repo/gentoo:master commit in: sys-firmware/intel-microcode/
"Mike Pagano" <[email protected]>
| Newsgroups | gmane.linux.gentoo.cvs |
|---|---|
| Message-ID | <1786623253.aeead03ed276a2ec7f2a8f002649abcf335f1030.mpagano@gentoo> |
commit: aeead03ed276a2ec7f2a8f002649abcf335f1030
Author: Mike Pagano <mpagano <AT> gentoo <DOT> org>
AuthorDate: Thu Aug 13 12:14:13 2026 +0000
Commit: Mike Pagano <mpagano <AT> gentoo <DOT> org>
CommitDate: Thu Aug 13 12:14:13 2026 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=aeead03e
sys-firmware/intel-microcode: add 20260812_p20260813
Signed-off-by: Mike Pagano <mpagano <AT> gentoo.org>
sys-firmware/intel-microcode/Manifest | 2 +
.../intel-microcode-20260812_p20260813.ebuild | 340 +++++++++++++++++++++
2 files changed, 342 insertions(+)
diff --git a/sys-firmware/intel-microcode/Manifest b/sys-firmware/intel-microcode/Manifest
index d40dcb3e69cc..4cecdb756d35 100644
--- a/sys-firmware/intel-microcode/Manifest
+++ b/sys-firmware/intel-microcode/Manifest
@@ -2,8 +2,10 @@ DIST intel-microcode-collection-20260211.tar.xz 24796412 BLAKE2B a5944ed538a1d7d
DIST intel-microcode-collection-20260227.tar.xz 26976652 BLAKE2B 7a49dfcd62d9ba1773768954b4aaff98c37ae50a2be16c671a78a4046c5523634bc19809b4bbef03cd7a60e8c710ce477a9b0949ff6a8ddc8aa9f8590143de23 SHA512 1ce5428d50e692015b9c919049bda27215453aaddbcb8bc3c8c3312ad763ca9f102b0cc614905931441e031a5fc1ac7f54dd367a0b4506b41f73e7260e11ee18
DIST intel-microcode-collection-20260513.tar.xz 27365080 BLAKE2B a2c984da2889ed13e4b671fa957662205ef11c3e3c0bc88c50e56460b7647346393daedbd363daac70e9d7a1d21ab81653186ff1be20e56d04e5345b45d870f5 SHA512 4be613c12063c42867e389a7881195c762ec2a7866fdde226c4e00d4cf9697b305884b02e0c2fc9194c2486c969babcdadd607171c729fa1100d2687f52e98d2
DIST intel-microcode-collection-20260811.tar.xz 28353696 BLAKE2B c4707e1bf35e605bae42f17baeb1f4323573b49f3df0bb3b5225e4b8b6e34cb3b258a9a0c9e8a596efa1700fb14313dbc7bb98cd74c9c8c8f74153a89f48df96 SHA512 4b66be0b2ad421092feaf2e541a04468e522ad871cb1377bb617dab0fff0ac940b00942872311e387f5d077bff49c2a5a34c972c0e81ed4da0c69e6318daf783
+DIST intel-microcode-collection-20260813.tar.xz 28353696 BLAKE2B 7e1a95f5b38a85d5c4cc33fcedc491200526670d61d5c5e978fe30459575dbdc7e4a141b0a226621f5140e58346380361960db991ac735420676615b0f126e54 SHA512 9cb8126b88c2f0db0e9703b926507872053fcfcd831a68d4a3fa69b38470a61cb223c073a48e2554c1a7c605ea856b681d12d49c7a836e7248b09e06c2f0d21d
DIST intel-ucode-sig_0x406e3-rev_0xd6.bin 101376 BLAKE2B 66d55867954d69dda1425febd93bb8c89f7aa836d504f8b5fee127f8505bcf2246f4fcc55cc245bc5e532528d60cca2eee278de7ab5174dc2862db7982a2b36f SHA512 248066b521bf512b5d8e4a8c7e921464ce52169c954d6e4ca580d8c172cd789519e22b4cf56c212e452b4191741f0202019f7061d322c9433b5af9ce5413b567
DIST microcode-20260210.tar.gz 16622114 BLAKE2B 3b3a8fef499a67af0264550b457ae7de4f6965d9c8c02cc1b5b0f02316580662397016287510e09274e241d8d9cb7d70245f05a584f746515ac7c9bbe4a5cb28 SHA512 ec4ed32600ce1ce2c9c52796458f92205c89c38ba2834d84ab86d800790c709d22cb66e4fca5edda42752363956324f8066d08e3b1d81c50ac879d2749068655
DIST microcode-20260227.tar.gz 16621772 BLAKE2B 3725dee3af32b545a754a47616c7451a6e7e227af125a8eb35729b2784dfbdecccea6054e1f3190119253041697ce525380e5a98c929e42a4294028d2eca1ebd SHA512 d9de41b1f1b2740d12f0e9e4987b8001d7b9a0ae53382e9bd715936fb7cab7da74a9154df781950738db1c1ebb9ad4f46700355b67a0fb4e8fd5e80711702723
DIST microcode-20260512.tar.gz 16949219 BLAKE2B 10407aa08481998fb5102bbf517b1cf5c083d16fae8468d25ad2c6ad4b6a665c520cb35f22a44b1f2b385232694bd18b1ee2e75a46658dcdafe40c0c54562c07 SHA512 b6e2e9fb3fe19cd46fcbcd639d16e2348b812eac2bcc535fb839d226218e1cbc724fc49c0d81acf606a22b719ff43ed5b46304fba65ef0ba663290df822649b8
DIST microcode-20260811.tar.gz 17588431 BLAKE2B b774544cc705345bf2cef106572b688d0c5f29e72d83bfdac2873ae423df4b5ee7540993aea05c0151049e21ff0a479fb3cc9d07fc1b3f0a4ac65296bc8873dc SHA512 0311bfb15ef24804009d574cd5cd1e1816a56af34f0e9bcec20d3f9c6112c938cbcf237fec896a4b30fae52a7ce528ea932894d2a15b962ceb613a3dc4dd6c96
+DIST microcode-20260812.tar.gz 17588545 BLAKE2B a8353ebad790c00820614a78814dc39987d5c8ad815de4eda9a92cdd8ed93047474b4ac38953ef4ca9aa05c07d1e318143b4b97a6e3eba40e72b83911eddafba SHA512 847935813453368ba890839e422a71912a8f53cc1256cd6800849976b58929d8415641d521ab3a7523262e0ef76058fb5db228f68e467424d45846d0f1ab2ebc
diff --git a/sys-firmware/intel-microcode/intel-microcode-20260812_p20260813.ebuild b/sys-firmware/intel-microcode/intel-microcode-20260812_p20260813.ebuild
new file mode 100644
index 000000000000..3d84a3457028
--- /dev/null
+++ b/sys-firmware/intel-microcode/intel-microcode-20260812_p20260813.ebuild
@@ -0,0 +1,340 @@
+# Copyright 1999-2026 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=8
+
+inherit dist-kernel-utils linux-info mount-boot
+
+# Find updates by searching and clicking the first link (hopefully it's the one):
+# https://www.intel.com/content/www/us/en/search.html?keyword=Processor+Microcode+Data+File
+#
+#
+# Package Maintenance instructions:
+# 1. The ebuild is in the form of intel-microcode-<INTEL_SNAPSHOT>_p<COLLECTION_SNAPSHOT>.ebuild
+# 2. The INTEL_SNAPSHOT upstream is located at: https://github.com/intel/Intel-Linux-Processor-Microcode-Data-Files
+# 3. The COLLECTION_SNAPSHOT is created manually using the following steps:
+# a. Clone the repository https://github.com/platomav/CPUMicrocodes
+# b. Rename the Intel directory to intel-microcode-collection-<YYYYMMDD>
+# c. From the CPUMicrocodes directory tar and xz compress the contents of intel-microcode-collection-<YYYYMMDD>:
+# tar -cJf intel-microcode-collection-<YYYYMMDD>.tar.xz intel-microcode-collection-<YYYYMMDD>/
+# d. This file should be signed and uploaded to masterkup. For detailed instructions, please go to: https://wiki.gentoo.org/wiki/Project:Infrastructure/Project_Distfiles
+# e. The SRC_URI will then be of the form:
+# https://distfiles.gentoo.org/pub/proj/intel-microcode/intel-microcode-collection-${COLLECTION_SNAPSHOT}.tar.xz
+#
+# PV:
+# * the first date is upstream
+# * the second date is snapshot (use last commit date in repo) from intel-microcode-collection
+
+COLLECTION_SNAPSHOT="${PV##*_p}"
+INTEL_SNAPSHOT="${PV/_p*}"
+#NUM="28087"
+
+#https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=${NUM}
+#https://downloadmirror.intel.com/${NUM}/eng/microcode-${INTEL_SNAPSHOT}.tgz
+
+DESCRIPTION="Intel IA32/IA64 microcode update data"
+HOMEPAGE="https://github.com/intel/Intel-Linux-Processor-Microcode-Data-Files https://github.com/platomav/CPUMicrocodes http://inertiawar.com/microcode/"
+SRC_URI="
+ https://github.com/intel/Intel-Linux-Processor-Microcode-Data-Files/archive/microcode-${INTEL_SNAPSHOT}.tar.gz
+ https://github.com/intel/Intel-Linux-Processor-Microcode-Data-Files/raw/437f382b1be4412b9d03e2bbdcda46d83d581242/intel-ucode/06-4e-03 -> intel-ucode-sig_0x406e3-rev_0xd6.bin
+ https://dev.gentoo.org/~mpagano/dist/intel-microcode/intel-microcode-collection-${COLLECTION_SNAPSHOT}.tar.xz
+ https://dev.gentoo.org/~sam/distfiles/${CATEGORY}/${PN}/intel-microcode-collection-${COLLECTION_SNAPSHOT}.tar.xz
+ https://distfiles.gentoo.org/pub/proj/intel-microcode/intel-microcode-collection-${COLLECTION_SNAPSHOT}.tar.xz
+"
+S="${WORKDIR}"
+
+LICENSE="intel-ucode"
+SLOT="0"
+KEYWORDS="-* ~amd64 ~x86"
+IUSE="dist-kernel hostonly +initramfs +split-ucode vanilla"
+REQUIRED_USE="
+ || ( initramfs split-ucode )
+ dist-kernel? ( split-ucode )
+"
+RESTRICT="binchecks strip"
+
+BDEPEND=">=sys-apps/iucode_tool-2.3"
+# !<sys-apps/microcode-ctl-1.17-r2 due to bug #268586
+RDEPEND="
+ dist-kernel? (
+ virtual/dist-kernel
+ initramfs? (
+ sys-apps/iucode_tool
+ )
+ )
+"
+IDEPEND="
+ hostonly? ( sys-apps/iucode_tool )
+ dist-kernel? (
+ initramfs? ( sys-kernel/installkernel )
+ )
+"
+
+# Blacklist bad microcode here.
+# 0x000406f1 aka 06-4f-01 aka CPUID 406F1 require newer microcode loader
+MICROCODE_BLACKLIST_DEFAULT="-s !0x000406f1"
+
+# https://github.com/intel/Intel-Linux-Processor-Microcode-Data-Files/issues/31
+MICROCODE_BLACKLIST_DEFAULT+=" -s !0x000406e3,0xc0,eq:0x00dc"
+
+# https://bugs.gentoo.org/722768
+MICROCODE_BLACKLIST_DEFAULT+=" -s !0x000406e3,0xc0,eq:0x00da"
+
+# https://github.com/intel/Intel-Linux-Processor-Microcode-Data-Files/commit/49bb67f32a2e3e631ba1a9a73da1c52e1cac7fd9
+MICROCODE_BLACKLIST_DEFAULT+=" -s !0x000806c1,0x80,eq:0x0068"
+
+# In case we want to set some defaults ...
+MICROCODE_SIGNATURES_DEFAULT=""
+
+# Advanced users only!
+# Set MIRCOCODE_SIGNATURES to merge with:
+# only current CPU: MICROCODE_SIGNATURES="-S"
+# only specific CPU: MICROCODE_SIGNATURES="-s 0x00000f4a -s 0x00010676"
+# exclude specific CPU: MICROCODE_SIGNATURES="-s !0x00000686"
+
+pkg_pretend() {
+ if use initramfs; then
+ if use dist-kernel; then
+ # Check, but don't die because we can fix the problem and then
+ # emerge --config ... to re-run installation.
+ nonfatal mount-boot_check_status
+ else
+ mount-boot_pkg_pretend
+ fi
+ fi
+}
+
+src_prepare() {
+ default
+
+ if cd Intel-Linux-Processor-Microcode-Data* &>/dev/null; then
+ # new tarball format from GitHub
+ mv * ../ || die "Failed to move Intel-Linux-Processor-Microcode-Data*"
+ cd .. || die
+ rm -r Intel-Linux-Processor-Microcode-Data* || die
+ fi
+
+ mkdir intel-ucode-old || die
+ cp "${DISTDIR}"/intel-ucode-sig_0x406e3-rev_0xd6.bin "${S}"/intel-ucode-old/ || die
+
+ # Prevent "invalid file format" errors from iucode_tool
+ rm -f "${S}"/intel-ucod*/list || die
+
+ # https://gitlab.com/iucode-tool/iucode-tool/-/issues/4
+ rm "${S}"/intel-microcode-collection-${COLLECTION_SNAPSHOT}/cpu106C0_plat01_ver00000007_2007-08-24_PRD_923CDFA3.bin || die
+
+ # Remove non-microcode file from list
+ rm -f "${S}"/intel-microcode-collection-${COLLECTION_SNAPSHOT}/LICENSE || die
+ rm -f "${S}"/intel-ucode*/LICENSE || die
+}
+
+src_install() {
+ # This will take ALL of the upstream microcode sources:
+ # - microcode.dat
+ # - intel-ucode/
+ # In some cases, they have not contained the same content (eg the directory has newer stuff).
+ MICROCODE_SRC=(
+ "${S}"/intel-ucode/
+ "${S}"/intel-ucode-with-caveats/
+ "${S}"/intel-ucode-old/
+ )
+
+ # Allow users who are scared about microcode updates not included in Intel's official
+ # microcode tarball to opt-out and comply with Intel marketing
+ if ! use vanilla; then
+ MICROCODE_SRC+=( "${S}"/intel-microcode-collection-${COLLECTION_SNAPSHOT} )
+ fi
+
+ # These will carry into pkg_preinst via env saving.
+ : ${MICROCODE_BLACKLIST=${MICROCODE_BLACKLIST_DEFAULT}}
+ : ${MICROCODE_SIGNATURES=${MICROCODE_SIGNATUES_DEFAULT}}
+
+ opts=(
+ ${MICROCODE_BLACKLIST}
+ ${MICROCODE_SIGNATURES}
+ # be strict about what we are doing
+ --overwrite
+ --strict-checks
+ --no-ignore-broken
+ # we want to install latest version
+ --no-downgrade
+ # show everything we find
+ --list-all
+ # show what we selected
+ --list
+ )
+
+ # Instruct Dracut on whether or not we want the microcode in initramfs
+ # Use here 15 instead of 10, intel-microcode overwrites linux-firmware
+ (
+ insinto /usr/lib/dracut/dracut.conf.d
+ newins - 15-${PN}.conf <<<"early_microcode=$(usex initramfs)"
+ )
+ if use initramfs; then
+ # Install installkernel/kernel-install hooks for non-dracut initramfs
+ # generators that don't bundled the microcode
+ (
+ exeinto /usr/lib/kernel/preinst.d
+ doexe "${FILESDIR}/35-intel-microcode.install"
+ exeinto /usr/lib/kernel/install.d
+ doexe "${FILESDIR}/35-intel-microcode-systemd.install"
+ )
+ fi
+
+ # The earlyfw cpio needs to be in /boot because it must be loaded before
+ # rootfs is mounted.
+ if ! use dist-kernel && use initramfs; then
+ dodir /boot && opts+=( --write-earlyfw="${ED}/boot/intel-uc.img" )
+ fi
+
+ keepdir /lib/firmware/intel-ucode
+ opts+=( --write-firmware="${ED}/lib/firmware/intel-ucode" )
+
+ iucode_tool \
+ "${opts[@]}" \
+ "${MICROCODE_SRC[@]}" \
+ || die "iucode_tool ${opts[@]} ${MICROCODE_SRC[@]}"
+
+ dodoc releasenote.md
+}
+
+pkg_preinst() {
+ if [[ ${MICROCODE_BLACKLIST} != ${MICROCODE_BLACKLIST_DEFAULT} ]]; then
+ ewarn "MICROCODE_BLACKLIST is set to \"${MICROCODE_BLACKLIST}\" instead of default \"${MICROCODE_BLACKLIST_DEFAULT}\". You are on your own!"
+ fi
+
+ if [[ ${MICROCODE_SIGNATURES} != ${MICROCODE_SIGNATURES_DEFAULT} ]]; then
+ ewarn "Package was created using advanced options:"
+ ewarn "MICROCODE_SIGNATURES is set to \"${MICROCODE_SIGNATURES}\" instead of default \"${MICROCODE_SIGNATURES_DEFAULT}\"!"
+ fi
+
+ # Make sure /boot is available if needed.
+ use initramfs && ! use dist-kernel && mount-boot_pkg_preinst
+
+ local _initramfs_file="${ED}/boot/intel-uc.img"
+
+ if use hostonly; then
+ # While this output looks redundant we do this check to detect
+ # rare cases where iucode_tool was unable to detect system's processor(s).
+ local _detected_processors=$(iucode_tool --scan-system 2>&1)
+ if [[ -z "${_detected_processors}" ]]; then
+ ewarn "Looks like iucode_tool was unable to detect any processor!"
+ else
+ einfo "Only installing ucode(s) for ${_detected_processors#iucode_tool: system has } due to USE=hostonly ..."
+ fi
+
+ opts=(
+ --scan-system
+ # be strict about what we are doing
+ --overwrite
+ --strict-checks
+ --no-ignore-broken
+ # we want to install latest version
+ --no-downgrade
+ # show everything we find
+ --list-all
+ # show what we selected
+ --list
+ )
+
+ # The earlyfw cpio needs to be in /boot because it must be loaded before
+ # rootfs is mounted.
+ if ! use dist-kernel && use initramfs; then
+ opts+=( --write-earlyfw=${_initramfs_file} )
+ fi
+
+ if use split-ucode; then
+ opts+=( --write-firmware="${ED}/lib/firmware/intel-ucode" )
+ fi
+
+ opts+=( "${ED}/lib/firmware/intel-ucode-temp" )
+
+ mv "${ED}"/lib/firmware/intel-ucode{,-temp} || die
+ keepdir /lib/firmware/intel-ucode
+
+ iucode_tool "${opts[@]}" || die "iucode_tool ${opts[@]}"
+
+ rm -r "${ED}"/lib/firmware/intel-ucode-temp || die
+
+ elif ! use split-ucode; then # hostonly disabled
+ rm -r "${ED}"/lib/firmware/intel-ucode || die
+ fi
+
+ # Because it is possible that this package will install not one single file
+ # due to user selection which is still somehow unexpected we add the following
+ # check to inform user so that the user has at least a chance to detect
+ # a problem/invalid select.
+ local _has_installed_something=
+ if use initramfs && [[ -s "${_initramfs_file}" ]]; then
+ _has_installed_something="yes"
+ elif use split-ucode; then
+ _has_installed_something=$(find "${ED}/lib/firmware/intel-ucode" -maxdepth 0 -not -empty -exec echo yes \;)
+ fi
+
+ if use hostonly && [[ -n "${_has_installed_something}" ]]; then
+ elog "You only installed ucode(s) for all currently available (=online)"
+ elog "processor(s). Remember to re-emerge this package whenever you"
+ elog "change the system's processor model."
+ elog ""
+ elif [[ -z "${_has_installed_something}" ]]; then
+ ewarn "WARNING:"
+ if [[ ${MICROCODE_SIGNATURES} != ${MICROCODE_SIGNATURES_DEFAULT} ]]; then
+ ewarn "No ucode was installed! Because you have created this package"
+ ewarn "using MICROCODE_SIGNATURES variable please double check if you"
+ ewarn "have an invalid select."
+ ewarn "It's rare but it is also possible that just no ucode update"
+ ewarn "is available for your processor(s). In this case it is safe"
+ ewarn "to ignore this warning."
+ else
+ ewarn "No ucode was installed! It's rare but it is also possible"
+ ewarn "that just no ucode update is available for your processor(s)."
+ ewarn "In this case it is safe to ignore this warning."
+ fi
+
+ ewarn ""
+
+ if use hostonly; then
+ ewarn "Unset \"hostonly\" USE flag to install all available ucodes."
+ ewarn ""
+ fi
+ fi
+}
+
+pkg_prerm() {
+ # Make sure /boot is mounted so that we can remove /boot/intel-uc.img!
+ use initramfs && ! use dist-kernel && mount-boot_pkg_prerm
+}
+
+pkg_postrm() {
+ # Don't forget to umount /boot if it was previously mounted by us.
+ use initramfs && ! use dist-kernel && mount-boot_pkg_postrm
+}
+
+pkg_postinst() {
+ if use initramfs; then
+ if use dist-kernel; then
+ dist-kernel_reinstall_initramfs "${KV_DIR}" "${KV_FULL}" --all
+ else
+ # Don't forget to umount /boot if it was previously mounted by us.
+ mount-boot_pkg_postinst
+ fi
+ fi
+
+ # We cannot give detailed information if user is affected or not:
+ # If MICROCODE_BLACKLIST wasn't modified, user can still use MICROCODE_SIGNATURES
+ # to to force a specific, otherwise blacklisted, microcode. So we
+ # only show a generic warning based on running kernel version:
+ if kernel_is -lt 4 14 34; then
+ ewarn "${P} contains microcode updates which require"
+ ewarn "additional kernel patches which aren't yet included in kernel <4.14.34."
+ ewarn "Loading such a microcode through kernel interface from an unpatched kernel"
+ ewarn "can crash your system!"
+ ewarn ""
+ ewarn "Those microcodes are blacklisted per default. However, if you have altered"
+ ewarn "MICROCODE_BLACKLIST or MICROCODE_SIGNATURES, you maybe have unintentionally"
+ ewarn "re-enabled those microcodes...!"
+ ewarn ""
+ ewarn "Check \"${EROOT}/usr/share/doc/${PN}-*/releasenot*\" if your microcode update"
+ ewarn "requires additional kernel patches or not."
+ fi
+}