repo/gentoo:master commit in: app-containers/docker/

commit:     c64fe6b1ac8265b0c6ec206103d7bd7cf418def5
Author:     Arthur Zamarin <arthurzam <AT> gentoo <DOT> org>
AuthorDate: Thu Aug  6 19:12:53 2026 +0000
Commit:     Arthur Zamarin <arthurzam <AT> gentoo <DOT> org>
CommitDate: Thu Aug  6 19:23:06 2026 +0000
URL:        https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=c64fe6b1

app-containers/docker: add 29.7.2

Signed-off-by: Arthur Zamarin <arthurzam <AT> gentoo.org>

 app-containers/docker/Manifest             |   1 +
 app-containers/docker/docker-29.7.2.ebuild | 337 +++++++++++++++++++++++++++++
 2 files changed, 338 insertions(+)

diff --git a/app-containers/docker/Manifest b/app-containers/docker/Manifest
index d3b72581dc0e..eadb535aae5b 100644
--- a/app-containers/docker/Manifest
+++ b/app-containers/docker/Manifest
@@ -5,3 +5,4 @@ DIST docker-28.2.2.tar.gz 17861904 BLAKE2B 6f55e96d653579b749908080550ebee063554
 DIST docker-28.4.0.tar.gz 18066393 BLAKE2B 70c9910bec169994ddd39f46e4a7042e5f38a3b76e8a43389ee934fb7f3c75ae686f32ad7f3cbc0dcff210b5c0eeed24674db0fdf4e845e78c330cf6c2b75918 SHA512 a98f8012547dc1e61e6a4f420355d29fbd6f6ddb5642601d8762099768e0b284fcf129ee31af155049731f61f43ff4efe42313467055dae32337dc5cc8c8cf78
 DIST docker-29.1.3.tar.gz 19491833 BLAKE2B ded1a1832b1ce037776e04855a0ea7c3f45981df41bdace54c3b84496a2990b0450ed62b34a6f3c289dec2643d28a7563c9afba55c88fc0e1cc4fb7855220800 SHA512 e3fa96057beb2849fea6e4fd480b08ffbe9b74b851060901e54e57aa62938888b260b7cef4cee33d4cffd965fabc0db7fc0aa5aeeae9aa6b9870c3dbcf7b6ec3
 DIST docker-29.5.2.tar.gz 21115630 BLAKE2B f47b730a470c0ab4868beb6d4187b9ff34d06ecf4f381f3e89b89e6f9b18b5bf4c9220ee2e0d6977d4b2b0dfddd4fb9f7e171316dcb2935428bfc9ca350dd17f SHA512 c5cbb956711e9ce8dbab010bf1eab3fd9b35e35806188e3030a3bbeafb545f4024504577df7c39588672c8d5252f6ab071bcfd6377867f4668b75855571469fb
+DIST docker-29.7.2.tar.gz 22043949 BLAKE2B 78bd52de33f2ecbc4272150add52b4b293629aeae2aa746f32c5134c2905a93cfc92db65510f707621689d8794c6a759952b58bd50a3852149cbeeab3f29d12c SHA512 f04e264c499854525ed7ef694ebea3c9fd449c6a538ed449e228728b87b654c86962d639fad45081d328db749f58493e18286217d2d95ca492028b79c99c0beb

diff --git a/app-containers/docker/docker-29.7.2.ebuild b/app-containers/docker/docker-29.7.2.ebuild
new file mode 100644
index 000000000000..045910e450c0
--- /dev/null
+++ b/app-containers/docker/docker-29.7.2.ebuild
@@ -0,0 +1,337 @@
+# Copyright 1999-2026 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=8
+
+MY_PV=${PV/_/-}
+
+inherit go-module linux-info optfeature systemd toolchain-funcs udev
+
+GIT_COMMIT=6a43e3d5afddf4111da0f864bbc7cae5d7e95001
+
+DESCRIPTION="The core functions you need to create Docker images and run Docker containers"
+HOMEPAGE="https://www.docker.com/"
+SRC_URI="https://github.com/moby/moby/archive/${PN}-v${MY_PV}.tar.gz -> ${P}.tar.gz"
+S="${WORKDIR}/moby-${PN}-v${PV}"
+
+LICENSE="Apache-2.0"
+SLOT="0"
+KEYWORDS="~amd64 ~arm ~arm64 ~ppc64 ~riscv ~x86"
+IUSE="apparmor btrfs +container-init cuda +overlay2 seccomp selinux systemd"
+
+DEPEND="
+	acct-group/docker
+	>=dev-db/sqlite-3.7.9:3
+	net-firewall/nftables:=
+	apparmor? ( sys-libs/libapparmor )
+	btrfs? ( >=sys-fs/btrfs-progs-3.16.1 )
+	seccomp? ( >=sys-libs/libseccomp-2.2.1 )
+	systemd? ( sys-apps/systemd )
+"
+
+# https://github.com/moby/moby/blob/master/project/PACKAGERS.md#runtime-dependencies
+# https://github.com/moby/moby/blob/master/project/PACKAGERS.md#optional-dependencies
+RDEPEND="
+	${DEPEND}
+	sys-process/procps
+	>=dev-vcs/git-1.7
+	>=app-arch/xz-utils-4.9
+	>=app-containers/containerd-2.2.0[apparmor?,btrfs?,seccomp?]
+	>=app-containers/runc-1.2.6[apparmor?,seccomp?]
+	!app-containers/docker-proxy
+	!<app-containers/docker-cli-${PV}
+	container-init? ( >=sys-process/tini-0.19.0[static] )
+	cuda? ( app-containers/nvidia-container-toolkit )
+	selinux? ( sec-policy/selinux-docker )
+"
+
+# https://github.com/docker/docker/blob/master/project/PACKAGERS.md#build-dependencies
+BDEPEND="
+	dev-go/go-md2man
+	virtual/pkgconfig
+	>=dev-lang/go-1.26.3
+"
+# tests require running dockerd as root and downloading containers
+RESTRICT="installsources strip test"
+
+# https://bugs.gentoo.org/748984 https://github.com/etcd-io/etcd/pull/12552
+pkg_setup() {
+	# this is based on "contrib/check-config.sh" from upstream's sources
+	# required features.
+	CONFIG_CHECK="
+		~NAMESPACES ~NET_NS ~PID_NS ~IPC_NS ~UTS_NS
+		~CGROUPS ~CGROUP_CPUACCT ~CGROUP_DEVICE ~CGROUP_FREEZER ~CGROUP_SCHED ~CPUSETS ~MEMCG
+		~KEYS
+		~VETH ~BRIDGE ~BRIDGE_NETFILTER
+		~IP_NF_FILTER ~IP_NF_RAW ~IP_NF_TARGET_MASQUERADE
+		~NETFILTER_XT_MATCH_ADDRTYPE
+		~NETFILTER_XT_MATCH_CONNTRACK
+		~NETFILTER_XT_MATCH_IPVS
+		~NETFILTER_XT_MARK
+		~IP_NF_NAT ~NF_NAT
+		~POSIX_MQUEUE
+	"
+	WARNING_POSIX_MQUEUE="CONFIG_POSIX_MQUEUE: is required for bind-mounting /dev/mqueue into containers"
+
+	if kernel_is ge 6 17; then
+		CONFIG_CHECK+="
+			~IP_NF_IPTABLES_LEGACY
+			~NETFILTER_XTABLES_LEGACY
+		"
+	fi
+
+	if kernel_is lt 4 8; then
+		CONFIG_CHECK+="
+			~DEVPTS_MULTIPLE_INSTANCES
+		"
+	fi
+
+	if kernel_is le 5 1; then
+		CONFIG_CHECK+="
+			~NF_NAT_IPV4
+		"
+	fi
+
+	if kernel_is le 5 2; then
+		CONFIG_CHECK+="
+			~NF_NAT_NEEDED
+		"
+	fi
+
+	if kernel_is ge 4 15; then
+		CONFIG_CHECK+="
+			~CGROUP_BPF
+		"
+	fi
+
+	# optional features
+	CONFIG_CHECK+="
+		~USER_NS
+	"
+
+	if use seccomp; then
+		CONFIG_CHECK+="
+			~SECCOMP ~SECCOMP_FILTER
+		"
+	fi
+
+	CONFIG_CHECK+="
+		~CGROUP_PIDS
+	"
+
+	if kernel_is lt 6 1; then
+		CONFIG_CHECK+="
+			~MEMCG_SWAP
+			"
+	fi
+
+	if kernel_is le 5 8; then
+		CONFIG_CHECK+="
+			~MEMCG_SWAP_ENABLED
+		"
+	fi
+
+	CONFIG_CHECK+="
+		~!LEGACY_VSYSCALL_NATIVE
+		"
+	if kernel_is lt 5 19; then
+		CONFIG_CHECK+="
+			~LEGACY_VSYSCALL_EMULATE
+			"
+	fi
+	CONFIG_CHECK+="
+		~!LEGACY_VSYSCALL_NONE
+		"
+	WARNING_LEGACY_VSYSCALL_NONE="CONFIG_LEGACY_VSYSCALL_NONE enabled: \
+		Containers with <=glibc-2.13 will not work"
+
+	if kernel_is le 4 5; then
+		CONFIG_CHECK+="
+			~MEMCG_KMEM
+		"
+	fi
+
+	if kernel_is lt 5; then
+		CONFIG_CHECK+="
+			~IOSCHED_CFQ ~CFQ_GROUP_IOSCHED
+		"
+	fi
+
+	CONFIG_CHECK+="
+		~BLK_CGROUP ~BLK_DEV_THROTTLING
+		~CGROUP_PERF
+		~CGROUP_HUGETLB
+		~NET_CLS_CGROUP ~CGROUP_NET_PRIO
+		~CFS_BANDWIDTH ~FAIR_GROUP_SCHED
+		~IP_NF_TARGET_REDIRECT
+		~IP_VS
+		~IP_VS_NFCT
+		~IP_VS_PROTO_TCP
+		~IP_VS_PROTO_UDP
+		~IP_VS_RR
+		"
+
+	if use selinux; then
+		CONFIG_CHECK+="
+			~SECURITY_SELINUX
+			"
+	fi
+
+	if use apparmor; then
+		CONFIG_CHECK+="
+			~SECURITY_APPARMOR
+			"
+	fi
+
+	# if ! is_set EXT4_USE_FOR_EXT2; then
+	#	check_flags EXT3_FS EXT3_FS_XATTR EXT3_FS_POSIX_ACL EXT3_FS_SECURITY
+	#	if ! is_set EXT3_FS || ! is_set EXT3_FS_XATTR || ! is_set EXT3_FS_POSIX_ACL || ! is_set EXT3_FS_SECURITY; then
+	#		echo "    $(wrap_color '(enable these ext3 configs if you are using ext3 as backing filesystem)' bold black)"
+	#	fi
+	# fi
+
+	CONFIG_CHECK+="
+		~EXT4_FS ~EXT4_FS_POSIX_ACL ~EXT4_FS_SECURITY
+	"
+
+	# if ! is_set EXT4_FS || ! is_set EXT4_FS_POSIX_ACL || ! is_set EXT4_FS_SECURITY; then
+	#	if is_set EXT4_USE_FOR_EXT2; then
+	#		echo "    $(wrap_color 'enable these ext4 configs if you are using ext3 or ext4 as backing filesystem' bold black)"
+	#	else
+	#		echo "    $(wrap_color 'enable these ext4 configs if you are using ext4 as backing filesystem' bold black)"
+	#	fi
+	# fi
+
+	# network drivers
+	CONFIG_CHECK+="
+		~VXLAN ~BRIDGE_VLAN_FILTERING
+		~CRYPTO ~CRYPTO_AEAD ~CRYPTO_GCM ~CRYPTO_SEQIV ~CRYPTO_GHASH
+		~XFRM ~XFRM_USER ~XFRM_ALGO ~INET_ESP
+	"
+	if kernel_is le 5 3; then
+		CONFIG_CHECK+="
+			~INET_XFRM_MODE_TRANSPORT
+		"
+	fi
+
+	CONFIG_CHECK+="
+		~IPVLAN
+		"
+	CONFIG_CHECK+="
+		~MACVLAN ~DUMMY
+		"
+	CONFIG_CHECK+="
+		~NF_NAT_FTP ~NF_CONNTRACK_FTP ~NF_NAT_TFTP ~NF_CONNTRACK_TFTP
+	"
+
+	# storage drivers
+	if use btrfs; then
+		CONFIG_CHECK+="
+			~BTRFS_FS
+			~BTRFS_FS_POSIX_ACL
+		"
+	fi
+
+	CONFIG_CHECK+="
+		~OVERLAY_FS
+	"
+
+	linux-info_pkg_setup
+}
+
+src_unpack() {
+	default
+	go-module_src_unpack
+	cd "${S}"
+	[[ -f go.mod ]] || ln -s vendor.mod go.mod || die
+	[[ -f go.sum ]] || ln -s vendor.sum go.sum || die
+}
+
+src_compile() {
+	export DOCKER_GITCOMMIT="${GIT_COMMIT}"
+	export VERSION=${PV}
+	tc-export PKG_CONFIG
+
+	# setup CFLAGS and LDFLAGS for separate build target
+	# see https://github.com/tianon/docker-overlay/pull/10
+	CGO_CFLAGS+=" -I${ESYSROOT}/usr/include"
+	CGO_LDFLAGS+=" -L${ESYSROOT}/usr/$(get_libdir)"
+
+	# let's set up some optional features :)
+	export DOCKER_BUILDTAGS=''
+	for gd in btrfs overlay2; do
+		if ! use $gd; then
+			DOCKER_BUILDTAGS+=" exclude_graphdriver_${gd//-/}"
+		fi
+	done
+
+	for tag in apparmor seccomp; do
+		if use $tag; then
+			DOCKER_BUILDTAGS+=" $tag"
+		fi
+	done
+
+	export AUTO_GOPATH=1
+	export EXCLUDE_AUTO_BUILDTAG_JOURNALD=$(usex systemd '' 'y')
+	export GO_MD2MAN=/usr/bin/go-md2man
+
+	# build binaries
+	./hack/make.sh dynbinary || die 'dynbinary failed'
+
+	# build man page
+	cd man || die
+	emake || die
+}
+
+src_install() {
+	dosym containerd /usr/bin/docker-containerd
+	dosym containerd-shim-runc-v2 /usr/bin/docker-containerd-shim
+	dosym runc /usr/bin/docker-runc
+	use container-init && dosym tini /usr/bin/docker-init
+	dobin bundles/dynbinary-daemon/dockerd
+	dobin bundles/dynbinary-daemon/docker-proxy
+	for f in dockerd-rootless-setuptool.sh dockerd-rootless.sh; do
+		dosym ../share/docker/contrib/${f} /usr/bin/${f}
+	done
+
+	newinitd contrib/init/openrc/docker.initd docker
+	newconfd contrib/init/openrc/docker.confd docker
+
+	systemd_dounit contrib/init/systemd/docker.{service,socket}
+
+	dodoc AUTHORS CONTRIBUTING.md NOTICE README.md
+	dodoc -r docs/*
+	doman man/man8/dockerd.8
+
+	# note: intentionally not using "doins" so that we preserve +x bits
+	dodir /usr/share/${PN}/contrib
+	cp -R contrib/* "${ED}/usr/share/${PN}/contrib"
+}
+
+pkg_postinst() {
+	udev_reload
+
+	elog
+	elog "To use Docker, the Docker daemon must be running as root. To automatically"
+	elog "start the Docker daemon at boot:"
+	if systemd_is_booted || has_version sys-apps/systemd; then
+		elog "  systemctl enable docker.service"
+	else
+		elog "  rc-update add docker default"
+	fi
+	elog
+	elog "To use Docker as a non-root user, add yourself to the 'docker' group:"
+	elog '  usermod -aG docker <youruser>'
+	elog
+
+	if has_version sys-fs/zfs; then
+		elog " ZFS storage driver is available"
+		elog " Check https://docs.docker.com/storage/storagedriver/zfs-driver for more info"
+		elog
+	fi
+
+	optfeature "rootless mode support" sys-apps/shadow
+	optfeature "rootless mode support" sys-apps/rootlesskit
+	optfeature_header "for rootless mode you also need a network stack"
+	optfeature "rootless mode network stack" app-containers/slirp4netns
+}