repo/gentoo:master commit in: eclass/

commit:     d635b72782e6319b09f5f70c2443eda6c480b840
Author:     Andreas Sturmlechner <asturm <AT> gentoo <DOT> org>
AuthorDate: Sat Aug  8 21:04:41 2026 +0000
Commit:     Andreas Sturmlechner <asturm <AT> gentoo <DOT> org>
CommitDate: Sat Aug  8 21:05:14 2026 +0000
URL:        https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=d635b727

qt5-build.eclass: Remove last-rited eclass

Signed-off-by: Andreas Sturmlechner <asturm <AT> gentoo.org>

 eclass/qt5-build.eclass | 1031 -----------------------------------------------
 1 file changed, 1031 deletions(-)

diff --git a/eclass/qt5-build.eclass b/eclass/qt5-build.eclass
deleted file mode 100644
index 31a223557449..000000000000
--- a/eclass/qt5-build.eclass
+++ /dev/null
@@ -1,1031 +0,0 @@
-# Copyright 1999-2026 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-# @ECLASS: qt5-build.eclass
-# @MAINTAINER:
-# [email protected]
-# @AUTHOR:
-# Davide Pesavento <[email protected]>
-# @SUPPORTED_EAPIS: 8
-# @BLURB: Eclass for Qt5 split ebuilds.
-# @DEAD
-# @DESCRIPTION:
-# This eclass contains various functions that are used when building Qt5.
-
-case ${EAPI} in
-	8) ;;
-	*) die "${ECLASS}: EAPI ${EAPI:-0} not supported" ;;
-esac
-
-if [[ -z ${_QT5_BUILD_ECLASS} ]]; then
-_QT5_BUILD_ECLASS=1
-
-[[ ${CATEGORY} != dev-qt ]] &&
-	die "${ECLASS} is only to be used for building Qt 5"
-
-# @ECLASS_VARIABLE: QT5_BUILD_TYPE
-# @DESCRIPTION:
-# Default value is "release".
-# If PV matches "*9999*", this is automatically set to "live".
-QT5_BUILD_TYPE=release
-if [[ ${PV} == *9999* ]]; then
-	QT5_BUILD_TYPE=live
-fi
-readonly QT5_BUILD_TYPE
-
-# @ECLASS_VARIABLE: QT5_KDEPATCHSET_REV
-# @DEFAULT_UNSET
-# @PRE_INHERIT
-# @DESCRIPTION:
-# Downstream generated patchset revision pulled from KDE's Qt5PatchCollection,
-# with the patchset having been generated in the following way from upstream's
-# qt module git repository:
-# @CODE
-# git format-patch v${PV}-lts-lgpl..origin/gentoo-kde/${PV} \
-#	-o ${QT5_MODULE}-${PV}-gentoo-kde-${QT5_KDEPATCHSET_REV}
-# @CODE
-# Used for SRC_URI and applied in src_prepare.
-# Must be set before inheriting the eclass.
-
-# @ECLASS_VARIABLE: QT5_MODULE
-# @PRE_INHERIT
-# @DESCRIPTION:
-# The upstream name of the module this package belongs to. Used for
-# SRC_URI and EGIT_REPO_URI. Must be set before inheriting the eclass.
-: "${QT5_MODULE:=${PN}}"
-
-# @ECLASS_VARIABLE: QT5_PV
-# @DESCRIPTION:
-# 3-component version for use in dependency declarations on other dev-qt/ pkgs.
-QT5_PV=$(ver_cut 1-3)
-readonly QT5_PV
-
-# @ECLASS_VARIABLE: _QT5_P
-# @INTERNAL
-# @DESCRIPTION:
-# The upstream package name of the module this package belongs to.
-# Used for SRC_URI and S.
-
-# @ECLASS_VARIABLE: _QT5_GENTOOPATCHSET_REV
-# @DEFAULT_UNSET
-# @INTERNAL
-# @DESCRIPTION:
-# Gentoo downstream patchset version applied over qtbase. Used for SRC_URI and
-# applied in src_prepare.
-
-# @ECLASS_VARIABLE: QT5_TARGET_SUBDIRS
-# @DEFAULT_UNSET
-# @DESCRIPTION:
-# Array variable containing the source directories that should be built.
-# All paths must be relative to ${S}.
-
-# @ECLASS_VARIABLE: QT5_GENTOO_CONFIG
-# @DEFAULT_UNSET
-# @DESCRIPTION:
-# Array of <useflag:feature:macro> triplets that are evaluated in src_install
-# to generate the per-package list of enabled QT_CONFIG features and macro
-# definitions, which are then merged together with all other Qt5 packages
-# installed on the system to obtain the global qconfig.{h,pri} files.
-
-# @ECLASS_VARIABLE: QT5_GENTOO_PRIVATE_CONFIG
-# @DEFAULT_UNSET
-# @DESCRIPTION:
-# Array of <useflag:feature> pairs that are evaluated in src_install
-# to generate the per-package list of enabled QT.global_private features,
-# which are then merged together with all other Qt5 packages installed on the
-# system to obtain the global qmodule.pri file.
-
-# @ECLASS_VARIABLE: VIRTUALX_REQUIRED
-# @PRE_INHERIT
-# @DESCRIPTION:
-# For proper description see virtualx.eclass man page.
-# Here we redefine default value to be manual, if your package needs virtualx
-# for tests you should proceed with setting VIRTUALX_REQUIRED=test.
-: "${VIRTUALX_REQUIRED:=manual}"
-
-inherit estack flag-o-matic toolchain-funcs virtualx
-
-if [[ ${PN} != qtwebengine ]]; then
-	case ${PV} in
-		*9999)
-			inherit kde.org # kde/5.15 branch
-			;;
-		5.15.??*)
-			# official stable release
-			_QT5_P=${QT5_MODULE}-everywhere-opensource-src-${PV}
-			HOMEPAGE="https://www.qt.io/"
-			case ${PV} in
-				5.15.17)
-					SRC_URI="https://download.qt.io/official_releases/qt/${PV%.*}/${PV}/submodules/${_QT5_P}.tar.xz"
-					;;
-				*)
-					SRC_URI="https://download.qt.io/archive/qt/${PV%.*}/${PV}/submodules/${_QT5_P}.tar.xz"
-					;;
-			esac
-			# KDE Qt5PatchCollection on top of tag v${PV}-lts-lgpl
-			if [[ -n ${QT5_KDEPATCHSET_REV} ]]; then
-				HOMEPAGE+=" https://invent.kde.org/qt/qt/${QT5_MODULE} https://community.kde.org/Qt5PatchCollection"
-				SRC_URI+=" https://dev.gentoo.org/~asturm/distfiles/${QT5_MODULE}-${PV}-gentoo-kde-${QT5_KDEPATCHSET_REV}.tar.xz"
-			fi
-			S="${WORKDIR}"/${_QT5_P/opensource-}
-			;;
-	esac
-fi
-
-if [[ ${QT5_MODULE} == qtbase ]]; then
-	_QT5_GENTOOPATCHSET_REV=6
-	SRC_URI+=" https://dev.gentoo.org/~asturm/distfiles/qtbase-5.15-gentoo-patchset-${_QT5_GENTOOPATCHSET_REV}.tar.xz"
-fi
-
-# @ECLASS_VARIABLE: QT5_BUILD_DIR
-# @OUTPUT_VARIABLE
-# @DESCRIPTION:
-# Build directory for out-of-source builds.
-: "${QT5_BUILD_DIR:=${S}_build}"
-
-LICENSE="|| ( GPL-2 GPL-3 LGPL-3 ) FDL-1.3"
-
-case ${PN} in
-	assistant|linguist|qdbus|qdbusviewer|pixeltool)
-		SLOT=0 ;;
-	linguist-tools|qdoc|qtdiag|qtgraphicaleffects|qtimageformats| \
-	qtpaths|qtplugininfo|qtquickcontrols|qtquicktimeline| \
-	qttranslations|qtwaylandscanner|qtxmlpatterns)
-		SLOT=5 ;;
-	*)
-		SLOT=5/$(ver_cut 1-2) ;;
-esac
-
-IUSE="debug test"
-
-if [[ ${QT5_BUILD_TYPE} == release ]]; then
-	RESTRICT="test" # bug 457182
-else
-	RESTRICT="!test? ( test )"
-fi
-
-BDEPEND="
-	dev-lang/perl
-	virtual/pkgconfig
-"
-if [[ ${PN} != qttest ]]; then
-	DEPEND+=" test? ( =dev-qt/qttest-${QT5_PV}* )"
-fi
-
-######  Phase functions  ######
-
-# @FUNCTION: qt5-build_src_prepare
-# @DESCRIPTION:
-# Prepares the environment and patches the sources if necessary.
-qt5-build_src_prepare() {
-	qt5_prepare_env
-
-	# Workaround for bug #915203
-	# Upstream: https://bugreports.qt.io/browse/QTBUG-111514
-	if [[ ${PN} != qtcore ]]; then
-		append-ldflags $(test-flags-CCLD -Wl,--undefined-version)
-	fi
-
-	# many bugs, no one to fix
-	filter-lto
-
-	if [[ ${QT5_BUILD_TYPE} == live ]] || [[ -n ${KDE_ORG_COMMIT} ]]; then
-		if [[ -n ${KDE_ORG_COMMIT} ]]; then
-			einfo "Preparing KDE Qt5PatchCollection snapshot at ${KDE_ORG_COMMIT}"
-			mkdir -p .git || die # need to fake a git repository for configure
-		fi
-	fi
-
-	if [[ ${QT5_MODULE} == qtbase ]]; then
-		qt5_symlink_tools_to_build_dir
-
-		# Avoid unnecessary qmake recompilations
-		sed -i -e "/Creating qmake/i if [ '!' -e \"\$outpath/bin/qmake\" ]; then" \
-			-e '/echo "Done."/a fi' configure || die "sed failed (skip qmake bootstrap)"
-
-		# Respect CXX in bsymbolic_functions, fvisibility, precomp, and a few other tests
-		sed -i -e "/^QMAKE_CONF_COMPILER=/ s:=.*:=\"$(tc-getCXX)\":" \
-			configure || die "sed failed (QMAKE_CONF_COMPILER)"
-
-		# Respect build variables in configure tests (bug #639494)
-		sed -i -e "s|\"\$outpath/bin/qmake\" \"\$relpathMangled\" -- \"\$@\"|& $(qt5_qmake_args) |" configure || die
-	fi
-
-	[[ -n ${QT5_KDEPATCHSET_REV} ]] && eapply "${WORKDIR}/${QT5_MODULE}-${PV}-gentoo-kde-${QT5_KDEPATCHSET_REV}"
-
-	if [[ ${QT5_MODULE} == qtbase ]]; then
-		[[ -n ${_QT5_GENTOOPATCHSET_REV} ]] && eapply "${WORKDIR}/qtbase-5.15-gentoo-patchset-${_QT5_GENTOOPATCHSET_REV}"
-
-		# Respect CC, CXX, *FLAGS, MAKEOPTS and EXTRA_EMAKE when bootstrapping qmake
-		sed -i -e "/outpath\/qmake\".*\"*\$MAKE\"*)/ s|)| \
-			${MAKEOPTS} ${EXTRA_EMAKE} 'CC=$(tc-getCC)' 'CXX=$(tc-getCXX)' \
-			'QMAKE_CFLAGS=${CFLAGS}' 'QMAKE_CXXFLAGS=${CXXFLAGS}' 'QMAKE_LFLAGS=${LDFLAGS}'&|" \
-			-e 's/\(setBootstrapVariable\s\+\|EXTRA_C\(XX\)\?FLAGS=.*\)QMAKE_C\(XX\)\?FLAGS_\(DEBUG\|RELEASE\).*/:/' \
-			configure || die "sed failed (respect env for qmake build)"
-		sed -i -e '/^CPPFLAGS\s*=/ s/-g //' \
-			qmake/Makefile.unix || die "sed failed (CPPFLAGS for qmake build)"
-	fi
-
-	default
-}
-
-# @FUNCTION: qt5-build_src_configure
-# @DESCRIPTION:
-# Runs qmake in the target directories. For packages
-# in qtbase, ./configure is also run before qmake.
-qt5-build_src_configure() {
-	if [[ ${QT5_MODULE} == qtbase ]]; then
-		qt5_base_configure
-	fi
-	if [[ ${QT5_MODULE} == qttools ]]; then
-		qt5_tools_configure
-	fi
-
-	qt5_foreach_target_subdir qt5_qmake
-}
-
-# @FUNCTION: qt5-build_src_compile
-# @DESCRIPTION:
-# Runs emake in the target directories.
-qt5-build_src_compile() {
-	qt5_foreach_target_subdir emake
-}
-
-# @FUNCTION: qt5-build_src_test
-# @DESCRIPTION:
-# Runs tests in the target directories.
-qt5-build_src_test() {
-	# disable broken cmake tests (bug 474004)
-	local myqmakeargs=("${myqmakeargs[@]}" -after SUBDIRS-=cmake SUBDIRS-=installed_cmake)
-
-	qt5_foreach_target_subdir qt5_qmake
-	qt5_foreach_target_subdir emake
-
-	# create a custom testrunner script that correctly sets
-	# LD_LIBRARY_PATH before executing the given test
-	local testrunner=${QT5_BUILD_DIR}/gentoo-testrunner
-	cat > "${testrunner}" <<-_EOF_ || die
-	#!/bin/sh
-	export LD_LIBRARY_PATH="${QT5_BUILD_DIR}/lib:${QT5_LIBDIR}"
-	"\$@"
-	_EOF_
-	chmod +x "${testrunner}"
-
-	set -- qt5_foreach_target_subdir emake TESTRUNNER="'${testrunner}'" check
-	if [[ ${VIRTUALX_REQUIRED} == test ]]; then
-		virtx "$@"
-	else
-		"$@"
-	fi
-}
-
-# @FUNCTION: qt5-build_src_install
-# @DESCRIPTION:
-# Runs emake install in the target directories.
-qt5-build_src_install() {
-	qt5_foreach_target_subdir emake INSTALL_ROOT="${D}" install
-
-	if [[ ${PN} == qtcore ]]; then
-		pushd "${QT5_BUILD_DIR}" >/dev/null || die
-
-		set -- emake INSTALL_ROOT="${D}" \
-			sub-qmake-qmake-aux-pro-install_subtargets \
-			install_{syncqt,mkspecs}
-
-		einfo "Running $*"
-		"$@"
-
-		popd >/dev/null || die
-
-		# install an empty Gentoo/gentoo-qconfig.h in ${D}
-		# so that it's placed under package manager control
-		> "${T}"/gentoo-qconfig.h
-		(
-			insinto "${QT5_HEADERDIR#"${EPREFIX}"}"/Gentoo
-			doins "${T}"/gentoo-qconfig.h
-		)
-
-		# include gentoo-qconfig.h at the beginning of QtCore/qconfig.h
-		sed -i -e '1i #include <Gentoo/gentoo-qconfig.h>\n' \
-			"${D}${QT5_HEADERDIR}"/QtCore/qconfig.h \
-			|| die "sed failed (qconfig.h)"
-	fi
-
-	qt5_install_module_config
-
-	# prune libtool files
-	find "${D}" -name '*.la' -type f -delete || die
-}
-
-# @FUNCTION: qt5-build_pkg_postinst
-# @DESCRIPTION:
-# Regenerate configuration after installation or upgrade/downgrade.
-qt5-build_pkg_postinst() {
-	qt5_regenerate_global_configs
-}
-
-# @FUNCTION: qt5-build_pkg_postrm
-# @DESCRIPTION:
-# Regenerate configuration when a module is completely removed.
-qt5-build_pkg_postrm() {
-	if [[ -z ${REPLACED_BY_VERSION} && ${PN} != qtcore ]]; then
-		qt5_regenerate_global_configs
-	fi
-}
-
-
-######  Public helpers  ######
-
-# @FUNCTION: qt5_configure_oos_quirk
-# @USAGE: <file> or <file> <path>
-# @DESCRIPTION:
-# Quirk for out-of-source builds. Runs qmake in root directory, copies
-# generated pri <file> from source <path> to build dir <path>.
-# If no <path> is given, <file> is copied to ${QT5_BUILD_DIR}.
-qt5_configure_oos_quirk() {
-	if [[ "$#" == 2 ]]; then
-		local source="${2}/${1}"
-		local dest="${QT5_BUILD_DIR}/${2}"
-	elif [[ "$#" == 1 ]]; then
-		local source="${1}"
-		local dest="${QT5_BUILD_DIR}"
-	else
-		die "${FUNCNAME[0]} must be passed either one or two arguments"
-	fi
-
-	mkdir -p "${dest}" || die
-	qt5_qmake "${QT5_BUILD_DIR}"
-	cp "${source}" "${dest}" || die
-}
-
-# @FUNCTION: qt5_syncqt_version
-# @DESCRIPTION:
-# Wrapper for Qt5 syncqt.pl to sync header files for ${PV} (required to run if
-# headers are added/removed by patching)
-qt5_syncqt_version() {
-	if [[ ${PV} == *9999* ]]; then
-		return
-	fi
-
-	local syncqt
-	if [[ ${PN} == qtcore ]]; then
-		syncqt=bin/syncqt.pl
-	else
-		syncqt=${QT5_BINDIR}/syncqt.pl
-	fi
-
-	perl ${syncqt} -version ${PV} || die
-}
-
-# @FUNCTION: qt5_symlink_binary_to_path
-# @USAGE: <target binary name> [suffix]
-# @DESCRIPTION:
-# Symlink a given binary from QT5_BINDIR to QT5_PREFIX/bin, with optional suffix
-qt5_symlink_binary_to_path() {
-	[[ $# -ge 1 ]] || die "${FUNCNAME}() requires at least one argument"
-
-	dosym -r "${QT5_BINDIR}"/${1} /usr/bin/${1}${2}
-}
-
-# @FUNCTION: qt_use
-# @USAGE: <flag> [feature] [enableval]
-# @DESCRIPTION:
-# <flag> is the name of a flag in IUSE.
-#
-# Outputs "-${enableval}-${feature}" if <flag> is enabled, "-no-${feature}"
-# otherwise. If [feature] is not specified, <flag> is used in its place.
-# If [enableval] is not specified, the "-${enableval}" prefix is omitted.
-qt_use() {
-	[[ $# -ge 1 ]] || die "${FUNCNAME}() requires at least one argument"
-
-	usex "$1" "${3:+-$3}-${2:-$1}" "-no-${2:-$1}"
-}
-
-# @FUNCTION: qt_use_compile_test
-# @USAGE: <flag> [config]
-# @DESCRIPTION:
-# <flag> is the name of a flag in IUSE.
-# [config] is the argument of qtCompileTest, defaults to <flag>.
-#
-# This function is useful to disable optional dependencies that are checked
-# at qmake-time using the qtCompileTest() function. If <flag> is disabled,
-# the compile test is skipped and the dependency is assumed to be unavailable,
-# i.e. the corresponding feature will be disabled. Note that all invocations
-# of this function must happen before calling qt5-build_src_configure.
-qt_use_compile_test() {
-	[[ $# -ge 1 ]] || die "${FUNCNAME}() requires at least one argument"
-
-	if ! use "$1"; then
-		mkdir -p "${QT5_BUILD_DIR}" || die
-		echo "CONFIG += done_config_${2:-$1}" >> "${QT5_BUILD_DIR}"/.qmake.cache || die
-	fi
-}
-
-# @FUNCTION: qt_use_disable_config
-# @USAGE: <flag> <config> <files...>
-# @DESCRIPTION:
-# <flag> is the name of a flag in IUSE.
-# <config> is the (lowercase) name of a Qt5 config entry.
-# <files...> is a list of one or more qmake project files.
-#
-# This function patches <files> to treat <config> as disabled
-# when <flag> is disabled, otherwise it does nothing.
-# This can be useful to avoid an automagic dependency when the config entry
-# is enabled on the system but the corresponding USE flag is disabled.
-qt_use_disable_config() {
-	[[ $# -ge 3 ]] || die "${FUNCNAME}() requires at least three arguments"
-
-	local flag=$1
-	local config=$2
-	shift 2
-
-	if ! use "${flag}"; then
-		echo "$@" | xargs sed -i -e "s/qtConfig(${config})/false/g" || die
-	fi
-}
-
-# @FUNCTION: qt_use_disable_mod
-# @USAGE: <flag> <module> <files...>
-# @DESCRIPTION:
-# <flag> is the name of a flag in IUSE.
-# <module> is the (lowercase) name of a Qt5 module.
-# <files...> is a list of one or more qmake project files.
-#
-# This function patches <files> to treat <module> as not installed
-# when <flag> is disabled, otherwise it does nothing.
-# This can be useful to avoid an automagic dependency when the module
-# is present on the system but the corresponding USE flag is disabled.
-qt_use_disable_mod() {
-	[[ $# -ge 3 ]] || die "${FUNCNAME}() requires at least three arguments"
-
-	local flag=$1
-	local module=$2
-	shift 2
-
-	if ! use "${flag}"; then
-		echo "$@" | xargs sed -i -e "s/qtHaveModule(${module})/false/g" || die
-	fi
-}
-
-
-######  Internal functions  ######
-
-# @FUNCTION: qt5_prepare_env
-# @INTERNAL
-# @DESCRIPTION:
-# Prepares the environment for building Qt.
-qt5_prepare_env() {
-	# setup installation directories
-	# note: keep paths in sync with qmake-utils.eclass
-	QT5_PREFIX=${EPREFIX}/usr
-	QT5_HEADERDIR=${QT5_PREFIX}/include/qt5
-	QT5_LIBDIR=${QT5_PREFIX}/$(get_libdir)
-	QT5_ARCHDATADIR=${QT5_PREFIX}/$(get_libdir)/qt5
-	QT5_BINDIR=${QT5_ARCHDATADIR}/bin
-	QT5_PLUGINDIR=${QT5_ARCHDATADIR}/plugins
-	QT5_LIBEXECDIR=${QT5_ARCHDATADIR}/libexec
-	QT5_IMPORTDIR=${QT5_ARCHDATADIR}/imports
-	QT5_QMLDIR=${QT5_ARCHDATADIR}/qml
-	QT5_DATADIR=${QT5_PREFIX}/share/qt5
-	QT5_DOCDIR=${QT5_PREFIX}/share/qt5-doc
-	QT5_TRANSLATIONDIR=${QT5_DATADIR}/translations
-	QT5_EXAMPLESDIR=${QT5_DATADIR}/examples
-	QT5_TESTSDIR=${QT5_DATADIR}/tests
-	QT5_SYSCONFDIR=${EPREFIX}/etc/xdg
-	readonly QT5_PREFIX QT5_HEADERDIR QT5_LIBDIR QT5_ARCHDATADIR \
-		QT5_BINDIR QT5_PLUGINDIR QT5_LIBEXECDIR QT5_IMPORTDIR \
-		QT5_QMLDIR QT5_DATADIR QT5_DOCDIR QT5_TRANSLATIONDIR \
-		QT5_EXAMPLESDIR QT5_TESTSDIR QT5_SYSCONFDIR
-
-	if [[ ${QT5_MODULE} == qtbase ]]; then
-		# see mkspecs/features/qt_config.prf
-		export QMAKEMODULES="${QT5_BUILD_DIR}/mkspecs/modules:${S}/mkspecs/modules:${QT5_ARCHDATADIR}/mkspecs/modules"
-	fi
-}
-
-# @FUNCTION: qt5_foreach_target_subdir
-# @INTERNAL
-# @DESCRIPTION:
-# Executes the command given as argument from inside each directory
-# listed in QT5_TARGET_SUBDIRS. Handles autotests subdirs automatically.
-qt5_foreach_target_subdir() {
-	[[ -z ${QT5_TARGET_SUBDIRS[@]} ]] && QT5_TARGET_SUBDIRS=("")
-
-	local subdir=
-	for subdir in "${QT5_TARGET_SUBDIRS[@]}"; do
-		if [[ ${EBUILD_PHASE} == test ]]; then
-			subdir=tests/auto${subdir#src}
-			[[ -d ${S}/${subdir} ]] || continue
-		fi
-
-		local msg="Running $* ${subdir:+in ${subdir}}"
-		einfo "${msg}"
-
-		mkdir -p "${QT5_BUILD_DIR}/${subdir}" || die -n || return $?
-		pushd "${QT5_BUILD_DIR}/${subdir}" >/dev/null || die -n || return $?
-
-		"$@" || die -n "${msg} failed" || return $?
-
-		popd >/dev/null || die -n || return $?
-	done
-}
-
-# @FUNCTION: qt5_symlink_tools_to_build_dir
-# @INTERNAL
-# @DESCRIPTION:
-# Symlinks qmake and a few other tools to QT5_BUILD_DIR,
-# so that they can be used when building other modules.
-qt5_symlink_tools_to_build_dir() {
-	local tool= tools=()
-	if [[ ${PN} != qtcore ]]; then
-		tools+=(qmake moc rcc qlalr)
-		[[ ${PN} != qtdbus ]] && tools+=(qdbuscpp2xml qdbusxml2cpp)
-		[[ ${PN} != qtwidgets ]] && tools+=(uic)
-	fi
-
-	mkdir -p "${QT5_BUILD_DIR}"/bin || die
-	pushd "${QT5_BUILD_DIR}"/bin >/dev/null || die
-
-	for tool in "${tools[@]}"; do
-		[[ -e ${QT5_BINDIR}/${tool} ]] || continue
-		ln -s "${QT5_BINDIR}/${tool}" . || die "failed to symlink ${tool}"
-	done
-
-	popd >/dev/null || die
-}
-
-# @FUNCTION: qt5_base_configure
-# @INTERNAL
-# @DESCRIPTION:
-# Runs ./configure for modules belonging to qtbase.
-qt5_base_configure() {
-	# setup toolchain variables used by configure
-	tc-export AR CC CXX OBJDUMP RANLIB STRIP
-	export LD="$(tc-getCXX)"
-
-	# bug 633838
-	unset QMAKESPEC XQMAKESPEC QMAKEPATH QMAKEFEATURES
-
-	# configure arguments
-	local conf=(
-		# installation paths
-		-prefix "${QT5_PREFIX}"
-		-bindir "${QT5_BINDIR}"
-		-headerdir "${QT5_HEADERDIR}"
-		-libdir "${QT5_LIBDIR}"
-		-archdatadir "${QT5_ARCHDATADIR}"
-		-plugindir "${QT5_PLUGINDIR}"
-		-libexecdir "${QT5_LIBEXECDIR}"
-		-importdir "${QT5_IMPORTDIR}"
-		-qmldir "${QT5_QMLDIR}"
-		-datadir "${QT5_DATADIR}"
-		-docdir "${QT5_DOCDIR}"
-		-translationdir "${QT5_TRANSLATIONDIR}"
-		-sysconfdir "${QT5_SYSCONFDIR}"
-		-examplesdir "${QT5_EXAMPLESDIR}"
-		-testsdir "${QT5_TESTSDIR}"
-
-		# force appropriate compiler
-		$(if use kernel_linux; then
-			if tc-is-gcc; then
-				echo -platform linux-g++
-			elif tc-is-clang; then
-				echo -platform linux-clang
-			fi
-		fi)
-
-		# configure in release mode by default,
-		# override via the CONFIG qmake variable
-		-release
-		-no-separate-debug-info
-
-		# no need to forcefully build host tools in optimized mode,
-		# just follow the overall debug/release build type
-		-no-optimized-tools
-
-		# licensing stuff
-		-opensource -confirm-license
-
-		# autodetect the highest supported version of the C++ standard
-		#-c++std <c++11|c++14|c++1z>
-
-		# build shared libraries
-		-shared
-
-		# disabling accessibility is not recommended by upstream, as
-		# it will break QStyle and may break other internal parts of Qt
-		-accessibility
-
-		# disable all SQL drivers by default, override in qtsql
-		-no-sql-db2 -no-sql-ibase -no-sql-mysql -no-sql-oci -no-sql-odbc
-		-no-sql-psql -no-sql-sqlite -no-sql-sqlite2 -no-sql-tds
-
-		# MIPS DSP instruction set extensions
-		$(is-flagq -mno-dsp   && echo -no-mips_dsp)
-		$(is-flagq -mno-dspr2 && echo -no-mips_dspr2)
-
-		# bug #773199 and friends
-		$(tc-cpp-is-true "defined(__SSE2__)" ${CFLAGS} ${CXXFLAGS} || echo -no-feature-sse2)
-
-		# use pkg-config to detect include and library paths
-		-pkg-config
-
-		# prefer system libraries (only common hard deps here)
-		-system-zlib
-		-system-pcre
-		-system-doubleconversion
-
-		# disable everything to prevent automagic deps (part 1)
-		-no-mtdev
-		-no-journald -no-syslog
-		-no-libpng -no-libjpeg
-		-no-freetype -no-harfbuzz
-		-no-openssl -no-libproxy
-		-no-feature-gssapi
-		-no-xcb-xlib
-
-		# bug 672340
-		-no-xkbcommon
-		-no-bundled-xcb-xinput
-
-		# cannot use -no-gif because there is no way to override it later
-		#-no-gif
-
-		# always enable glib event loop support
-		-glib
-
-		# disable everything to prevent automagic deps (part 2)
-		-no-gtk
-
-		# exclude examples and tests from default build
-		-nomake examples
-		-nomake tests
-		-no-compile-examples
-
-		# disable rpath on non-prefix (bugs 380415 and 417169)
-		$(usex prefix '' -no-rpath)
-
-		# print verbose information about each configure test
-		-verbose
-
-		# disable everything to prevent automagic deps (part 3)
-		-no-cups -no-evdev -no-tslib -no-icu -no-fontconfig -no-dbus
-
-		# let portage handle stripping
-		-no-strip
-
-		# precompiled headers can cause problems on hardened, so turn them off
-		-no-pch
-
-		# link-time code generation is not something we want to enable by default
-		-no-ltcg
-
-		# Qt 5 doesn't support -mno-direct-extern-access, so uses
-		# -Bsymbolic, which causes issues for consumers if not linking
-		# corectly (bug #754021).
-		-no-reduce-relocations
-
-		# use the system linker (gold will be selected automagically otherwise)
-		$(tc-ld-is-gold && echo -use-gold-linker || echo -no-use-gold-linker)
-
-		# disable all platform plugins by default, override in qtgui
-		-no-xcb -no-eglfs -no-kms -no-gbm -no-directfb -no-linuxfb
-
-		# always enable session management support: it doesn't need extra deps
-		# at configure time and turning it off is dangerous, see bug 518262
-		-sm
-
-		# typedef qreal to double (warning: changing this flag breaks the ABI)
-		-qreal double
-
-		# disable OpenGL and EGL support by default, override in qtgui,
-		# qtopengl, qtprintsupport and qtwidgets
-		-no-opengl -no-egl
-
-		# disable libinput-based generic plugin by default, override in qtgui
-		-no-libinput
-
-		# respect system proxies by default: it's the most natural
-		# setting, and it'll become the new upstream default in 5.8
-		-system-proxies
-
-		# do not build with -Werror
-		-no-warnings-are-errors
-
-		# enable in respective modules to avoid poisoning QT.global_private.enabled_features
-		-no-gui -no-widgets
-
-		# QTBUG-76521, default will change to zstd in Qt6
-		-no-zstd
-
-		# module-specific options
-		"${myconf[@]}"
-	)
-
-	pushd "${QT5_BUILD_DIR}" >/dev/null || die
-
-	einfo "Configuring with: ${conf[@]}"
-	"${S}"/configure "${conf[@]}" || die "configure failed"
-
-	# a forwarding header is no longer created since 5.8, causing the system
-	# config to always be used. bug 599636
-	# ${S}/include does not exist in live sources or kde.org snapshots
-	local basedir="${S}/"
-	if [[ ${QT5_BUILD_TYPE} == live ]] || [[ -n ${KDE_ORG_COMMIT} ]]; then
-		basedir=""
-	fi
-	cp src/corelib/global/qconfig.h "${basedir}"include/QtCore/ || die
-
-	popd >/dev/null || die
-
-}
-
-# @FUNCTION: qt5_tools_configure
-# @INTERNAL
-# @DESCRIPTION:
-# Most of qttools require files that are only generated when qmake is
-# run in the root directory. Related bugs: 676948, 716514.
-# Runs qt5_qmake in root directory to create qttools-config.pri and copy to
-# ${QT5_BUILD_DIR}, disabling modules other than ${PN} belonging to qttools.
-qt5_tools_configure() {
-	# configure arguments
-	local qmakeargs=(
-		--
-		# not packaged in Gentoo
-		-no-feature-distancefieldgenerator
-		-no-feature-kmap2qmap
-		-no-feature-macdeployqt
-		-no-feature-makeqpf
-		-no-feature-qev
-		-no-feature-qtattributionsscanner
-		-no-feature-windeployqt
-		-no-feature-winrtrunner
-	)
-
-	local i module=${PN}
-	case ${PN} in
-		linguist-tools) module=linguist ;;
-		*) ;;
-	esac
-	for i in assistant designer linguist pixeltool qdbus qdoc qtdiag qtpaths qtplugininfo; do
-		[[ ${module} != ${i} ]] && qmakeargs+=( -no-feature-${i} )
-	done
-
-	# allow the ebuild to override what we set here
-	myqmakeargs=( "${qmakeargs[@]}" "${myqmakeargs[@]}" )
-
-	qt5_configure_oos_quirk qttools-config.pri
-}
-
-# @FUNCTION: qt5_qmake_args
-# @INTERNAL
-# @DESCRIPTION:
-# Helper function to get the various toolchain-related variables.
-qt5_qmake_args() {
-	echo \
-		QMAKE_AR=\"$(tc-getAR)\" \
-		QMAKE_CC=\"$(tc-getCC)\" \
-		QMAKE_LINK_C=\"$(tc-getCC)\" \
-		QMAKE_LINK_C_SHLIB=\"$(tc-getCC)\" \
-		QMAKE_CXX=\"$(tc-getCXX)\" \
-		QMAKE_LINK=\"$(tc-getCXX)\" \
-		QMAKE_LINK_SHLIB=\"$(tc-getCXX)\" \
-		QMAKE_OBJCOPY=\"$(tc-getOBJCOPY)\" \
-		QMAKE_RANLIB= \
-		QMAKE_STRIP=\"$(tc-getSTRIP)\" \
-		QMAKE_CFLAGS=\"${CFLAGS}\" \
-		QMAKE_CFLAGS_RELEASE= \
-		QMAKE_CFLAGS_DEBUG= \
-		QMAKE_CXXFLAGS=\"${CXXFLAGS}\" \
-		QMAKE_CXXFLAGS_RELEASE= \
-		QMAKE_CXXFLAGS_DEBUG= \
-		QMAKE_LFLAGS=\"${LDFLAGS}\" \
-		QMAKE_LFLAGS_RELEASE= \
-		QMAKE_LFLAGS_DEBUG=
-}
-
-# @FUNCTION: qt5_qmake
-# @INTERNAL
-# @DESCRIPTION:
-# Helper function that runs qmake in the current target subdir.
-# Intended to be called by qt5_foreach_target_subdir().
-qt5_qmake() {
-	local projectdir=${PWD/#${QT5_BUILD_DIR}/${S}}
-	local qmakepath=
-	if [[ ${QT5_MODULE} == qtbase ]]; then
-		qmakepath=${QT5_BUILD_DIR}/bin
-	else
-		qmakepath=${QT5_BINDIR}
-	fi
-
-	"${qmakepath}"/qmake \
-		"${projectdir}" \
-		CONFIG+=$(usex debug debug release) \
-		CONFIG-=$(usex debug release debug) \
-		QMAKE_AR="$(tc-getAR) cqs" \
-		QMAKE_CC="$(tc-getCC)" \
-		QMAKE_LINK_C="$(tc-getCC)" \
-		QMAKE_LINK_C_SHLIB="$(tc-getCC)" \
-		QMAKE_CXX="$(tc-getCXX)" \
-		QMAKE_LINK="$(tc-getCXX)" \
-		QMAKE_LINK_SHLIB="$(tc-getCXX)" \
-		QMAKE_OBJCOPY="$(tc-getOBJCOPY)" \
-		QMAKE_RANLIB= \
-		QMAKE_STRIP="$(tc-getSTRIP)" \
-		QMAKE_CFLAGS="${CFLAGS}" \
-		QMAKE_CFLAGS_RELEASE= \
-		QMAKE_CFLAGS_DEBUG= \
-		QMAKE_CXXFLAGS="${CXXFLAGS}" \
-		QMAKE_CXXFLAGS_RELEASE= \
-		QMAKE_CXXFLAGS_DEBUG= \
-		QMAKE_LFLAGS="${LDFLAGS}" \
-		QMAKE_LFLAGS_RELEASE= \
-		QMAKE_LFLAGS_DEBUG= \
-		"${myqmakeargs[@]}" \
-		|| die "qmake failed (${projectdir#${S}/})"
-}
-
-# @FUNCTION: qt5_install_module_config
-# @INTERNAL
-# @DESCRIPTION:
-# Creates and installs gentoo-specific ${PN}-qconfig.{h,pri} and
-# ${PN}-qmodule.pri files.
-qt5_install_module_config() {
-	local x qconfig_add= qconfig_remove= qprivateconfig_add= qprivateconfig_remove=
-
-	> "${T}"/${PN}-qconfig.h
-	> "${T}"/${PN}-qconfig.pri
-	> "${T}"/${PN}-qmodule.pri
-
-	# generate qconfig_{add,remove} and ${PN}-qconfig.h
-	for x in "${QT5_GENTOO_CONFIG[@]}"; do
-		local flag=${x%%:*}
-		x=${x#${flag}:}
-		local feature=${x%%:*}
-		x=${x#${feature}:}
-		local macro=${x}
-		macro=$(tr 'a-z-' 'A-Z_' <<< "${macro}")
-
-		if [[ -z ${flag} ]] || { [[ ${flag} != '!' ]] && use ${flag}; }; then
-			[[ -n ${feature} ]] && qconfig_add+=" ${feature}"
-			[[ -n ${macro} ]] && echo "#define QT_${macro}" >> "${T}"/${PN}-qconfig.h
-		else
-			[[ -n ${feature} ]] && qconfig_remove+=" ${feature}"
-			[[ -n ${macro} ]] && echo "#define QT_NO_${macro}" >> "${T}"/${PN}-qconfig.h
-		fi
-	done
-
-	# install ${PN}-qconfig.h
-	[[ -s ${T}/${PN}-qconfig.h ]] && (
-		insinto "${QT5_HEADERDIR#"${EPREFIX}"}"/Gentoo
-		doins "${T}"/${PN}-qconfig.h
-	)
-
-	# generate and install ${PN}-qconfig.pri
-	[[ -n ${qconfig_add} ]] && echo "QCONFIG_ADD=${qconfig_add}" >> "${T}"/${PN}-qconfig.pri
-	[[ -n ${qconfig_remove} ]] && echo "QCONFIG_REMOVE=${qconfig_remove}" >> "${T}"/${PN}-qconfig.pri
-	[[ -s ${T}/${PN}-qconfig.pri ]] && (
-		insinto "${QT5_ARCHDATADIR#"${EPREFIX}"}"/mkspecs/gentoo
-		doins "${T}"/${PN}-qconfig.pri
-	)
-
-	# generate qprivateconfig
-	for x in "${QT5_GENTOO_PRIVATE_CONFIG[@]}"; do
-		local flag=${x%%:*}
-		x=${x#${flag}:}
-		local feature=${x%%:*}
-		x=${x#${feature}:}
-
-		if [[ -z ${flag} ]] || { [[ ${flag} != '!' ]] && use ${flag}; }; then
-			[[ -n ${feature} ]] && qprivateconfig_add+=" ${feature}"
-		else
-			[[ -n ${feature} ]] && qprivateconfig_remove+=" ${feature}"
-		fi
-	done
-
-	# generate and install ${PN}-qmodule.pri
-	[[ -n ${qprivateconfig_add} ]] && echo "QT.global_private.enabled_features = ${qprivateconfig_add}" >> "${T}"/${PN}-qmodule.pri
-	[[ -n ${qprivateconfig_remove} ]] && echo "QT.global_private.disabled_features = ${qprivateconfig_remove}" >> "${T}"/${PN}-qmodule.pri
-	[[ -s ${T}/${PN}-qmodule.pri ]] && (
-		insinto "${QT5_ARCHDATADIR#"${EPREFIX}"}"/mkspecs/gentoo
-		doins "${T}"/${PN}-qmodule.pri
-	)
-
-	# install the original {qconfig,qmodule}.pri from qtcore
-	[[ ${PN} == qtcore ]] && (
-		insinto "${QT5_ARCHDATADIR#"${EPREFIX}"}"/mkspecs/gentoo
-		newins "${D}${QT5_ARCHDATADIR}"/mkspecs/qconfig.pri qconfig-qtcore.pri
-		newins "${D}${QT5_ARCHDATADIR}"/mkspecs/qmodule.pri qmodule-qtcore.pri
-	)
-}
-
-# @FUNCTION: qt5_regenerate_global_configs
-# @INTERNAL
-# @DESCRIPTION:
-# Generates Gentoo-specific qconfig.{h,pri} and qmodule.pri according to the
-# build configuration.
-# Don't call die here because dying in pkg_post{inst,rm} only makes things worse.
-qt5_regenerate_global_configs() {
-	einfo "Regenerating gentoo-qconfig.h"
-
-	find "${ROOT}${QT5_HEADERDIR}"/Gentoo \
-		-name '*-qconfig.h' -a \! -name 'gentoo-qconfig.h' -type f \
-		-execdir cat '{}' + | sort -u > "${T}"/gentoo-qconfig.h
-
-	[[ -s ${T}/gentoo-qconfig.h ]] || ewarn "Generated gentoo-qconfig.h is empty"
-	cp "${T}"/gentoo-qconfig.h "${ROOT}${QT5_HEADERDIR}"/Gentoo/gentoo-qconfig.h \
-		|| eerror "Failed to install new gentoo-qconfig.h"
-
-	einfo "Updating QT_CONFIG in qconfig.pri"
-
-	local qconfig_pri=${ROOT}${QT5_ARCHDATADIR}/mkspecs/qconfig.pri
-	local qconfig_pri_orig=${ROOT}${QT5_ARCHDATADIR}/mkspecs/gentoo/qconfig-qtcore.pri
-	if [[ -f ${qconfig_pri} ]]; then
-		local x qconfig_add= qconfig_remove=
-		local qt_config new_qt_config=
-		if [[ -f ${qconfig_pri_orig} ]]; then
-			qt_config=$(sed -n 's/^QT_CONFIG\s*+=\s*//p' "${qconfig_pri_orig}")
-		else
-			qt_config=$(sed -n 's/^QT_CONFIG\s*+=\s*//p' "${qconfig_pri}")
-		fi
-
-		# generate list of QT_CONFIG entries from the existing list,
-		# appending QCONFIG_ADD and excluding QCONFIG_REMOVE
-		eshopts_push -s nullglob
-		for x in "${ROOT}${QT5_ARCHDATADIR}"/mkspecs/gentoo/*-qconfig.pri; do
-			qconfig_add+=" $(sed -n 's/^QCONFIG_ADD=\s*//p' "${x}")"
-			qconfig_remove+=" $(sed -n 's/^QCONFIG_REMOVE=\s*//p' "${x}")"
-		done
-		eshopts_pop
-		for x in ${qt_config} ${qconfig_add}; do
-			if ! has "${x}" ${new_qt_config} ${qconfig_remove}; then
-				new_qt_config+=" ${x}"
-			fi
-		done
-
-		# now replace the existing QT_CONFIG with the generated list
-		sed -i -e "s/^QT_CONFIG\s*+=.*/QT_CONFIG +=${new_qt_config}/" \
-			"${qconfig_pri}" || eerror "Failed to sed QT_CONFIG in ${qconfig_pri}"
-	else
-		ewarn "${qconfig_pri} does not exist or is not a regular file"
-	fi
-
-	einfo "Updating QT.global_private in qmodule.pri"
-
-	local qmodule_pri=${ROOT}${QT5_ARCHDATADIR}/mkspecs/qmodule.pri
-	local qmodule_pri_orig=${ROOT}${QT5_ARCHDATADIR}/mkspecs/gentoo/qmodule-qtcore.pri
-	if [[ -f ${qmodule_pri} && -f ${qmodule_pri_orig} ]]; then
-		local x
-		local qprivateconfig_enabled= qprivateconfig_disabled=
-		local qprivateconfig_orig_enabled= qprivateconfig_orig_disabled=
-		local new_qprivateconfig_enabled= new_qprivateconfig_disabled=
-
-		# generate lists of QT.global_private.{dis,en}abled_features
-		qprivateconfig_orig_enabled="$(sed -n 's/^QT.global_private.enabled_features\s=\s*//p' "${qmodule_pri_orig}")"
-		qprivateconfig_orig_disabled="$(sed -n 's/^QT.global_private.disabled_features\s=\s*//p' "${qmodule_pri_orig}")"
-		eshopts_push -s nullglob
-		for x in "${ROOT}${QT5_ARCHDATADIR}"/mkspecs/gentoo/*-qmodule.pri; do
-			qprivateconfig_enabled+=" $(sed -n 's/^QT.global_private.enabled_features\s=\s*//p' "${x}")"
-			qprivateconfig_disabled+=" $(sed -n 's/^QT.global_private.disabled_features\s=\s*//p' "${x}")"
-		done
-		eshopts_pop
-
-		# anything enabled is enabled, but anything disabled is
-		# only disabled if it isn't enabled somewhere else.
-		# this is because we need to forcibly disable some stuff
-		# in qtcore to support split qtbase.
-		new_qprivateconfig_enabled=${qprivateconfig_enabled}
-		for x in ${qprivateconfig_disabled}; do
-			if ! has "${x}" ${qprivateconfig_enabled}; then
-				new_qprivateconfig_disabled+=" ${x}"
-			fi
-		done
-
-		# check all items from the original qtcore qmodule.pri,
-		# and add them to the appropriate list if not overridden
-		# elsewhere
-		for x in ${qprivateconfig_orig_enabled}; do
-			if ! has "${x}" ${new_qprivateconfig_enabled} ${new_qprivateconfig_disabled}; then
-				new_qprivateconfig_enabled+=" ${x}"
-			fi
-		done
-		for x in ${qprivateconfig_orig_disabled}; do
-			if ! has "${x}" ${new_qprivateconfig_enabled} ${new_qprivateconfig_disabled}; then
-				new_qprivateconfig_disabled+=" ${x}"
-			fi
-		done
-
-		# now replace the existing QT.global_private.{dis,en}abled_features
-		# with the generated list
-		sed \
-			-e "s/^QT.global_private.enabled_features\s*=.*/QT.global_private.enabled_features =${new_qprivateconfig_enabled}/" \
-			-e "s/^QT.global_private.disabled_features\s*=.*/QT.global_private.disabled_features =${new_qprivateconfig_disabled}/" \
-			-i "${qmodule_pri}" || eerror "Failed to sed QT.global_private.enabled_features in ${qmodule_pri}"
-	else
-		ewarn "${qmodule_pri} or ${qmodule_pri_orig} does not exist or is not a regular file"
-	fi
-}
-
-fi
-
-EXPORT_FUNCTIONS src_prepare src_configure src_compile src_install src_test pkg_postinst pkg_postrm