace756fd1a72e22590c14157390937f7f50cd1e1ca774bb5a1ff08404b74901fb55d703c39a6ff9c9165e420d1b045e9
DIST python-gentoo-patches-3.14.7.tar.xz 10304 BLAKE2B df9214b27caaef53da93e5468faae24186d5f37b675a86289ae0161539935a509d60635cde4569efd03769e228fb7d450e396bf731db2b49d4a46e0f70df4a87 SHA512 d8313edbf5126df6ed59d4e06fb813574e4dd672ccd433e6de776a06757deda0e0495bb92e59508d86bb5ee84d2fab8141c5446f6541104b1bd80c8647a1f705
diff --git a/dev-lang/python/python-3.13.15.ebuild b/dev-lang/python/python-3.13.15.ebuild
new file mode 100644
index 000000000000..d1ccb0f535b3
--- /dev/null
+++ b/dev-lang/python/python-3.13.15.ebuild
@@ -0,0 +1,616 @@
+# Copyright 1999-2026 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI="8"
+
+LLVM_COMPAT=( 18 )
+LLVM_OPTIONAL=1
+WANT_LIBTOOL="none"
+
+inherit autotools check-reqs flag-o-matic linux-info llvm-r1
+inherit multiprocessing pax-utils python-utils-r1 toolchain-funcs
+inherit verify-sig
+
+MY_PV=${PV}
+MY_P="Python-${MY_PV%_p*}"
+PYVER=$(ver_cut 1-2)
+PATCHSET="python-gentoo-patches-${MY_PV}"
+
+DESCRIPTION="An interpreted, interactive, object-oriented programming language"
+HOMEPAGE="
+ https://www.python.org/
+ https://github.com/python/cpython/
+"
+SRC_URI="
+ https://www.python.org/ftp/python/${PV%%_*}/${MY_P}.tar.xz
+ https://distfiles.gentoo.org/pub/proj/python/patchsets/${PYVER%t}/${PATCHSET}.tar.xz
+ verify-sig? (
+ https://www.python.org/ftp/python/${PV%%_*}/${MY_P}.tar.xz.asc
+ )
+"
+S="${WORKDIR}/${MY_P}"
+
+LICENSE="PSF-2"
+SLOT="${PYVER}"
+KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86"
+IUSE="
+ bluetooth debug +ensurepip examples gdbm jit libedit +ncurses pgo
+ +readline +sqlite +ssl test tk valgrind
+"
+REQUIRED_USE="jit? ( ${LLVM_REQUIRED_USE} )"
+RESTRICT="!test? ( test )"
+
+# Do not add a dependency on dev-lang/python to this ebuild.
+# If you need to apply a patch which requires python for bootstrapping, please
+# run the bootstrap code on your dev box and include the results in the
+# patchset. See bug 447752.
+
+RDEPEND="
+ app-arch/bzip2:=
+ app-arch/xz-utils:=
+ app-crypt/libb2
+ app-misc/mime-types
+ >=dev-libs/expat-2.1:=
+ dev-libs/libffi:=
+ dev-libs/mpdecimal:=
+ dev-python/gentoo-common
+ sys-apps/util-linux
+ >=virtual/zlib-1.1.3:=
+ virtual/libintl
+ gdbm? ( sys-libs/gdbm:=[berkdb] )
+ ncurses? ( >=sys-libs/ncurses-5.2:= )
+ readline? (
+ !libedit? ( >=sys-libs/readline-4.1:= )
+ libedit? ( dev-libs/libedit:= )
+ )
+ sqlite? ( >=dev-db/sqlite-3.3.8:3= )
+ ssl? ( >=dev-libs/openssl-1.1.1:= )
+ tk? (
+ >=dev-lang/tcl-8.0:=
+ >=dev-lang/tk-8.0:=
+ dev-tcltk/blt:=
+ dev-tcltk/tix
+ )
+"
+# bluetooth requires headers from bluez
+DEPEND="
+ ${RDEPEND}
+ bluetooth? ( net-wireless/bluez )
+ test? (
+ dev-python/ensurepip-pip
+ dev-python/ensurepip-setuptools
+ )
+ valgrind? ( dev-debug/valgrind )
+"
+# autoconf-archive needed to eautoreconf
+BDEPEND="
+ dev-build/autoconf-archive
+ app-alternatives/awk
+ virtual/pkgconfig
+ jit? (
+ $(llvm_gen_dep '
+ llvm-core/clang:${LLVM_SLOT}
+ llvm-core/llvm:${LLVM_SLOT}
+ ')
+ )
+ verify-sig? ( >=sec-keys/openpgp-keys-python-20260805 )
+"
+if [[ ${PV} != *_alpha* ]]; then
+ RDEPEND+="
+ dev-lang/python-exec[python_targets_python${PYVER/./_}(-)]
+ "
+fi
+PDEPEND="
+ ensurepip? ( dev-python/ensurepip-pip )
+"
+
+VERIFY_SIG_OPENPGP_KEY_PATH=/usr/share/openpgp-keys/python.org.asc
+
+# large file tests involve a 2.5G file being copied (duplicated)
+CHECKREQS_DISK_BUILD=5500M
+
+QA_PKGCONFIG_VERSION=${PYVER}
+# false positives -- functions specific to *BSD
+QA_CONFIG_IMPL_DECL_SKIP=( chflags lchflags )
+
+declare -rgA PYTHON_KERNEL_CHECKS=(
+ ["CROSS_MEMORY_ATTACH"]="test_external_inspection" #bug 938589
+ ["DNOTIFY"]="test_fcntl" # bug 938662
+)
+
+pkg_pretend() {
+ if use pgo || use test; then
+ check-reqs_pkg_pretend
+ fi
+
+ if use jit; then
+ ewarn "USE=jit is considered experimental upstream. Using it"
+ ewarn "could lead to unexpected breakage, including race conditions"
+ ewarn "and crashes, respectively. Please do not file Gentoo bugs, unless"
+ ewarn "you can reproduce the problem with dev-lang/python[-jit]. Instead,"
+ ewarn "please consider reporting JIT problems upstream."
+ fi
+}
+
+pkg_setup() {
+ if [[ ${MERGE_TYPE} != binary ]]; then
+ use jit && llvm-r1_pkg_setup
+ if use test || use pgo; then
+ check-reqs_pkg_setup
+
+ local CONFIG_CHECK
+ for f in "${!PYTHON_KERNEL_CHECKS[@]}"; do
+ CONFIG_CHECK+="~${f} "
+ done
+ linux-info_pkg_setup
+ fi
+ fi
+}
+
+src_unpack() {
+ if use verify-sig; then
+ verify-sig_verify_detached "${DISTDIR}"/${MY_P}.tar.xz{,.asc}
+ fi
+ default
+}
+
+src_prepare() {
+ # Ensure that internal copies of expat and libffi are not used.
+ # TODO: Makefile has annoying deps on expat headers
+ #rm -r Modules/expat || die
+
+ local PATCHES=(
+ "${WORKDIR}/${PATCHSET}"
+ )
+
+ default
+
+ # force the correct number of jobs
+ # https://bugs.gentoo.org/737660
+ sed -i -e "s:-j0:-j$(makeopts_jobs):" Makefile.pre.in || die
+
+ # breaks tests when using --with-wheel-pkg-dir
+ rm -r Lib/test/wheeldata || die
+
+ eautoreconf
+}
+
+build_cbuild_python() {
+ # Hack to workaround get_libdir not being able to handle CBUILD, bug #794181
+ local cbuild_libdir=$(unset PKG_CONFIG_PATH ; $(tc-getBUILD_PKG_CONFIG) --keep-system-libs --libs-only-L libffi)
+
+ # pass system CFLAGS & LDFLAGS as _NODIST, otherwise they'll get
+ # propagated to sysconfig for built extensions
+ #
+ # -fno-lto to avoid bug #700012 (not like it matters for mini-CBUILD Python anyway)
+ local -x CFLAGS_NODIST="${BUILD_CFLAGS} -fno-lto"
+ local -x LDFLAGS_NODIST="${BUILD_LDFLAGS} -fno-lto"
+ local -x CFLAGS= LDFLAGS=
+ local -x BUILD_CFLAGS="${CFLAGS_NODIST}"
+ local -x BUILD_LDFLAGS="${LDFLAGS_NODIST}"
+
+ # We need to build our own Python on CBUILD first, and feed it in.
+ # bug #847910
+ local myeconfargs_cbuild=(
+ "${myeconfargs[@]}"
+
+ --prefix="${BROOT}"/usr
+ --libdir="${cbuild_libdir:2}"
+
+ # Avoid needing to load the right libpython.so.
+ --disable-shared
+
+ # As minimal as possible for the mini CBUILD Python
+ # we build just for cross to satisfy --with-build-python.
+ --without-lto
+ --without-readline
+ --disable-optimizations
+ )
+
+ mkdir "${WORKDIR}"/${P}-${CBUILD} || die
+ pushd "${WORKDIR}"/${P}-${CBUILD} &> /dev/null || die
+
+ # Avoid as many dependencies as possible for the cross build.
+ mkdir Modules || die
+ cat > Modules/Setup.local <<-EOF || die
+ *disabled*
+ nis
+ _dbm _gdbm
+ _sqlite3
+ _hashlib _ssl
+ _curses _curses_panel
+ readline
+ _tkinter
+ pyexpat
+ zlib
+ # We disabled these for CBUILD because Python's setup.py can't handle locating
+ # libdir correctly for cross. This should be rechecked for the pure Makefile approach,
+ # and uncommented if needed.
+ #_ctypes
+ EOF
+
+ ECONF_SOURCE="${S}" econf_build "${myeconfargs_cbuild[@]}"
+
+ # Unfortunately, we do have to build this immediately, and
+ # not in src_compile, because CHOST configure for Python
+ # will check the existence of the --with-build-python value
+ # immediately.
+ emake
+ popd &> /dev/null || die
+}
+
+src_configure() {
+ # disable automagic bluetooth headers detection
+ if ! use bluetooth; then
+ local -x ac_cv_header_bluetooth_bluetooth_h=no
+ fi
+
+ filter-flags -malign-double
+
+ # Export CXX so it ends up in /usr/lib/python3.X/config/Makefile.
+ # PKG_CONFIG needed for cross.
+ tc-export CXX PKG_CONFIG
+
+ local dbmliborder=
+ if use gdbm; then
+ dbmliborder+="${dbmliborder:+:}gdbm"
+ fi
+
+ # Set baseline test skip flags.
+ COMMON_TEST_SKIPS=(
+ # running gdb inside an ebuild as non-root, within sandbox,
+ # and possibly within a container is unreliable
+ -x test_gdb
+ # this is actually test_gdb.test_pretty_print
+ -x test_pretty_print
+ # https://bugs.gentoo.org/933840
+ -x test_perf_profiler
+ )
+
+ # Arch-specific skips. See #931888 for a collection of these.
+ case ${CHOST} in
+ alpha*)
+ COMMON_TEST_SKIPS+=(
+ -x test_builtin
+ -x test_capi
+ -x test_cmath
+ -x test_float
+ # timeout
+ -x test_free_threading
+ -x test_math
+ -x test_numeric_tower
+ -x test_random
+ -x test_statistics
+ # bug 653850
+ -x test_resource
+ -x test_strtod
+ )
+ ;;
+ mips*)
+ COMMON_TEST_SKIPS+=(
+ -x test_ctypes
+ -x test_external_inspection
+ -x test_statistics
+ )
+ ;;
+ riscv*)
+ COMMON_TEST_SKIPS+=(
+ -x test_urllib2
+ )
+ ;;
+ sparc*)
+ COMMON_TEST_SKIPS+=(
+ # bug 788022
+ -x test_multiprocessing_fork
+ -x test_multiprocessing_forkserver
+ -x test_multiprocessing_spawn
+
+ -x test_ctypes
+ # bug 931908
+ -x test_exceptions
+ )
+ ;;
+ esac
+
+ # Kernel-config specific skips
+ for option in "${!PYTHON_KERNEL_CHECKS[@]}"; do
+ if ! linux_config_exists || ! linux_chkconfig_present "${option}"
+ then
+ COMMON_TEST_SKIPS+=( -x "${PYTHON_KERNEL_CHECKS[${option}]}" )
+ fi
+ done
+
+ # musl-specific skips
+ use elibc_musl && COMMON_TEST_SKIPS+=(
+ # various musl locale deficiencies
+ -x test__locale
+ -x test_c_locale_coercion
+ -x test_locale
+ -x test_re
+
+ # known issues with find_library on musl
+ # https://bugs.python.org/issue21622
+ -x test_ctypes
+
+ # fpathconf, ttyname errno values
+ -x test_os
+ )
+
+ if use pgo; then
+ local profile_task_flags=(
+ -m test
+ "-j$(makeopts_jobs)"
+ --pgo-extended
+ --verbose3
+ -u-network
+
+ # We use a timeout because of how often we've had hang issues
+ # here. It also matches the default upstream PROFILE_TASK.
+ --timeout 1200
+
+ "${COMMON_TEST_SKIPS[@]}"
+
+ -x test_dtrace
+
+ # All of these seem to occasionally hang for PGO inconsistently
+ # They'll even hang here but be fine in src_test sometimes.
+ # bug #828535 (and related: bug #788022)
+ -x test_asyncio
+ -x test_httpservers
+ -x test_logging
+ -x test_multiprocessing_fork
+ -x test_socket
+ -x test_xmlrpc
+
+ # Hangs (actually runs indefinitely executing itself w/ many cpython builds)
+ # bug #900429
+ -x test_tools
+ )
+
+ if has_version "app-arch/rpm" ; then
+ # Avoid sandbox failure (attempts to write to /var/lib/rpm)
+ profile_task_flags+=(
+ -x test_distutils
+ )
+ fi
+ # PGO sometimes fails randomly
+ local -x PROFILE_TASK="${profile_task_flags[*]} || true"
+ fi
+
+ local myeconfargs=(
+ # glibc-2.30 removes it; since we can't cleanly force-rebuild
+ # Python on glibc upgrade, remove it proactively to give
+ # a chance for users rebuilding python before glibc
+ ac_cv_header_stropts_h=no
+
+ --enable-shared
+ --without-static-libpython
+ --enable-ipv6
+ --infodir='${prefix}/share/info'
+ --mandir='${prefix}/share/man'
+ --with-dbmliborder="${dbmliborder}"
+ --with-libc=
+ --enable-loadable-sqlite-extensions
+ --without-ensurepip
+ --without-lto
+ --with-system-expat
+ --with-system-libmpdec
+ --with-platlibdir=lib
+ --with-pkg-config=yes
+ --with-wheel-pkg-dir="${EPREFIX}"/usr/lib/python/ensurepip
+ --enable-gil
+
+ $(use_with debug assertions)
+ $(use_enable jit experimental-jit)
+ $(use_enable pgo optimizations)
+ $(use_with readline readline "$(usex libedit editline readline)")
+ $(use_with valgrind)
+ )
+
+ if tc-is-lto; then
+ myeconfargs+=(
+ --with-lto
+ )
+ fi
+
+ # Force-disable modules we don't want built.
+ # See Modules/Setup for docs on how this works. Setup.local contains our local deviations.
+ cat > Modules/Setup.local <<-EOF || die
+ *disabled*
+ nis
+ $(usev !gdbm '_gdbm _dbm')
+ $(usev !sqlite '_sqlite3')
+ $(usev !ssl '_hashlib _ssl')
+ $(usev !ncurses '_curses _curses_panel')
+ $(usev !readline 'readline')
+ $(usev !tk '_tkinter')
+ EOF
+
+ # disable implicit optimization/debugging flags
+ local -x OPT=
+
+ if tc-is-cross-compiler ; then
+ build_cbuild_python
+ myeconfargs+=(
+ # Point the imminent CHOST build to the Python we just
+ # built for CBUILD.
+ --with-build-python="${WORKDIR}"/${P}-${CBUILD}/python
+ )
+ fi
+
+ # pass system CFLAGS & LDFLAGS as _NODIST, otherwise they'll get
+ # propagated to sysconfig for built extensions
+ local -x CFLAGS_NODIST=${CFLAGS}
+ local -x LDFLAGS_NODIST=${LDFLAGS}
+ local -x CFLAGS= LDFLAGS=
+
+ # Fix implicit declarations on cross and prefix builds. Bug #674070.
+ if use ncurses; then
+ append-cppflags -I"${ESYSROOT}"/usr/include/ncursesw
+ fi
+
+ econf "${myeconfargs[@]}"
+
+ if grep -q "#define POSIX_SEMAPHORES_NOT_ENABLED 1" pyconfig.h; then
+ eerror "configure has detected that the sem_open function is broken."
+ eerror "Please ensure that /dev/shm is mounted as a tmpfs with mode 1777."
+ die "Broken sem_open function (bug 496328)"
+ fi
+
+ # install epython.py as part of stdlib
+ echo "EPYTHON='python${PYVER}'" > Lib/epython.py || die
+}
+
+src_compile() {
+ # Ensure sed works as expected
+ # https://bugs.gentoo.org/594768
+ local -x LC_ALL=C
+ export PYTHONSTRICTEXTENSIONBUILD=1
+
+ # Save PYTHONDONTWRITEBYTECODE so that 'has_version' doesn't
+ # end up writing bytecode & violating sandbox.
+ # bug #831897
+ local -x _PYTHONDONTWRITEBYTECODE=${PYTHONDONTWRITEBYTECODE}
+
+ # Gentoo hack to disable accessing system site-packages
+ export GENTOO_CPYTHON_BUILD=1
+
+ if use pgo ; then
+ # bug 660358
+ local -x COLUMNS=80
+ local -x PYTHONDONTWRITEBYTECODE=
+ local -x TMPDIR=/var/tmp
+ fi
+
+ # also need to clear the flags explicitly here or they end up
+ # in _sysconfigdata*
+ emake CPPFLAGS= CFLAGS= LDFLAGS=
+
+ # Restore saved value from above.
+ local -x PYTHONDONTWRITEBYTECODE=${_PYTHONDONTWRITEBYTECODE}
+
+ # Work around bug 329499. See also bug 413751 and 457194.
+ if has_version dev-libs/libffi[pax-kernel]; then
+ pax-mark E python
+ else
+ pax-mark m python
+ fi
+}
+
+src_test() {
+ # Tests will not work when cross compiling.
+ if tc-is-cross-compiler; then
+ elog "Disabling tests due to crosscompiling."
+ return
+ fi
+
+ # this just happens to skip test_support.test_freeze that is broken
+ # without bundled expat
+ # TODO: get a proper skip for it upstream
+ local -x LOGNAME=buildbot
+
+ local test_opts=(
+ --verbose3
+ -u-network
+ -j "$(makeopts_jobs)"
+ "${COMMON_TEST_SKIPS[@]}"
+ )
+
+ # bug 660358
+ local -x COLUMNS=80
+ local -x PYTHONDONTWRITEBYTECODE=
+ local -x TMPDIR=/var/tmp
+
+ nonfatal emake -Onone test EXTRATESTOPTS="${test_opts[*]}" \
+ CPPFLAGS= CFLAGS= LDFLAGS= < /dev/tty
+ local ret=${?}
+
+ [[ ${ret} -eq 0 ]] || die "emake test failed"
+}
+
+src_install() {
+ local libdir=${ED}/usr/lib/python${PYVER}
+
+ # -j1 hack for now for bug #843458
+ emake -j1 DESTDIR="${D}" TEST_MODULES=no altinstall
+
+ # Fix collisions between different slots of Python.
+ rm "${ED}/usr/$(get_libdir)/libpython3.so" || die
+
+ # Cheap hack to get version with ABIFLAGS
+ local abiver=$(cd "${ED}/usr/include"; echo python*)
+ if [[ ${abiver} != python${PYVER} ]]; then
+ # Replace python3.X with a symlink to python3.Xm
+ rm "${ED}/usr/bin/python${PYVER}" || die
+ dosym "${abiver}" "/usr/bin/python${PYVER}"
+ # Create python3.X-config symlink
+ dosym "${abiver}-config" "/usr/bin/python${PYVER}-config"
+ # Create python-3.5m.pc symlink
+ dosym "python-${PYVER}.pc" "/usr/$(get_libdir)/pkgconfig/${abiver/${PYVER}/-${PYVER}}.pc"
+ fi
+
+ # python seems to get rebuilt in src_install (bug 569908)
+ # Work around it for now.
+ if has_version dev-libs/libffi[pax-kernel]; then
+ pax-mark E "${ED}/usr/bin/${abiver}"
+ else
+ pax-mark m "${ED}/usr/bin/${abiver}"
+ fi
+
+ rm -r "${libdir}"/ensurepip/_bundled || die
+ if ! use sqlite; then
+ rm -r "${libdir}/"sqlite3 || die
+ fi
+ if ! use tk; then
+ rm -r "${ED}/usr/bin/idle${PYVER}" || die
+ rm -r "${libdir}/"{idlelib,tkinter} || die
+ fi
+
+ ln -s ../python/EXTERNALLY-MANAGED "${libdir}/EXTERNALLY-MANAGED" || die
+
+ dodoc Misc/{ACKS,HISTORY,NEWS}
+
+ if use examples; then
+ docinto examples
+ find Tools -name __pycache__ -exec rm -fr {} + || die
+ dodoc -r Tools
+ fi
+ insinto /usr/share/gdb/auto-load/usr/$(get_libdir) #443510
+ local libname=$(
+ printf 'e:\n\t@echo $(INSTSONAME)\ninclude Makefile\n' |
+ emake --no-print-directory -s -f - 2>/dev/null
+ )
+ newins Tools/gdb/libpython.py "${libname}"-gdb.py
+
+ newconfd "${FILESDIR}/pydoc.conf" pydoc-${PYVER}
+ newinitd "${FILESDIR}/pydoc.init" pydoc-${PYVER}
+ sed \
+ -e "s:@PYDOC_PORT_VARIABLE@:PYDOC${PYVER/./_}_PORT:" \
+ -e "s:@PYDOC@:pydoc${PYVER}:" \
+ -i "${ED}/etc/conf.d/pydoc-${PYVER}" \
+ "${ED}/etc/init.d/pydoc-${PYVER}" || die "sed failed"
+
+ # python-exec wrapping support
+ local pymajor=${PYVER%.*}
+ local EPYTHON=python${PYVER}
+ local scriptdir=${D}$(python_get_scriptdir)
+ mkdir -p "${scriptdir}" || die
+ # python and pythonX
+ ln -s "../../../bin/${abiver}" "${scriptdir}/python${pymajor}" || die
+ ln -s "python${pymajor}" "${scriptdir}/python" || die
+ # python-config and pythonX-config
+ # note: we need to create a wrapper rather than symlinking it due
+ # to some random dirname(argv[0]) magic performed by python-config
+ cat > "${scriptdir}/python${pymajor}-config" <<-EOF || die
+ #!/bin/sh
+ exec "${abiver}-config" "\${@}"
+ EOF
+ chmod +x "${scriptdir}/python${pymajor}-config" || die
+ ln -s "python${pymajor}-config" "${scriptdir}/python-config" || die
+ # pydoc
+ ln -s "../../../bin/pydoc${PYVER}" "${scriptdir}/pydoc" || die
+ # idle
+ if use tk; then
+ ln -s "../../../bin/idle${PYVER}" "${scriptdir}/idle" || die
+ fi
+}