repo/gentoo:master commit in: dev-lang/python/
MichaŠGórny <[email protected]>
| Newsgroups | gmane.linux.gentoo.cvs |
|---|---|
| Message-ID | <1786588317.14ce24e3edb1a1e318f9612b9d46b67792518e00.mgorny@gentoo> |
commit: 14ce24e3edb1a1e318f9612b9d46b67792518e00
Author: Michał Górny <mgorny <AT> gentoo <DOT> org>
AuthorDate: Thu Aug 13 01:46:23 2026 +0000
Commit: Michał Górny <mgorny <AT> gentoo <DOT> org>
CommitDate: Thu Aug 13 02:31:57 2026 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=14ce24e3
dev-lang/python: Bump to 3.10.21
Signed-off-by: Michał Górny <mgorny <AT> gentoo.org>
dev-lang/python/Manifest | 3 +
dev-lang/python/python-3.10.21.ebuild | 572 ++++++++++++++++++++++++++++++++++
2 files changed, 575 insertions(+)
diff --git a/dev-lang/python/Manifest b/dev-lang/python/Manifest
index 6e2f949fe771..10f66aacd41b 100644
--- a/dev-lang/python/Manifest
+++ b/dev-lang/python/Manifest
@@ -2,6 +2,8 @@ DIST Python-2.7.18.tar.xz 12854736 BLAKE2B 060a621c91dd8e3d321aec99d44c17aa67381
DIST Python-2.7.18.tar.xz.asc 833 BLAKE2B 1d98770e46171971fb99994508d238c01d2755281d2f94353314014d9e83e0ec5f0b3e3950ea1fdf5fce9ba6b8f55312355845c2a3fc4291c27ee56fe6215448 SHA512 c2a5f5a52f47dec52460ad3275758d4e5de6e7075c3def4353c988d74d563a39b42cae2d5eb24e2a23a6247cef69100f91620b11a49c2359fbf99b203c9cbda8
DIST Python-3.10.20.tar.xz 19868028 BLAKE2B 2c87aba3688454eeba9828689f7d6b4cd31d12b23cff8849f6565ba3731030a726f00285d95c301f4cd6ea4316a0b63b10b2d551e03c7eaf7750f69a422626e1 SHA512 591d3acf7ef47307b8c58fec9516731b374bcdf6eb21883410f67402f823a183f1abffec1116583e394610730f414d5a98b4c3437ea5174a4d2adbb99b8f6e5b
DIST Python-3.10.20.tar.xz.asc 833 BLAKE2B a0c698708b74cc9510374c07cc65b69fd492aeef1e910e58289f7f197edf5d42b4a14a09971c36fd8e8d01b744197a58ce081a8830610009306136ee3dc279ff SHA512 cb90ce514c63c63adc10cbb3db778eae626b922461715954daf08b3a3a99b8b4c750fded624787b7d28fc10a203b0e0e5494b91e5305ef56a23fda46c023c203
+DIST Python-3.10.21.tar.xz 19896516 BLAKE2B aeca599f2f94b333c0bf1e4cb8d8ec6a60fc981686a436406345ab108dd913228eef514e52414c07d606f72ab716c90de674c6d7516aeb58e0393909bbc8bab8 SHA512 6f6de7c5e4c0457f2d189ed5d111c83fb8775e19123afe4f9fd0ae2b93f3fa2bbb7ad849ade6bb5227d4a6a3d63abc8e167fbe5fb54fa715660c89fd6274daee
+DIST Python-3.10.21.tar.xz.asc 833 BLAKE2B 1933b63b13e32c8ca9d7edfbad474569da81630d17e0be49b01d9092e25773af2a1c09058382d75c9783b426418a891d3ee68a24e64b9e8efd46bf6955d43f9f SHA512 72d6aeaa0f51e527f82392cf1f969b0ad50a48fe10e8b7e5feb6117718223d00757f7b375b3ac82e257571d5a61f8162e9dd59b81fcf8f2a441c6deb42be71cb
DIST Python-3.11.15.tar.xz 20332596 BLAKE2B 8be4dd30aff7a2615fd37754dc6ed1caede1507ef7716e500a2e1d1aa421668e810a2c13dfc743bcd47576a7715588476bd8c3d42275a24215a85109d6da7062 SHA512 1667f4839acfd23d05917a12993983b7dc3ab4438a37c72496fd040ac6981f4dea9dc95461ca701a6862beedb56c423fb83398b8b18e39e1efe12f539fced1c1
DIST Python-3.11.15.tar.xz.asc 833 BLAKE2B dd4134701ef36d22c7bca8ea16794d3e85dc2a2b6323b2babfdeb2652ade1db8b7d4256cb68a40ee1c1a2b5885666e25791c1e4d6c044cc8d49f68693ec65887 SHA512 673822ca037acb521bf7d3e7433f83cc2d60c8d102cfbf6695234e2a50ce12a7003040ad4017438510ebbb1ff0ba6727253fae250b07bc0e3d24b5578e80be52
DIST Python-3.11.16.tar.xz 20328716 BLAKE2B 1a8cb139045e28f4176b1e97ab73abbb2e206e56375f198325f25c17a452a6929a6cc0ba1b25c851f0c5ac33c7c0e70bac4ef39ef3c21a10233a22f01fd2ffa9 SHA512 f4e168d35596c2df080663d8e8b3472f03bace987d46b49b8410f2425ba193215b9880c7d03d4653ec31c83b72209d95866fc1cb6d666799145075b092f64a48
@@ -32,6 +34,7 @@ DIST Python-3.9.25.tar.xz 20183236 BLAKE2B 01c5af78659324e2a596611c11c0fa982f81f
DIST Python-3.9.25.tar.xz.asc 833 BLAKE2B 3ab506f78b53aed0b3ebbeb620e3763857aafca7756f0f9a594fdc27c2fc8b002e338ae34d54f7e9e5a52fa701d3ab4de44ab4f4328034d77a207f066abafc2e SHA512 83f0a0e558aa89a106bdffeeb9b0fa2685fbd7be5c5954f9176c59c6c7023716207b07239f202b3508cbb98ca34572161955f0bfd3732fdb9265721cd6723dbe
DIST python-gentoo-patches-2.7.18_p16.tar.xz 35448 BLAKE2B 0139c0944f62f9cdd236f6a8557e0ed19704c7d72869af1cb7d8bd3e646a746cd4a0201e1b44232a5e78ef49f254db20b0d0271bf744fbfd4fe0f1e99b8f3e6c SHA512 810be590d0e06fab4b2165e6852ca49662f09dcd7e20b47a29f613ad7653252c8dfac3f0eb228d77c8a914efa7c08788b2fbd552a4b47504f5fd0ec17450c48f
DIST python-gentoo-patches-3.10.20.tar.xz 29180 BLAKE2B 3179a983fd4f744a6d29cb345f9e3ee1348c4feeaf2eb67ff2f3069811764129b5fc10f728c2cbc3731c7d3bbe566f08d8d4b564b907d2492ea063c284424c1a SHA512 bd7c8fea81d3e7eada0e01ff60cf37133f66d61fab3d39778ded88f445f7830493c3ef2cfbd136bc1d15526730f4b4455d6b0adbefb6a275e6b8cfe53255eb34
+DIST python-gentoo-patches-3.10.21.tar.xz 30980 BLAKE2B 5e77e0a544008c26db03d3b35f4babe95e7dbf932312439931671974094de9a94eacbd222491e19d0e3a3ce5d9cbec550224219b8b6598ca8e513336b3c09ac3 SHA512 36cbf684fbe14ee9bc3c75747c47a4588ce1cc5cfcb4461ad6d3381aec7d03150f54836836ac08fe4fca7ceeac14d16442552ef090c714f4d4ae0483a80f9470
DIST python-gentoo-patches-3.11.15.tar.xz 15988 BLAKE2B 16e98450749ebd1c617acbb9aba380fff50a8f7dba19f3f99edd3bd387c1a5d61d78cbf493cf003dfe03d2be59374ad89077b39fe203059bbbb881ae02a72ea5 SHA512 b705c72a585e315eb3ba69ffbf2a80836f0fc894fa8ae2c22768e6aa8ac2a23aada5def3d2635193793f58e3da81f0f10281c47bd8e129e1fd2c9167d292265b
DIST python-gentoo-patches-3.11.16.tar.xz 17844 BLAKE2B 5b94818357f434ee98779f42bfb0495619eb74caabed843c9b2d0704d3808910e0ef4d29afa832b81ec2ca6eb81d125815d69948d16c033671fcb6a98e64634b SHA512 d86e3efefe05f462487ce5bee96d2c8bd5630c5a4cf4d0f40956aeae7d1bbea398d490e0faa44569c1820f931df8c9652f7941510b8cd12766ffdf66e7ced4f6
DIST python-gentoo-patches-3.12.13_p1.tar.xz 12408 BLAKE2B 2b232c2742eafcb803713c837b4ddaa38f45c88e707ec272571739570f9e2e5c94644681369d887992eadf5f0c1178489f1aa3a7d8163a2aa4ce6a86732e73da SHA512 e06d78ad24c9fbc3fa9c47b25ba722342ddd140aa30f624b41d605dae40d00ab956d879a247db2d7980c063a1472de40587a0d3cd6947e560aa7e8d0e4f89309
diff --git a/dev-lang/python/python-3.10.21.ebuild b/dev-lang/python/python-3.10.21.ebuild
new file mode 100644
index 000000000000..3b5799d53f6c
--- /dev/null
+++ b/dev-lang/python/python-3.10.21.ebuild
@@ -0,0 +1,572 @@
+# Copyright 1999-2026 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI="8"
+WANT_LIBTOOL="none"
+
+inherit autotools check-reqs flag-o-matic multiprocessing pax-utils
+inherit prefix toolchain-funcs verify-sig
+
+MY_PV=${PV/_rc/rc}
+MY_P="Python-${MY_PV%_p*}"
+PYVER=$(ver_cut 1-2)
+PATCHSET="python-gentoo-patches-${MY_PV}"
+
+DESCRIPTION="An interpreted, interactive, object-oriented programming language"
+HOMEPAGE="
+ https://www.python.org/
+ https://github.com/python/cpython/
+"
+SRC_URI="
+ https://www.python.org/ftp/python/${PV%%_*}/${MY_P}.tar.xz
+ https://distfiles.gentoo.org/pub/proj/python/patchsets/${PYVER%t}/${PATCHSET}.tar.xz
+ verify-sig? (
+ https://www.python.org/ftp/python/${PV%%_*}/${MY_P}.tar.xz.asc
+ )
+"
+S="${WORKDIR}/${MY_P}"
+
+LICENSE="PSF-2"
+SLOT="${PYVER}"
+KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86"
+IUSE="
+ bluetooth debug +ensurepip examples gdbm libedit +ncurses pgo
+ +readline +sqlite +ssl test tk valgrind
+"
+RESTRICT="!test? ( test )"
+
+# Do not add a dependency on dev-lang/python to this ebuild.
+# If you need to apply a patch which requires python for bootstrapping, please
+# run the bootstrap code on your dev box and include the results in the
+# patchset. See bug 447752.
+
+RDEPEND="
+ app-arch/bzip2:=
+ app-arch/xz-utils:=
+ app-misc/mime-types
+ >=dev-libs/expat-2.1:=
+ dev-libs/libffi:=
+ dev-libs/mpdecimal:=
+ dev-python/gentoo-common
+ sys-apps/util-linux
+ >=virtual/zlib-1.1.3:=
+ virtual/libcrypt:=
+ virtual/libintl
+ gdbm? ( sys-libs/gdbm:=[berkdb] )
+ ncurses? ( >=sys-libs/ncurses-5.2:= )
+ readline? (
+ !libedit? ( >=sys-libs/readline-4.1:= )
+ libedit? ( dev-libs/libedit:= )
+ )
+ sqlite? ( >=dev-db/sqlite-3.3.8:3= )
+ ssl? ( >=dev-libs/openssl-1.1.1:= )
+ tk? (
+ >=dev-lang/tcl-8.0:=
+ >=dev-lang/tk-8.0:=
+ dev-tcltk/blt:=
+ dev-tcltk/tix
+ )
+"
+# bluetooth requires headers from bluez
+DEPEND="
+ ${RDEPEND}
+ bluetooth? ( net-wireless/bluez )
+ test? (
+ app-arch/xz-utils
+ dev-python/ensurepip-pip
+ dev-python/ensurepip-setuptools
+ )
+ valgrind? ( dev-debug/valgrind )
+"
+# autoconf-archive needed to eautoreconf
+BDEPEND="
+ dev-build/autoconf-archive
+ app-alternatives/awk
+ virtual/pkgconfig
+ verify-sig? ( sec-keys/openpgp-keys-python )
+"
+PDEPEND="
+ ensurepip? (
+ dev-python/ensurepip-pip
+ dev-python/ensurepip-setuptools
+ )
+"
+
+VERIFY_SIG_OPENPGP_KEY_PATH=/usr/share/openpgp-keys/python.org.asc
+
+# large file tests involve a 2.5G file being copied (duplicated)
+CHECKREQS_DISK_BUILD=5500M
+
+QA_PKGCONFIG_VERSION=${PYVER}
+# false positives -- functions specific to *BSD
+QA_CONFIG_IMPL_DECL_SKIP=( chflags lchflags )
+
+pkg_pretend() {
+ use test && check-reqs_pkg_pretend
+}
+
+pkg_setup() {
+ use test && check-reqs_pkg_setup
+}
+
+src_unpack() {
+ if use verify-sig; then
+ verify-sig_verify_detached "${DISTDIR}"/${MY_P}.tar.xz{,.asc}
+ fi
+ default
+}
+
+src_prepare() {
+ # Ensure that internal copies of expat and libffi are not used.
+ rm -r Modules/expat || die
+ rm -r Modules/_ctypes/libffi* || die
+
+ local PATCHES=(
+ "${WORKDIR}/${PATCHSET}"
+ )
+
+ default
+
+ # https://bugs.gentoo.org/850151
+ sed -i -e "s:@@GENTOO_LIBDIR@@:$(get_libdir):g" setup.py || die
+
+ # force the correct number of jobs
+ # https://bugs.gentoo.org/737660
+ local jobs=$(makeopts_jobs)
+ sed -i -e "s:-j0:-j${jobs}:" Makefile.pre.in || die
+ sed -i -e "/self\.parallel/s:True:${jobs}:" setup.py || die
+
+ eautoreconf
+}
+
+build_cbuild_python() {
+ # Hack to workaround get_libdir not being able to handle CBUILD, bug #794181
+ local cbuild_libdir=$(unset PKG_CONFIG_PATH ; $(tc-getBUILD_PKG_CONFIG) --keep-system-libs --libs-only-L libffi)
+
+ # pass system CFLAGS & LDFLAGS as _NODIST, otherwise they'll get
+ # propagated to sysconfig for built extensions
+ #
+ # -fno-lto to avoid bug #700012 (not like it matters for mini-CBUILD Python anyway)
+ local -x CFLAGS_NODIST="${BUILD_CFLAGS} -fno-lto"
+ local -x LDFLAGS_NODIST="${BUILD_LDFLAGS} -fno-lto"
+ local -x CFLAGS= LDFLAGS=
+ local -x BUILD_CFLAGS="${CFLAGS_NODIST}"
+ local -x BUILD_LDFLAGS="${LDFLAGS_NODIST}"
+
+ # We need to build our own Python on CBUILD first, and feed it in.
+ # bug #847910 and bug #864911.
+ local myeconfargs_cbuild=(
+ "${myeconfargs[@]}"
+
+ --prefix="${BROOT}"/usr
+ --libdir="${cbuild_libdir:2}"
+
+ # Avoid needing to load the right libpython.so.
+ --disable-shared
+
+ # As minimal as possible for the mini CBUILD Python
+ # we build just for cross.
+ --without-lto
+ --disable-optimizations
+ )
+
+ mkdir "${WORKDIR}"/${P}-${CBUILD} || die
+ pushd "${WORKDIR}"/${P}-${CBUILD} &> /dev/null || die
+ # We disable _ctypes and _crypt for CBUILD because Python's setup.py can't handle locating
+ # libdir correctly for cross.
+ PYTHON_DISABLE_MODULES+=" _ctypes _crypt" \
+ ECONF_SOURCE="${S}" econf_build "${myeconfargs_cbuild[@]}"
+
+ # Avoid as many dependencies as possible for the cross build.
+ cat >> Makefile <<-EOF || die
+ MODULE_NIS=disabled
+ MODULE__DBM=disabled
+ MODULE__GDBM=disabled
+ MODULE__DBM=disabled
+ MODULE__SQLITE3=disabled
+ MODULE__HASHLIB=disabled
+ MODULE__SSL=disabled
+ MODULE__CURSES=disabled
+ MODULE__CURSES_PANEL=disabled
+ MODULE_READLINE=disabled
+ MODULE__TKINTER=disabled
+ MODULE_PYEXPAT=disabled
+ MODULE_ZLIB=disabled
+ EOF
+
+ # Unfortunately, we do have to build this immediately, and
+ # not in src_compile, because CHOST configure for Python
+ # will check the existence of the Python it was pointed to
+ # immediately.
+ PYTHON_DISABLE_MODULES+=" _ctypes _crypt" emake
+ popd &> /dev/null || die
+}
+
+src_configure() {
+ # disable automagic bluetooth headers detection
+ if ! use bluetooth; then
+ local -x ac_cv_header_bluetooth_bluetooth_h=no
+ fi
+ local disable
+ use gdbm || disable+=" gdbm"
+ use ncurses || disable+=" _curses _curses_panel"
+ use readline || disable+=" readline"
+ use sqlite || disable+=" _sqlite3"
+ use ssl || export PYTHON_DISABLE_SSL="1"
+ use tk || disable+=" _tkinter"
+ export PYTHON_DISABLE_MODULES="${disable}"
+
+ if [[ -n "${PYTHON_DISABLE_MODULES}" ]]; then
+ einfo "Disabled modules: ${PYTHON_DISABLE_MODULES}"
+ fi
+
+ filter-flags -malign-double
+
+ # Export CXX so it ends up in /usr/lib/python3.X/config/Makefile.
+ # PKG_CONFIG needed for cross.
+ tc-export CXX PKG_CONFIG
+
+ local dbmliborder=
+ if use gdbm; then
+ dbmliborder+="${dbmliborder:+:}gdbm"
+ fi
+
+ # Set baseline test skip flags.
+ COMMON_TEST_SKIPS=(
+ # running gdb inside an ebuild as non-root, within sandbox,
+ # and possibly within a container is unreliable
+ -x test_gdb
+ )
+
+ # Arch-specific skips. See #931888 for a collection of these.
+ case ${CHOST} in
+ alpha*)
+ COMMON_TEST_SKIPS+=(
+ -x test_builtin
+ -x test_capi
+ -x test_cmath
+ -x test_float
+ # timeout
+ -x test_free_threading
+ -x test_math
+ -x test_numeric_tower
+ -x test_random
+ -x test_statistics
+ # bug 653850
+ -x test_resource
+ -x test_strtod
+ )
+ ;;
+ mips*)
+ COMMON_TEST_SKIPS+=(
+ -x test_ctypes
+ -x test_external_inspection
+ -x test_statistics
+ )
+ ;;
+ powerpc64-*) # big endian
+ COMMON_TEST_SKIPS+=(
+ -x test_descr
+ )
+ ;;
+ riscv*)
+ COMMON_TEST_SKIPS+=(
+ -x test_urllib2
+ )
+ ;;
+ sparc*)
+ COMMON_TEST_SKIPS+=(
+ # bug 788022
+ -x test_multiprocessing_fork
+ -x test_multiprocessing_forkserver
+ -x test_multiprocessing_spawn
+
+ -x test_ctypes
+ -x test_descr
+ # bug 931908
+ -x test_exceptions
+ )
+ ;;
+ esac
+
+ # musl-specific skips
+ use elibc_musl && COMMON_TEST_SKIPS+=(
+ # various musl locale deficiencies
+ -x test__locale
+ -x test_c_locale_coercion
+ -x test_locale
+ -x test_re
+
+ # known issues with find_library on musl
+ # https://bugs.python.org/issue21622
+ -x test_ctypes
+
+ # fpathconf, ttyname errno values
+ -x test_os
+ )
+
+ if use pgo; then
+ local profile_task_flags=(
+ -m test
+ "-j$(makeopts_jobs)"
+ --pgo-extended
+ -u-network
+
+ # We use a timeout because of how often we've had hang issues
+ # here. It also matches the default upstream PROFILE_TASK.
+ --timeout 1200
+
+ "${COMMON_TEST_SKIPS[@]}"
+
+ -x test_dtrace
+
+ # All of these seem to occasionally hang for PGO inconsistently
+ # They'll even hang here but be fine in src_test sometimes.
+ # bug #828535 (and related: bug #788022)
+ -x test_asyncio
+ -x test_concurrent_futures
+ -x test_httpservers
+ -x test_logging
+ -x test_multiprocessing_fork
+ -x test_socket
+ -x test_xmlrpc
+
+ # Hangs (actually runs indefinitely executing itself w/ many cpython builds)
+ # bug #900429
+ -x test_tools
+ )
+
+ # Arch-specific skips. See #931888 for a collection of these.
+ case ${CHOST} in
+ alpha*)
+ profile_task_flags+=(
+ -x test_os
+ )
+ ;;
+ hppa*)
+ profile_task_flags+=(
+ -x test_descr
+ # bug 931908
+ -x test_exceptions
+ -x test_os
+ )
+ ;;
+ powerpc64-*) # big endian
+ profile_task_flags+=(
+ # bug 931908
+ -x test_exceptions
+ )
+ ;;
+ riscv*)
+ profile_task_flags+=(
+ -x test_statistics
+ )
+ ;;
+ esac
+
+ if has_version "app-arch/rpm" ; then
+ # Avoid sandbox failure (attempts to write to /var/lib/rpm)
+ profile_task_flags+=(
+ -x test_distutils
+ )
+ fi
+ local -x PROFILE_TASK="${profile_task_flags[*]}"
+ fi
+
+ local myeconfargs=(
+ # glibc-2.30 removes it; since we can't cleanly force-rebuild
+ # Python on glibc upgrade, remove it proactively to give
+ # a chance for users rebuilding python before glibc
+ ac_cv_header_stropts_h=no
+
+ --enable-shared
+ --without-static-libpython
+ --enable-ipv6
+ --infodir='${prefix}/share/info'
+ --mandir='${prefix}/share/man'
+ --with-dbmliborder="${dbmliborder}"
+ --with-libc=
+ --enable-loadable-sqlite-extensions
+ --without-ensurepip
+ --without-lto
+ --with-system-expat
+ --with-system-ffi
+ --with-system-libmpdec
+ --with-wheel-pkg-dir="${EPREFIX}"/usr/lib/python/ensurepip
+
+ $(use_with debug assertions)
+ $(use_enable pgo optimizations)
+ $(use_with readline readline "$(usex libedit editline readline)")
+ $(use_with valgrind)
+ )
+
+ # disable implicit optimization/debugging flags
+ local -x OPT=
+
+ # https://bugs.gentoo.org/700012
+ if tc-is-lto; then
+ append-cflags $(test-flags-CC -ffat-lto-objects)
+ myeconfargs+=(
+ --with-lto
+ )
+ fi
+
+ if tc-is-cross-compiler ; then
+ build_cbuild_python
+ # Point the imminent CHOST build to the Python we just
+ # built for CBUILD.
+ export PATH="${WORKDIR}/${P}-${CBUILD}:${PATH}"
+ fi
+
+ # pass system CFLAGS & LDFLAGS as _NODIST, otherwise they'll get
+ # propagated to sysconfig for built extensions
+ local -x CFLAGS_NODIST=${CFLAGS}
+ local -x LDFLAGS_NODIST=${LDFLAGS}
+ local -x CFLAGS= LDFLAGS=
+
+ # Fix implicit declarations on cross and prefix builds. Bug #674070.
+ if use ncurses; then
+ append-cppflags -I"${ESYSROOT}"/usr/include/ncursesw
+ fi
+
+ hprefixify setup.py
+ econf "${myeconfargs[@]}"
+
+ if grep -q "#define POSIX_SEMAPHORES_NOT_ENABLED 1" pyconfig.h; then
+ eerror "configure has detected that the sem_open function is broken."
+ eerror "Please ensure that /dev/shm is mounted as a tmpfs with mode 1777."
+ die "Broken sem_open function (bug 496328)"
+ fi
+
+ # install epython.py as part of stdlib
+ echo "EPYTHON='python${PYVER}'" > Lib/epython.py || die
+}
+
+src_compile() {
+ # Ensure sed works as expected
+ # https://bugs.gentoo.org/594768
+ local -x LC_ALL=C
+ # Prevent using distutils bundled by setuptools.
+ # https://bugs.gentoo.org/823728
+ export SETUPTOOLS_USE_DISTUTILS=stdlib
+
+ # Save PYTHONDONTWRITEBYTECODE so that 'has_version' doesn't
+ # end up writing bytecode & violating sandbox.
+ # bug #831897
+ local -x _PYTHONDONTWRITEBYTECODE=${PYTHONDONTWRITEBYTECODE}
+
+ # Gentoo hack to disable accessing system site-packages
+ export GENTOO_CPYTHON_BUILD=1
+
+ if use pgo ; then
+ # bug 660358
+ local -x COLUMNS=80
+ local -x PYTHONDONTWRITEBYTECODE=
+ local -x TMPDIR=/var/tmp
+ fi
+
+ # also need to clear the flags explicitly here or they end up
+ # in _sysconfigdata*
+ emake CPPFLAGS= CFLAGS= LDFLAGS=
+
+ # Restore saved value from above.
+ local -x PYTHONDONTWRITEBYTECODE=${_PYTHONDONTWRITEBYTECODE}
+
+ # Work around bug 329499. See also bug 413751 and 457194.
+ if has_version dev-libs/libffi[pax-kernel]; then
+ pax-mark E python
+ else
+ pax-mark m python
+ fi
+}
+
+src_test() {
+ # Tests will not work when cross compiling.
+ if tc-is-cross-compiler; then
+ elog "Disabling tests due to crosscompiling."
+ return
+ fi
+
+ local test_opts=(
+ --verbose3
+ -u-network
+ -j "$(makeopts_jobs)"
+ "${COMMON_TEST_SKIPS[@]}"
+ )
+
+ # bug 660358
+ local -x COLUMNS=80
+ local -x PYTHONDONTWRITEBYTECODE=
+ local -x TMPDIR=/var/tmp
+
+ nonfatal emake -Onone test EXTRATESTOPTS="${test_opts[*]}" \
+ CPPFLAGS= CFLAGS= LDFLAGS= < /dev/tty
+ local ret=${?}
+
+ [[ ${ret} -eq 0 ]] || die "emake test failed"
+}
+
+src_install() {
+ local libdir=${ED}/usr/lib/python${PYVER}
+
+ emake DESTDIR="${D}" TEST_MODULES=no altinstall
+
+ # Fix collisions between different slots of Python.
+ rm "${ED}/usr/$(get_libdir)/libpython3.so" || die
+
+ # Cheap hack to get version with ABIFLAGS
+ local abiver=$(cd "${ED}/usr/include"; echo python*)
+ if [[ ${abiver} != python${PYVER} ]]; then
+ # Replace python3.X with a symlink to python3.Xm
+ rm "${ED}/usr/bin/python${PYVER}" || die
+ dosym "${abiver}" "/usr/bin/python${PYVER}"
+ # Create python3.X-config symlink
+ dosym "${abiver}-config" "/usr/bin/python${PYVER}-config"
+ # Create python-3.5m.pc symlink
+ dosym "python-${PYVER}.pc" "/usr/$(get_libdir)/pkgconfig/${abiver/${PYVER}/-${PYVER}}.pc"
+ fi
+
+ # python seems to get rebuilt in src_install (bug 569908)
+ # Work around it for now.
+ if has_version dev-libs/libffi[pax-kernel]; then
+ pax-mark E "${ED}/usr/bin/${abiver}"
+ else
+ pax-mark m "${ED}/usr/bin/${abiver}"
+ fi
+
+ rm -r "${libdir}"/ensurepip/_bundled || die
+ if ! use ensurepip; then
+ rm -r "${libdir}"/ensurepip || die
+ fi
+ if ! use sqlite; then
+ rm -r "${libdir}/"sqlite3 || die
+ fi
+ if ! use tk; then
+ rm -r "${ED}/usr/bin/idle${PYVER}" || die
+ rm -r "${libdir}/"{idlelib,tkinter} || die
+ fi
+
+ ln -s ../python/EXTERNALLY-MANAGED "${libdir}/EXTERNALLY-MANAGED" || die
+
+ dodoc Misc/{ACKS,HISTORY,NEWS}
+
+ if use examples; then
+ docinto examples
+ find Tools -name __pycache__ -exec rm -fr {} + || die
+ dodoc -r Tools
+ fi
+ insinto /usr/share/gdb/auto-load/usr/$(get_libdir) #443510
+ local libname=$(
+ printf 'e:\n\t@echo $(INSTSONAME)\ninclude Makefile\n' |
+ emake --no-print-directory -s -f - 2>/dev/null
+ )
+ newins Tools/gdb/libpython.py "${libname}"-gdb.py
+
+ newconfd "${FILESDIR}/pydoc.conf" pydoc-${PYVER}
+ newinitd "${FILESDIR}/pydoc.init" pydoc-${PYVER}
+ sed \
+ -e "s:@PYDOC_PORT_VARIABLE@:PYDOC${PYVER/./_}_PORT:" \
+ -e "s:@PYDOC@:pydoc${PYVER}:" \
+ -i "${ED}/etc/conf.d/pydoc-${PYVER}" \
+ "${ED}/etc/init.d/pydoc-${PYVER}" || die "sed failed"
+}