[PATCH 43/94] sys-libs/glibc: minor adaptions for hurd
Sam James <[email protected]>
| Newsgroups | gmane.linux.gentoo.devel |
|---|---|
| Message-ID | <94c0211d7dbfb695eaffdad3e5365b96462defb0.1774994323.git.sam@gentoo.org> |
From: Andreas K. Hüttel <[email protected]> Signed-off-by: Andreas K. Hüttel <[email protected]> Signed-off-by: Sam James <[email protected]> --- sys-libs/glibc/glibc-2.43.ebuild | 138 ++++++++++++++++++------------- sys-libs/glibc/glibc-9999.ebuild | 138 ++++++++++++++++++------------- 2 files changed, 158 insertions(+), 118 deletions(-) diff --git a/sys-libs/glibc/glibc-2.43.ebuild b/sys-libs/glibc/glibc-2.43.ebuild index 24e1efff24c14..a84ae1e4630b3 100644 --- a/sys-libs/glibc/glibc-2.43.ebuild +++ b/sys-libs/glibc/glibc-2.43.ebuild @@ -257,6 +257,15 @@ is_crosscompile() { [[ ${CHOST} != ${CTARGET} ]] } +is_linux() { + [[ ${CTARGET} == *-linux-* ]] +} + +is_hurd() { + # Let's hope this holds for a long time + [[ ${CTARGET} != *-linux-* ]] +} + just_headers() { is_crosscompile && use headers-only } @@ -1478,47 +1487,56 @@ glibc_do_src_install() { # if the main library set isn't installed into the right place. Maybe # we should query the active gcc for info instead of hardcoding it ? local i ldso_abi ldso_name - local ldso_abi_list=( - # x86 - amd64 /lib64/ld-linux-x86-64.so.2 - x32 /libx32/ld-linux-x32.so.2 - x86 /lib/ld-linux.so.2 - # mips - o32 /lib/ld.so.1 - n32 /lib32/ld.so.1 - n64 /lib64/ld.so.1 - # powerpc - ppc /lib/ld.so.1 - # riscv - ilp32d /lib/ld-linux-riscv32-ilp32d.so.1 - ilp32 /lib/ld-linux-riscv32-ilp32.so.1 - lp64d /lib/ld-linux-riscv64-lp64d.so.1 - lp64 /lib/ld-linux-riscv64-lp64.so.1 - # s390 - s390 /lib/ld.so.1 - s390x /lib/ld64.so.1 - # sparc - sparc32 /lib/ld-linux.so.2 - sparc64 /lib64/ld-linux.so.2 - ) - case $(tc-endian) in - little) - ldso_abi_list+=( - # arm - arm64 /lib/ld-linux-aarch64.so.1 - # ELFv2 (glibc does not support ELFv1 on LE) - ppc64 /lib64/ld64.so.2 + if is_linux ; then + local ldso_abi_list=( + # x86 + amd64 /lib64/ld-linux-x86-64.so.2 + x32 /libx32/ld-linux-x32.so.2 + x86 /lib/ld-linux.so.2 + # mips + o32 /lib/ld.so.1 + n32 /lib32/ld.so.1 + n64 /lib64/ld.so.1 + # powerpc + ppc /lib/ld.so.1 + # riscv + ilp32d /lib/ld-linux-riscv32-ilp32d.so.1 + ilp32 /lib/ld-linux-riscv32-ilp32.so.1 + lp64d /lib/ld-linux-riscv64-lp64d.so.1 + lp64 /lib/ld-linux-riscv64-lp64.so.1 + # s390 + s390 /lib/ld.so.1 + s390x /lib/ld64.so.1 + # sparc + sparc32 /lib/ld-linux.so.2 + sparc64 /lib64/ld-linux.so.2 ) - ;; - big) - ldso_abi_list+=( - # arm - arm64 /lib/ld-linux-aarch64_be.so.1 - # ELFv1 (glibc does not support ELFv2 on BE) - ppc64 /lib64/ld64.so.1 + case $(tc-endian) in + little) + ldso_abi_list+=( + # arm + arm64 /lib/ld-linux-aarch64.so.1 + # ELFv2 (glibc does not support ELFv1 on LE) + ppc64 /lib64/ld64.so.2 + ) + ;; + big) + ldso_abi_list+=( + # arm + arm64 /lib/ld-linux-aarch64_be.so.1 + # ELFv1 (glibc does not support ELFv2 on BE) + ppc64 /lib64/ld64.so.1 + ) + ;; + esac + else + # we must be using hurd then + local ldso_abi_list=( + # x86 + amd64 /lib64/ld-x86-64.so.1 + x86 /lib/ld.so ) - ;; - esac + fi if [[ ${SYMLINK_LIB} == "yes" ]] && [[ ! -e ${ED}/$(alt_prefix)/lib ]] ; then dosym $(get_abi_LIBDIR ${DEFAULT_ABI}) $(alt_prefix)/lib fi @@ -1532,26 +1550,28 @@ glibc_do_src_install() { fi done - # In the LSB 5.0 definition, someone had the excellent idea to "standardize" - # the runtime loader name, see also https://xkcd.com/927/ - # Normally, in Gentoo one should never come across executables that require this. - # However, binary commercial packages are known to adhere to weird practices. - # https://refspecs.linuxfoundation.org/LSB_5.0.0/LSB-Core-AMD64/LSB-Core-AMD64.html#BASELIB - local lsb_ldso_name native_ldso_name lsb_ldso_abi - local lsb_ldso_abi_list=( - # x86 - amd64 ld-linux-x86-64.so.2 ld-lsb-x86-64.so.3 - ) - for (( i = 0; i < ${#lsb_ldso_abi_list[@]}; i += 3 )) ; do - lsb_ldso_abi=${lsb_ldso_abi_list[i]} - native_ldso_name=${lsb_ldso_abi_list[i+1]} - lsb_ldso_name=${lsb_ldso_abi_list[i+2]} - has ${lsb_ldso_abi} $(get_install_abis) || continue - - if [[ ! -L ${ED}/$(get_abi_LIBDIR ${lsb_ldso_abi})/${lsb_ldso_name} && ! -e ${ED}/$(get_abi_LIBDIR ${lsb_ldso_abi})/${lsb_ldso_name} ]] ; then - dosym ${native_ldso_name} "$(alt_prefix)/$(get_abi_LIBDIR ${lsb_ldso_abi})/${lsb_ldso_name}" - fi - done + if is_linux ; then + # In the LSB 5.0 definition, someone had the excellent idea to "standardize" + # the runtime loader name, see also https://xkcd.com/927/ + # Normally, in Gentoo one should never come across executables that require this. + # However, binary commercial packages are known to adhere to weird practices. + # https://refspecs.linuxfoundation.org/LSB_5.0.0/LSB-Core-AMD64/LSB-Core-AMD64.html#BASELIB + local lsb_ldso_name native_ldso_name lsb_ldso_abi + local lsb_ldso_abi_list=( + # x86 + amd64 ld-linux-x86-64.so.2 ld-lsb-x86-64.so.3 + ) + for (( i = 0; i < ${#lsb_ldso_abi_list[@]}; i += 3 )) ; do + lsb_ldso_abi=${lsb_ldso_abi_list[i]} + native_ldso_name=${lsb_ldso_abi_list[i+1]} + lsb_ldso_name=${lsb_ldso_abi_list[i+2]} + has ${lsb_ldso_abi} $(get_install_abis) || continue + + if [[ ! -L ${ED}/$(get_abi_LIBDIR ${lsb_ldso_abi})/${lsb_ldso_name} && ! -e ${ED}/$(get_abi_LIBDIR ${lsb_ldso_abi})/${lsb_ldso_name} ]] ; then + dosym ${native_ldso_name} "$(alt_prefix)/$(get_abi_LIBDIR ${lsb_ldso_abi})/${lsb_ldso_name}" + fi + done + fi # With devpts under Linux mounted properly, we do not need the pt_chown # binary to be setuid. This is because the default owners/perms will be diff --git a/sys-libs/glibc/glibc-9999.ebuild b/sys-libs/glibc/glibc-9999.ebuild index 86c64885f0080..9e678b1a7ec81 100644 --- a/sys-libs/glibc/glibc-9999.ebuild +++ b/sys-libs/glibc/glibc-9999.ebuild @@ -257,6 +257,15 @@ is_crosscompile() { [[ ${CHOST} != ${CTARGET} ]] } +is_linux() { + [[ ${CTARGET} == *-linux-* ]] +} + +is_hurd() { + # Let's hope this holds for a long time + [[ ${CTARGET} != *-linux-* ]] +} + just_headers() { is_crosscompile && use headers-only } @@ -1478,47 +1487,56 @@ glibc_do_src_install() { # if the main library set isn't installed into the right place. Maybe # we should query the active gcc for info instead of hardcoding it ? local i ldso_abi ldso_name - local ldso_abi_list=( - # x86 - amd64 /lib64/ld-linux-x86-64.so.2 - x32 /libx32/ld-linux-x32.so.2 - x86 /lib/ld-linux.so.2 - # mips - o32 /lib/ld.so.1 - n32 /lib32/ld.so.1 - n64 /lib64/ld.so.1 - # powerpc - ppc /lib/ld.so.1 - # riscv - ilp32d /lib/ld-linux-riscv32-ilp32d.so.1 - ilp32 /lib/ld-linux-riscv32-ilp32.so.1 - lp64d /lib/ld-linux-riscv64-lp64d.so.1 - lp64 /lib/ld-linux-riscv64-lp64.so.1 - # s390 - s390 /lib/ld.so.1 - s390x /lib/ld64.so.1 - # sparc - sparc32 /lib/ld-linux.so.2 - sparc64 /lib64/ld-linux.so.2 - ) - case $(tc-endian) in - little) - ldso_abi_list+=( - # arm - arm64 /lib/ld-linux-aarch64.so.1 - # ELFv2 (glibc does not support ELFv1 on LE) - ppc64 /lib64/ld64.so.2 + if is_linux ; then + local ldso_abi_list=( + # x86 + amd64 /lib64/ld-linux-x86-64.so.2 + x32 /libx32/ld-linux-x32.so.2 + x86 /lib/ld-linux.so.2 + # mips + o32 /lib/ld.so.1 + n32 /lib32/ld.so.1 + n64 /lib64/ld.so.1 + # powerpc + ppc /lib/ld.so.1 + # riscv + ilp32d /lib/ld-linux-riscv32-ilp32d.so.1 + ilp32 /lib/ld-linux-riscv32-ilp32.so.1 + lp64d /lib/ld-linux-riscv64-lp64d.so.1 + lp64 /lib/ld-linux-riscv64-lp64.so.1 + # s390 + s390 /lib/ld.so.1 + s390x /lib/ld64.so.1 + # sparc + sparc32 /lib/ld-linux.so.2 + sparc64 /lib64/ld-linux.so.2 ) - ;; - big) - ldso_abi_list+=( - # arm - arm64 /lib/ld-linux-aarch64_be.so.1 - # ELFv1 (glibc does not support ELFv2 on BE) - ppc64 /lib64/ld64.so.1 + case $(tc-endian) in + little) + ldso_abi_list+=( + # arm + arm64 /lib/ld-linux-aarch64.so.1 + # ELFv2 (glibc does not support ELFv1 on LE) + ppc64 /lib64/ld64.so.2 + ) + ;; + big) + ldso_abi_list+=( + # arm + arm64 /lib/ld-linux-aarch64_be.so.1 + # ELFv1 (glibc does not support ELFv2 on BE) + ppc64 /lib64/ld64.so.1 + ) + ;; + esac + else + # we must be using hurd then + local ldso_abi_list=( + # x86 + amd64 /lib64/ld-x86-64.so.1 + x86 /lib/ld.so ) - ;; - esac + fi if [[ ${SYMLINK_LIB} == "yes" ]] && [[ ! -e ${ED}/$(alt_prefix)/lib ]] ; then dosym $(get_abi_LIBDIR ${DEFAULT_ABI}) $(alt_prefix)/lib fi @@ -1532,26 +1550,28 @@ glibc_do_src_install() { fi done - # In the LSB 5.0 definition, someone had the excellent idea to "standardize" - # the runtime loader name, see also https://xkcd.com/927/ - # Normally, in Gentoo one should never come across executables that require this. - # However, binary commercial packages are known to adhere to weird practices. - # https://refspecs.linuxfoundation.org/LSB_5.0.0/LSB-Core-AMD64/LSB-Core-AMD64.html#BASELIB - local lsb_ldso_name native_ldso_name lsb_ldso_abi - local lsb_ldso_abi_list=( - # x86 - amd64 ld-linux-x86-64.so.2 ld-lsb-x86-64.so.3 - ) - for (( i = 0; i < ${#lsb_ldso_abi_list[@]}; i += 3 )) ; do - lsb_ldso_abi=${lsb_ldso_abi_list[i]} - native_ldso_name=${lsb_ldso_abi_list[i+1]} - lsb_ldso_name=${lsb_ldso_abi_list[i+2]} - has ${lsb_ldso_abi} $(get_install_abis) || continue - - if [[ ! -L ${ED}/$(get_abi_LIBDIR ${lsb_ldso_abi})/${lsb_ldso_name} && ! -e ${ED}/$(get_abi_LIBDIR ${lsb_ldso_abi})/${lsb_ldso_name} ]] ; then - dosym ${native_ldso_name} "$(alt_prefix)/$(get_abi_LIBDIR ${lsb_ldso_abi})/${lsb_ldso_name}" - fi - done + if is_linux ; then + # In the LSB 5.0 definition, someone had the excellent idea to "standardize" + # the runtime loader name, see also https://xkcd.com/927/ + # Normally, in Gentoo one should never come across executables that require this. + # However, binary commercial packages are known to adhere to weird practices. + # https://refspecs.linuxfoundation.org/LSB_5.0.0/LSB-Core-AMD64/LSB-Core-AMD64.html#BASELIB + local lsb_ldso_name native_ldso_name lsb_ldso_abi + local lsb_ldso_abi_list=( + # x86 + amd64 ld-linux-x86-64.so.2 ld-lsb-x86-64.so.3 + ) + for (( i = 0; i < ${#lsb_ldso_abi_list[@]}; i += 3 )) ; do + lsb_ldso_abi=${lsb_ldso_abi_list[i]} + native_ldso_name=${lsb_ldso_abi_list[i+1]} + lsb_ldso_name=${lsb_ldso_abi_list[i+2]} + has ${lsb_ldso_abi} $(get_install_abis) || continue + + if [[ ! -L ${ED}/$(get_abi_LIBDIR ${lsb_ldso_abi})/${lsb_ldso_name} && ! -e ${ED}/$(get_abi_LIBDIR ${lsb_ldso_abi})/${lsb_ldso_name} ]] ; then + dosym ${native_ldso_name} "$(alt_prefix)/$(get_abi_LIBDIR ${lsb_ldso_abi})/${lsb_ldso_name}" + fi + done + fi # With devpts under Linux mounted properly, we do not need the pt_chown # binary to be setuid. This is because the default owners/perms will be -- 2.53.0