repo/gentoo:master commit in: sys-devel/binutils-hppa64/
"Sam James" <[email protected]>
| Newsgroups | gmane.linux.gentoo.cvs |
|---|---|
| Message-ID | <1786146438.323ba3019c08e2eb130d1f7d52935e67ea1290aa.sam@gentoo> |
commit: 323ba3019c08e2eb130d1f7d52935e67ea1290aa
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Fri Aug 7 23:46:24 2026 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Fri Aug 7 23:47:18 2026 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=323ba301
sys-devel/binutils-hppa64: add 2.47
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-devel/binutils-hppa64/Manifest | 3 +
.../binutils-hppa64/binutils-hppa64-2.47.ebuild | 584 +++++++++++++++++++++
2 files changed, 587 insertions(+)
diff --git a/sys-devel/binutils-hppa64/Manifest b/sys-devel/binutils-hppa64/Manifest
index ab1a9d848a1b..fa7d09d72145 100644
--- a/sys-devel/binutils-hppa64/Manifest
+++ b/sys-devel/binutils-hppa64/Manifest
@@ -24,3 +24,6 @@ DIST binutils-2.46.0.tar.xz 28548776 BLAKE2B 9f4fd8897d237eb5003bdf439537dfc5f8c
DIST binutils-2.46.1-patches-1.tar.xz 6916 BLAKE2B 4588923757470819d7d0f344b8c1472bad7fc5f53e776a7843d11112a74a71dcaf6849b88685368503fac0315897c662ccd99f94ca7ee8a2e1d1382ddc0b7b44 SHA512 b0fe0aa0c7ac11a1152d05733c939ccf0a51b4295c90bb80fc25db882adbef1d5f50eafab7f9b68d15ac664b9b941e46bc4e7d8577ee9233558c6bb0a0c451ee
DIST binutils-2.46.1.tar.xz 28636456 BLAKE2B a5a0578281d6315a43437ccf7636b3b91185c2706f1582b22af6973f55a86f5b4bc7eb03aa9ceaec547070152c08c982bc40ee9ce07679f2e3bb49e050bae76c SHA512 a5c65e56e400ed3fb8906a995dbb93eb5bea54b16344244653d7f44ef29ceb60270da263b19d25302c37759784e14fcb4b9421b29e0e2c7f450bd99f6bb4595c
DIST binutils-2.46.1.tar.xz.sig 395 BLAKE2B 5c8d5fc9fd3abf8de72e603d5f529d8fdef2345851d6af6644e443e95e50558a6b2006914edf54094178075b1ed9e51a630773b7c74e7b421eacba4bb8028a29 SHA512 e7746a14c74a04cee1a7b82bd463ff42f304e3646e4808a03ac7ee8d367a61627297c30816f008b919b8db7cc706062d927f424a787e0f1da3ad432ec18cfa0f
+DIST binutils-2.47-patches-1.tar.xz 9736 BLAKE2B 8a0aad0635792c5474b7ddeda234e146b57cebf3346474fbd1e53c3f9f30df317be1363967cffbd46605adc302a172bf2eec5d94a256169eb1ccbd2b309b4a32 SHA512 82986da3abcc0e751d0dcd8df1615688906d7d5b01490969fe4afbc4b400c79b6eb35afd09c56668f930e67082ec751895a635af42021a9162f3fcaa84eda11b
+DIST binutils-2.47.tar.xz 29034716 BLAKE2B 329cae8792c500c71d8cce03aab127e8d77f1d409f74872082e64df5163e5c730fe585f8f9c21905cb6227cae18e6675ae4caed653223a26b5d9d4fdb90910ea SHA512 3126a1064374d8da40d4d70630c204ed1e75d542c447d53fca9778c7ceff095c28e9b445e15a313fef9729082d7966471ee6b5b715d479aa6d568528743e1d98
+DIST binutils-2.47.tar.xz.sig 833 BLAKE2B 3a3cd16813153eeba88e604d3137c695cba91132ac89ec26a0d82e35332028db3302954f5812120d5e79379a21670a33703b571315970a9570759fd3cf03088d SHA512 ca3e62d4746da129405c7d69e757f295aed68fbe267c9efc8d248cf2ce98fde55d953e663896507db494dbbaa5a904cd82d159ef9d9b26944e047bff1e40439c
diff --git a/sys-devel/binutils-hppa64/binutils-hppa64-2.47.ebuild b/sys-devel/binutils-hppa64/binutils-hppa64-2.47.ebuild
new file mode 100644
index 000000000000..3af6a4211ee2
--- /dev/null
+++ b/sys-devel/binutils-hppa64/binutils-hppa64-2.47.ebuild
@@ -0,0 +1,584 @@
+# Copyright 1999-2026 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=8
+
+export CTARGET=hppa64-${CHOST#*-}
+
+inherit libtool flag-o-matic gnuconfig strip-linguas toolchain-funcs
+
+DESCRIPTION="Tools necessary to build programs"
+HOMEPAGE="https://sourceware.org/binutils/"
+
+LICENSE="GPL-3+"
+IUSE="cet +debuginfod doc gprofng hardened multitarget +nls pgo +plugins static-libs test vanilla xxhash zstd"
+
+# Variables that can be set here (ignored for live ebuilds)
+# PATCH_VER - the patchset version
+# Default: empty, no patching
+# PATCH_BINUTILS_VER - the binutils version in the patchset name
+# - Default: PV
+# PATCH_DEV - Use download URI https://dev.gentoo.org/~{PATCH_DEV}/distfiles/...
+# for the patchsets
+
+PATCH_VER=1
+
+if [[ ${PV} == 9999 ]]; then
+ inherit git-r3
+ SLOT=${PV}
+elif [[ ${PV} == *9999 ]]; then
+ inherit git-r3
+ SLOT=$(ver_cut 1-2)
+else
+ VERIFY_SIG_OPENPGP_KEY_PATH=/usr/share/openpgp-keys/binutils.asc
+ inherit verify-sig
+ PATCH_BINUTILS_VER=${PATCH_BINUTILS_VER:-${PV}}
+ PATCH_DEV=${PATCH_DEV:-dilfridge}
+ SRC_URI="
+ mirror://gnu/binutils/binutils-${PV}.tar.xz
+ https://sourceware.org/pub/binutils/releases/binutils-${PV}.tar.xz
+ verify-sig? ( mirror://gnu/binutils/binutils-${PV}.tar.xz.sig )
+ "
+ [[ -z ${PATCH_VER} ]] || SRC_URI+=" https://distfiles.gentoo.org/pub/proj/toolchain/binutils/patches/binutils-${PATCH_BINUTILS_VER}-patches-${PATCH_VER}.tar.xz"
+ SLOT=$(ver_cut 1-2)
+ KEYWORDS="-* ~hppa"
+
+ BDEPEND="verify-sig? ( sec-keys/openpgp-keys-binutils )"
+fi
+
+#
+# The cross-compile logic
+#
+export CTARGET=${CTARGET:-${CHOST}}
+if [[ ${CTARGET} == ${CHOST} ]] ; then
+ if [[ ${CATEGORY} == cross-* ]] ; then
+ export CTARGET=${CATEGORY#cross-}
+ fi
+fi
+is_cross() { [[ ${CHOST} != ${CTARGET} ]] ; }
+
+#
+# The dependencies
+#
+RDEPEND="
+ >=sys-devel/binutils-config-3
+ virtual/zlib:=
+ debuginfod? (
+ dev-libs/elfutils[debuginfod(-)]
+ )
+ zstd? ( app-arch/zstd:= )
+"
+DEPEND="
+ ${RDEPEND}
+ xxhash? ( dev-libs/xxhash )
+"
+BDEPEND+="
+ doc? ( sys-apps/texinfo )
+ pgo? (
+ dev-util/dejagnu
+ app-alternatives/bc
+ )
+ test? (
+ dev-util/dejagnu
+ app-alternatives/bc
+ )
+ nls? ( sys-devel/gettext )
+ zstd? ( virtual/pkgconfig )
+ app-alternatives/lex
+ app-alternatives/yacc
+"
+
+RESTRICT="!test? ( test )"
+
+MY_BUILDDIR="${WORKDIR}"/build
+S="${WORKDIR}"/${P/-hppa64/}
+
+src_unpack() {
+ if [[ ${PV} == *9999 ]] ; then
+ EGIT_REPO_URI="
+ https://anongit.gentoo.org/git/proj/toolchain/binutils-patches.git
+ https://github.com/gentoo/binutils-patches
+ "
+ EGIT_CHECKOUT_DIR=${WORKDIR}/patches-git
+ git-r3_src_unpack
+ mv patches-git/9999 patches || die
+
+ if [[ ${PV} != 9999 ]] ; then
+ EGIT_BRANCH=binutils-$(ver_cut 1)_$(ver_cut 2)-branch
+ fi
+ EGIT_REPO_URI="
+ https://sourceware.org/git/binutils-gdb.git
+ https://git.sr.ht/~sourceware/binutils-gdb
+ https://gitlab.com/x86-binutils/binutils-gdb.git
+ "
+ S=${WORKDIR}/binutils
+ EGIT_CHECKOUT_DIR=${S}
+ git-r3_src_unpack
+ else
+ use verify-sig && verify-sig_verify_detached "${DISTDIR}"/${P/-hppa64/}.tar.xz{,.sig}
+ unpack ${P/-hppa64/}.tar.xz
+
+ cd "${WORKDIR}" || die
+ unpack binutils-${PATCH_BINUTILS_VER}-patches-${PATCH_VER}.tar.xz
+
+ # _p patch versions are Gentoo specific tarballs ...
+ local dir=${P%_p?}
+ dir=${dir/-hppa64/}
+
+ S=${WORKDIR}/${dir}
+ fi
+
+ cd "${WORKDIR}" || die
+ mkdir -p "${MY_BUILDDIR}" || die
+}
+
+src_prepare() {
+ local patchsetname
+ if [[ ${PV} == 9999 ]] ; then
+ patchsetname="from git master"
+ elif [[ ${PV} == *9999 ]] ; then
+ patchsetname="from git branch ${EGIT_BRANCH}"
+ else
+ patchsetname="${PATCH_BINUTILS_VER}-${PATCH_VER}"
+ fi
+
+ if [[ -n ${PATCH_VER} ]] || [[ ${PV} == *9999 ]] ; then
+ if ! use vanilla; then
+ einfo "Applying binutils patchset ${patchsetname}"
+ eapply "${WORKDIR}/patches"
+ einfo "Done."
+
+ # This is applied conditionally for now just out of caution.
+ # It should be okay on non-prefix systems though. See bug #892549.
+ if [[ ${PN} != binutils-hppa64 ]] && { is_cross || use prefix; } ; then
+ eapply "${FILESDIR}"/binutils-2.43-linker-search-path.patch \
+ "${FILESDIR}"/binutils-2.43-linker-prefix.patch
+ fi
+ fi
+ fi
+
+ # Make sure our explicit libdir paths don't get clobbered, bug #562460
+ sed -i \
+ -e 's:@bfdlibdir@:@libdir@:g' \
+ -e 's:@bfdincludedir@:@includedir@:g' \
+ {bfd,opcodes}/Makefile.in || die
+
+ # Apply things from PATCHES and user dirs
+ default
+
+ # Run misc portage update scripts
+ gnuconfig_update
+ elibtoolize --portage --no-uclibc
+}
+
+toolchain-binutils_bugurl() {
+ printf "https://bugs.gentoo.org/"
+}
+toolchain-binutils_pkgversion() {
+ printf "Gentoo ${PV}"
+ [[ -n ${PATCH_VER} ]] && printf " p${PATCH_VER}"
+}
+
+src_configure() {
+ # See https://www.gnu.org/software/make/manual/html_node/Parallel-Output.html
+ # Avoid really confusing logs from subconfigure spam, makes logs far
+ # more legible.
+ MAKEOPTS="--output-sync=line ${MAKEOPTS}"
+
+ # Setup some paths
+ LIBPATH=/usr/$(get_libdir)/binutils/${CTARGET}/${PV}
+ INCPATH=${LIBPATH}/include
+ DATAPATH=/usr/share/binutils-data/${CTARGET}/${PV}
+ if is_cross ; then
+ TOOLPATH=/usr/${CHOST}/${CTARGET}
+ else
+ TOOLPATH=/usr/${CTARGET}
+ fi
+ BINPATH=${TOOLPATH}/binutils-bin/${PV}
+
+ # Make sure we filter $LINGUAS so that only ones that
+ # actually work make it through, bug #42033
+ strip-linguas -u */po
+
+ # Keep things sane
+ strip-flags
+ use cet && filter-flags -mindirect-branch -mindirect-branch=*
+ use elibc_musl && append-ldflags -Wl,-z,stack-size=2097152
+
+ local x
+ echo
+ for x in CATEGORY CBUILD CHOST CTARGET CFLAGS LDFLAGS ; do
+ einfo "$(printf '%10s' ${x}:) ${!x}"
+ done
+ echo
+
+ cd "${MY_BUILDDIR}" || die
+ local myconf=()
+
+ if use plugins ; then
+ myconf+=( --enable-plugins )
+ fi
+
+ if use nls ; then
+ myconf+=( --without-included-gettext )
+ else
+ myconf+=( --disable-nls )
+ fi
+
+ myconf+=( --with-system-zlib )
+
+ # For bi-arch systems, enable a 64bit bfd. This matches the bi-arch
+ # logic in toolchain.eclass. bug #446946
+ #
+ # We used to do it for everyone, but it's slow on 32bit arches. bug #438522
+ case $(tc-arch) in
+ ppc|sparc|x86) myconf+=( --enable-64-bit-bfd ) ;;
+ esac
+
+ use multitarget && myconf+=( --enable-targets=all --enable-64-bit-bfd )
+
+ [[ -n ${CBUILD} ]] && myconf+=( --build=${CBUILD} )
+
+ is_cross && myconf+=(
+ --with-sysroot="${EPREFIX}"/usr/${CTARGET}
+ --enable-poison-system-directories
+ )
+
+ myconf+=( --enable-secureplt )
+
+ # mips can't do hash-style=gnu ...
+ if [[ $(tc-arch) != mips ]] ; then
+ myconf+=( --enable-default-hash-style=gnu )
+ fi
+
+ myconf+=(
+ --prefix="${EPREFIX}"/usr
+ --host=${CHOST}
+ --target=${CTARGET}
+ --datadir="${EPREFIX}"${DATAPATH}
+ --datarootdir="${EPREFIX}"${DATAPATH}
+ --infodir="${EPREFIX}"${DATAPATH}/info
+ --mandir="${EPREFIX}"${DATAPATH}/man
+ --bindir="${EPREFIX}"${BINPATH}
+ --libdir="${EPREFIX}"${LIBPATH}
+ --libexecdir="${EPREFIX}"${LIBPATH}
+ --includedir="${EPREFIX}"${INCPATH}
+ # portage's econf() does not detect presence of --d-d-t
+ # because it greps only top-level ./configure. But not
+ # libiberty's or bfd's configure.
+ --disable-dependency-tracking
+ --disable-silent-rules
+ --enable-obsolete
+ --enable-shared
+ --enable-threads
+ --enable-relro
+ --enable-install-libiberty
+ --enable-textrel-check=$(usex hardened error warning)
+ # Things to think about
+ #--enable-deterministic-archives
+ --enable-new-dtags
+ --disable-jansson
+ --disable-werror
+ --with-bugurl="$(toolchain-binutils_bugurl)"
+ --with-pkgversion="$(toolchain-binutils_pkgversion)"
+ $(use_enable static-libs static)
+ $(use_with xxhash)
+ $(use_with zstd)
+
+ # Disable modules that are in a combined binutils/gdb tree, bug #490566
+ --disable-{gdb,gdbserver,libbacktrace,libdecnumber,readline,sim}
+ # Strip out broken static link flags: https://gcc.gnu.org/PR56750
+ --without-stage1-ldflags
+ # Change SONAME to avoid conflict across {native,cross}/binutils, binutils-libs. bug #666100
+ --with-extra-soversion-suffix=gentoo-${CATEGORY}-${PN}-$(usex multitarget mt st)
+
+ $(use_with debuginfod)
+
+ # Avoid automagic dev-libs/msgpack dep, bug #865875
+ --without-msgpack
+
+ # Allow user to opt into CET for host libraries.
+ # Ideally we would like automagic-or-disabled here.
+ # But the check does not quite work on i686: bug #760926.
+ $(use_enable cet)
+
+ # We can enable this by default in future, but it's brand new
+ # in 2.39 with several bugs:
+ # - Doesn't build on musl (https://sourceware.org/bugzilla/show_bug.cgi?id=29477)
+ # - No man pages (https://sourceware.org/bugzilla/show_bug.cgi?id=29521)
+ # - Broken at runtime without Java (https://sourceware.org/bugzilla/show_bug.cgi?id=29479)
+ # - binutils-config (and this ebuild?) needs adaptation first (https://bugs.gentoo.org/865113)
+ $(use_enable gprofng)
+
+ # Enables colored disassembly by default (equivalent to passing
+ # --disassembler-color=terminal to all objdump invocations).
+ --enable-colored-disassembly
+ )
+
+ case ${CTARGET} in
+ x86_64-*|aarch64*|arm64*|i[3456]*)
+ # These hardening options are available from 2.39+ but
+ # they unconditionally enable the behaviour even on arches
+ # where e.g. execstacks can't be avoided.
+ # See https://sourceware.org/bugzilla/show_bug.cgi?id=29592.
+ #
+ # TODO: Get the logic for this fixed upstream so it doesn't
+ # create impossible broken combinations on some arches, like mips.
+ #
+ # TODO: Get the logic for this fixed upstream so --disable-* works
+ # as expected.
+ myconf+=(
+ --enable-warn-execstack=yes
+ --enable-warn-rwx-segments=yes
+ )
+
+ if use hardened ; then
+ myconf+=(
+ # TODO: breaks glibc test suite
+ #--enable-error-execstack=yes
+ #--enable-error-rwx-segments=yes
+ --enable-default-execstack=no
+ )
+ fi
+ ;;
+ *)
+ ;;
+ esac
+
+ if use elibc_musl ; then
+ # Override our earlier setting for musl, as textrels don't
+ # work there at all. See bug #707660.
+ myconf+=(
+ --enable-textrel-check=error
+ )
+ fi
+
+ if use test || { use pgo && tc-is-lto ; } ; then
+ # -Wa,* needs to be consistent everywhere or lto-wrapper will complain
+ filter-flags '-Wa,*'
+ fi
+
+ if ! is_cross ; then
+ # No LTO for HPPA64 right now as we don't build kgcc64 with LTO support.
+ myconf+=( $(use_enable pgo pgo-build) )
+
+ if use pgo ; then
+ # We let configure handle it for us because it has to run
+ # the testsuite later on for profiling, and LTO isn't compatible
+ # with the testsuite.
+ filter-lto
+
+ export BUILD_CFLAGS="${CFLAGS}"
+ fi
+ fi
+
+ ECONF_SOURCE="${S}" econf "${myconf[@]}"
+
+ # Prevent makeinfo from running if doc is unset.
+ if ! use doc ; then
+ sed -i \
+ -e '/^MAKEINFO/s:=.*:= true:' \
+ Makefile || die
+ fi
+}
+
+src_compile() {
+ cd "${MY_BUILDDIR}" || die
+
+ # see Note [tooldir hack for ldscripts]
+ # see linker prefix patch
+ emake \
+ tooldir="${EPREFIX}${TOOLPATH}" \
+ gentoo_prefix=$(usex prefix-guest "${EPREFIX}"/usr /usr) \
+ all
+
+ # only build info pages if the user wants them
+ if use doc ; then
+ emake info
+ fi
+
+ # we nuke the manpages when we're left with junk
+ # (like when we bootstrap, no perl -> no manpages)
+ find . -name '*.1' -a -size 0 -delete
+}
+
+src_test() {
+ cd "${MY_BUILDDIR}" || die
+
+ (
+ # Tests don't expect LTO
+ filter-lto
+
+ # lto-wrapper warnings which confuse tests
+ filter-flags '-Wa,*'
+
+ # bug #637066
+ filter-flags -Wall -Wreturn-type
+
+ emake -k check \
+ CFLAGS_FOR_TARGET="${CFLAGS_FOR_TARGET:-${CFLAGS}}" \
+ CXXFLAGS_FOR_TARGET="${CXXFLAGS_FOR_TARGET:-${CXXFLAGS}}" \
+ LDFLAGS_FOR_TARGET="${LDFLAGS_FOR_TARGET:-${LDFLAGS}}" \
+ CFLAGS="${CFLAGS}" \
+ CXXFLAGS="${CXXFLAGS}" \
+ LDFLAGS="${LDFLAGS}"
+ )
+}
+
+src_install() {
+ local x d
+
+ cd "${MY_BUILDDIR}" || die
+
+ # see Note [tooldir hack for ldscripts]
+ emake DESTDIR="${D}" tooldir="${EPREFIX}${LIBPATH}" install
+ rm -rf "${ED}"/${LIBPATH}/bin || die
+ use static-libs || find "${ED}" -name '*.la' -delete
+
+ # Newer versions of binutils get fancy with ${LIBPATH}, bug #171905
+ cd "${ED}"/${LIBPATH} || die
+ for d in ../* ; do
+ [[ ${d} == ../${PV} ]] && continue
+ mv ${d}/* . || die
+ rmdir ${d} || die
+ done
+
+ # Now we collect everything intp the proper SLOT-ed dirs
+ # When something is built to cross-compile, it installs into
+ # /usr/$CHOST/ by default ... we have to 'fix' that :)
+ if is_cross ; then
+ cd "${ED}"/${BINPATH} || die
+ for x in * ; do
+ mv ${x} ${x/${CTARGET}-} || die
+ done
+
+ if [[ -d ${ED}/usr/${CHOST}/${CTARGET} ]] ; then
+ mv "${ED}"/usr/${CHOST}/${CTARGET}/include "${ED}"/${INCPATH}
+ mv "${ED}"/usr/${CHOST}/${CTARGET}/lib/* "${ED}"/${LIBPATH}/
+ rm -r "${ED}"/usr/${CHOST}/{include,lib}
+ fi
+ fi
+
+ insinto ${INCPATH}
+ local libiberty_headers=(
+ # Not all the libiberty headers. See libiberty/Makefile.in:install_to_libdir.
+ demangle.h
+ dyn-string.h
+ fibheap.h
+ hashtab.h
+ libiberty.h
+ objalloc.h
+ splay-tree.h
+ )
+ doins "${libiberty_headers[@]/#/${S}/include/}"
+ if [[ -d ${ED}/${LIBPATH}/lib ]] ; then
+ mv "${ED}"/${LIBPATH}/lib/* "${ED}"/${LIBPATH}/ || die
+ rm -r "${ED}"/${LIBPATH}/lib || die
+ fi
+
+ # Generate an env.d entry for this binutils
+ insinto /etc/env.d/binutils
+ cat <<-EOF > "${T}"/env.d
+ TARGET="${CTARGET}"
+ VER="${PV}"
+ LIBPATH="${EPREFIX}${LIBPATH}"
+ EOF
+ newins "${T}"/env.d ${CTARGET}-${PV}
+
+ # Handle documentation
+ if ! is_cross ; then
+ cd "${S}" || die
+ dodoc README
+
+ docinto bfd
+ dodoc bfd/ChangeLog* bfd/README bfd/PORTING bfd/TODO
+
+ docinto binutils
+ dodoc binutils/ChangeLog binutils/NEWS binutils/README
+
+ docinto gas
+ dodoc gas/ChangeLog* gas/CONTRIBUTORS gas/NEWS gas/README*
+
+ docinto gprof
+ dodoc gprof/ChangeLog* gprof/TEST gprof/TODO gprof/bbconv.pl
+
+ docinto ld
+ dodoc ld/ChangeLog* ld/README ld/NEWS ld/TODO
+
+ docinto libiberty
+ dodoc libiberty/ChangeLog* libiberty/README
+
+ docinto opcodes
+ dodoc opcodes/ChangeLog*
+ fi
+
+ # Remove shared info pages
+ rm -f "${ED}"/${DATAPATH}/info/{dir,configure.info,standards.info}
+
+ docompress "${DATAPATH}"/{info,man}
+
+ # Trim all empty dirs
+ find "${ED}" -depth -type d -exec rmdir {} + 2>/dev/null
+
+ # the hppa64 hack; this should go into 9999 as a PN-conditional
+ # tweak the default fake list a little bit
+ cd "${D}"/etc/env.d/binutils
+ sed -i '/FAKE_TARGETS=/s:"$: hppa64-linux":' ${CTARGET}-${PV} || die
+}
+
+pkg_postinst() {
+ # Make sure this ${CTARGET} has a binutils version selected
+ [[ -e ${EROOT}/etc/env.d/binutils/config-${CTARGET} ]] && return 0
+ binutils-config ${CTARGET}-${PV} || eerror binutils-config returned an error
+}
+
+pkg_postrm() {
+ local current_profile=$(binutils-config -c ${CTARGET})
+
+ # If no other versions exist, then uninstall for this
+ # target ... otherwise, switch to the newest version
+ # Note: only do this if this version is unmerged. We
+ # rerun binutils-config if this is a remerge, as
+ # we want the mtimes on the symlinks updated (if
+ # it is the same as the current selected profile)
+ if [[ ! -e ${EPREFIX}${BINPATH}/ld ]] && [[ ${current_profile} == ${CTARGET}-${PV} ]] ; then
+ local choice=$(binutils-config -l | grep ${CTARGET} | awk '{print $2}')
+ choice=${choice//$'\n'/ }
+ choice=${choice/* }
+ if [[ -z ${choice} ]] ; then
+ binutils-config -u ${CTARGET} || eerror binutils-config returned an error
+ else
+ binutils-config ${choice} || eerror binutils-config returned an error
+ fi
+ elif [[ $(CHOST=${CTARGET} binutils-config -c) == ${CTARGET}-${PV} ]] ; then
+ binutils-config ${CTARGET}-${PV} || eerror binutils-config returned an error
+ fi
+}
+
+# Note [slotting support]
+# -----------------------
+# Gentoo's layout for binutils files is non-standard as Gentoo
+# supports slotted installation for binutils. Many tools
+# still expect binutils to reside in known locations.
+# binutils-config package restores symlinks into known locations,
+# like:
+# /usr/bin/${CTARGET}-<tool>
+# /usr/bin/${CHOST}/${CTARGET}/lib/ldscrips
+# /usr/include/
+#
+# Note [tooldir hack for ldscripts]
+# ---------------------------------
+# Build system does not allow ./configure to tweak every location
+# we need for slotting binutils hence all the shuffling in
+# src_install(). This note is about SCRIPTDIR define handling.
+#
+# SCRIPTDIR defines 'ldscripts/' directory location. SCRIPTDIR value
+# is set at build-time in ld/Makefile.am as: 'scriptdir = $(tooldir)/lib'
+# and hardcoded as -DSCRIPTDIR='"$(scriptdir)"' at compile time.
+# Thus we can't just move files around after compilation finished.
+#
+# Our goal is the following:
+# - at build-time set scriptdir to point to symlinked location:
+# ${TOOLPATH}: /usr/${CHOST} (or /usr/${CHOST}/${CTARGET} for cross-case)
+# - at install-time set scriptdir to point to slotted location:
+# ${LIBPATH}: /usr/$(get_libdir)/binutils/${CTARGET}/${PV}