[PATCH v4 3/5] sec-policy/selinux-base: update EAPI 7 -> 8
Rahul Sandhu <[email protected]>
| Newsgroups | gmane.linux.gentoo.devel |
|---|---|
| Message-ID | <[email protected]> |
Signed-off-by: Rahul Sandhu <[email protected]> --- .../selinux-base-2.20250213-r1.ebuild | 158 ----------------- .../selinux-base-2.20250213_p1.ebuild | 162 ++++++++++++++++++ .../selinux-base-2.20250618-r1.ebuild | 158 ----------------- .../selinux-base-2.20250618_p1.ebuild | 162 ++++++++++++++++++ .../selinux-base/selinux-base-9999.ebuild | 132 +++++++------- 5 files changed, 392 insertions(+), 380 deletions(-) delete mode 100644 sec-policy/selinux-base/selinux-base-2.20250213-r1.ebuild create mode 100644 sec-policy/selinux-base/selinux-base-2.20250213_p1.ebuild delete mode 100644 sec-policy/selinux-base/selinux-base-2.20250618-r1.ebuild create mode 100644 sec-policy/selinux-base/selinux-base-2.20250618_p1.ebuild diff --git a/sec-policy/selinux-base/selinux-base-2.20250213-r1.ebuild b/sec-policy/selinux-base/selinux-base-2.20250213-r1.ebuild deleted file mode 100644 index b3edd7c628f0..000000000000 --- a/sec-policy/selinux-base/selinux-base-2.20250213-r1.ebuild +++ /dev/null @@ -1,158 +0,0 @@ -# Copyright 1999-2025 Gentoo Authors -# Distributed under the terms of the GNU General Public License v2 - -EAPI="7" - -PYTHON_COMPAT=( python3_{10..12} ) -PYTHON_REQ_USE="xml(+)" -inherit python-any-r1 - -if [[ ${PV} == 9999* ]]; then - EGIT_REPO_URI="${SELINUX_GIT_REPO:-https://anongit.gentoo.org/git/proj/hardened-refpolicy.git}" - EGIT_BRANCH="${SELINUX_GIT_BRANCH:-master}" - EGIT_CHECKOUT_DIR="${WORKDIR}/refpolicy" - - inherit git-r3 -else - SRC_URI="https://github.com/SELinuxProject/refpolicy/releases/download/RELEASE_${PV/./_}/refpolicy-${PV}.tar.bz2 - https://dev.gentoo.org/~perfinion/patches/selinux-base-policy/patchbundle-selinux-base-policy-${PVR}.tar.bz2" - - KEYWORDS="amd64 arm arm64 ~riscv x86" -fi - -IUSE="doc +unknown-perms systemd +ubac +unconfined" - -DESCRIPTION="Gentoo base policy for SELinux" -HOMEPAGE="https://wiki.gentoo.org/wiki/Project:SELinux" -LICENSE="GPL-2" -SLOT="0" - -RDEPEND=">=sys-apps/policycoreutils-2.8" -DEPEND="${RDEPEND}" -BDEPEND=" - ${PYTHON_DEPS} - >=sys-apps/checkpolicy-2.8 - sys-devel/m4" - -S=${WORKDIR}/ - -src_prepare() { - if [[ ${PV} != 9999* ]]; then - einfo "Applying SELinux policy updates ... " - eapply -p0 "${WORKDIR}/0001-full-patch-against-stable-release.patch" - fi - - eapply_user - - cd "${S}/refpolicy" || die - emake bare -} - -src_configure() { - [ -z "${POLICY_TYPES}" ] && local POLICY_TYPES="targeted strict mls mcs" - - # Update the SELinux refpolicy capabilities based on the users' USE flags. - if use unknown-perms; then - sed -i -e '/^UNK_PERMS/s/deny/allow/' "${S}/refpolicy/build.conf" \ - || die "Failed to allow Unknown Permissions Handling" - sed -i -e '/^UNK_PERMS/s/deny/allow/' "${S}/refpolicy/Makefile" \ - || die "Failed to allow Unknown Permissions Handling" - fi - - if ! use ubac; then - sed -i -e '/^UBAC/s/y/n/' "${S}/refpolicy/build.conf" \ - || die "Failed to disable User Based Access Control" - fi - - if use systemd; then - sed -i -e '/^SYSTEMD/s/n/y/' "${S}/refpolicy/build.conf" \ - || die "Failed to enable SystemD" - fi - - echo "DISTRO = gentoo" >> "${S}/refpolicy/build.conf" || die - - # Prepare initial configuration - cd "${S}/refpolicy" || die - emake conf - - # Setup the policies based on the types delivered by the end user. - # These types can be "targeted", "strict", "mcs" and "mls". - for i in ${POLICY_TYPES}; do - cp -a "${S}/refpolicy" "${S}/${i}" || die - cd "${S}/${i}" || die - - sed -i -e "/= module/d" "${S}/${i}/policy/modules.conf" || die - - sed -i -e '/^QUIET/s/n/y/' -e "/^NAME/s/refpolicy/$i/" \ - "${S}/${i}/build.conf" || die "build.conf setup failed." - - if [[ "${i}" == "mls" ]] || [[ "${i}" == "mcs" ]]; - then - # MCS/MLS require additional settings - sed -i -e "/^TYPE/s/standard/${i}/" "${S}/${i}/build.conf" \ - || die "failed to set type to mls" - fi - - if [ "${i}" == "targeted" ]; then - sed -i -e '/root/d' -e 's/user_u/unconfined_u/' \ - "${S}/${i}/config/appconfig-standard/seusers" \ - || die "targeted seusers setup failed." - fi - - if [ "${i}" != "targeted" ] && [ "${i}" != "strict" ] && use unconfined; then - sed -i -e '/root/d' -e 's/user_u/unconfined_u/' \ - "${S}/${i}/config/appconfig-${i}/seusers" \ - || die "policy seusers setup failed." - fi - done -} - -src_compile() { - [ -z "${POLICY_TYPES}" ] && local POLICY_TYPES="targeted strict mls mcs" - - for i in ${POLICY_TYPES}; do - cd "${S}/${i}" || die - emake base - if use doc; then - emake html - fi - done -} - -src_install() { - [ -z "${POLICY_TYPES}" ] && local POLICY_TYPES="targeted strict mls mcs" - - for i in ${POLICY_TYPES}; do - cd "${S}/${i}" || die - - emake DESTDIR="${D}" install - emake DESTDIR="${D}" install-headers - - echo "run_init_t" > "${D}/etc/selinux/${i}/contexts/run_init_type" || die - - echo "textrel_shlib_t" >> "${D}/etc/selinux/${i}/contexts/customizable_types" || die - - # libsemanage won't make this on its own - keepdir "/etc/selinux/${i}/policy" - - if use doc; then - docinto ${i}/html - dodoc -r doc/html/*; - fi - - insinto /usr/share/selinux/devel; - doins doc/policy.xml; - - done - - docinto / - dodoc doc/Makefile.example doc/example.{te,fc,if} - - doman man/man8/*.8; - - insinto /etc/selinux - doins "${FILESDIR}/config" - - insinto /usr/share/portage/config/sets - doins "${FILESDIR}/selinux.conf" -} diff --git a/sec-policy/selinux-base/selinux-base-2.20250213_p1.ebuild b/sec-policy/selinux-base/selinux-base-2.20250213_p1.ebuild new file mode 100644 index 000000000000..549705fab3f2 --- /dev/null +++ b/sec-policy/selinux-base/selinux-base-2.20250213_p1.ebuild @@ -0,0 +1,162 @@ +# Copyright 1999-2026 Gentoo Authors +# Distributed under the terms of the GNU General Public License v2 + +EAPI=8 + +PYTHON_COMPAT=( python3_{11..14} ) +PYTHON_REQ_USE="xml(+)" + +inherit python-any-r1 + +DESCRIPTION="Gentoo base policy for SELinux" +HOMEPAGE="https://wiki.gentoo.org/wiki/Project:SELinux" + +if [[ "${PV}" = 9999* ]]; then + EGIT_REPO_URI="${SELINUX_GIT_REPO:-https://anongit.gentoo.org/git/proj/hardened-refpolicy.git}" + EGIT_BRANCH="${SELINUX_GIT_BRANCH:-master}" + EGIT_CHECKOUT_DIR="${WORKDIR}/refpolicy" + + inherit git-r3 +else + MY_PV=$(ver_cut 1-2) + SRC_URI="https://github.com/SELinuxProject/refpolicy/releases/download/RELEASE_${MY_PV/./_}/refpolicy-${MY_PV}.tar.bz2 + https://dev.gentoo.org/~perfinion/patches/selinux-base-policy/patchbundle-selinux-base-policy-${PV/_p/-r}.tar.bz2" + KEYWORDS="amd64 arm arm64 ~riscv x86" +fi + +S="${WORKDIR}" + +LICENSE="GPL-2" +SLOT="0" +IUSE=" + doc +unknown-perms systemd +ubac +unconfined + +selinux_policy_types_targeted +selinux_policy_types_strict +selinux_policy_types_mcs +selinux_policy_types_mls +" +REQUIRED_USE=" + || ( selinux_policy_types_targeted selinux_policy_types_strict selinux_policy_types_mcs selinux_policy_types_mls ) +" + +RDEPEND=">=sys-apps/policycoreutils-2.8" +DEPEND="${RDEPEND}" +BDEPEND=" + ${PYTHON_DEPS} + >=sys-apps/checkpolicy-2.8 + sys-devel/m4 +" + +src_prepare() { + if [[ "${PV}" != 9999* ]]; then + einfo "Applying SELinux policy updates... " + eapply -p0 "${WORKDIR}/0001-full-patch-against-stable-release.patch" + fi + + eapply_user + + cd "${S}/refpolicy" || die + emake bare +} + +src_configure() { + # Update the SELinux refpolicy capabilities based on the users' USE flags. + if use unknown-perms; then + sed -i -e '/^UNK_PERMS/s/deny/allow/' "${S}/refpolicy/build.conf" \ + || die "Failed to allow Unknown Permissions Handling" + sed -i -e '/^UNK_PERMS/s/deny/allow/' "${S}/refpolicy/Makefile" \ + || die "Failed to allow Unknown Permissions Handling" + fi + + if ! use ubac; then + sed -i -e '/^UBAC/s/y/n/' "${S}/refpolicy/build.conf" \ + || die "Failed to disable User Based Access Control" + fi + + if use systemd; then + sed -i -e '/^SYSTEMD/s/n/y/' "${S}/refpolicy/build.conf" \ + || die "Failed to enable SystemD" + fi + + echo "DISTRO = gentoo" >> "${S}/refpolicy/build.conf" || die + + # Prepare initial configuration + cd "${S}/refpolicy" || die + emake conf + + # Setup the policies based on the types delivered by the end user. + # These types can be "targeted", "strict", "mcs" and "mls". + for type in targeted strict mcs mls; do + if use "selinux_policy_types_${type}"; then + cp -a "${S}/refpolicy" "${S}/${type}" || die + cd "${S}/${type}" || die + + sed -i -e "/= module/d" "${S}/${type}/policy/modules.conf" || die + + sed -i -e '/^QUIET/s/n/y/' -e "/^NAME/s/refpolicy/${type}/" \ + "${S}/${type}/build.conf" || die "build.conf setup failed." + + if [[ "${type}" = "mls" || "${type}" = "mcs" ]]; then + # MCS/MLS require additional settings + sed -i -e "/^TYPE/s/standard/${type}/" "${S}/${type}/build.conf" \ + || die "failed to set type to mls" + fi + + if [[ "${type}" = "targeted" ]]; then + sed -i -e '/root/d' -e 's/user_u/unconfined_u/' \ + "${S}/${type}/config/appconfig-standard/seusers" \ + || die "targeted seusers setup failed." + fi + + if [[ "${type}" != "targeted" && "${type}" != "strict" ]] && use unconfined; then + sed -i -e '/root/d' -e 's/user_u/unconfined_u/' \ + "${S}/${type}/config/appconfig-${type}/seusers" \ + || die "policy seusers setup failed." + fi + fi + done +} + +src_compile() { + for type in targeted strict mcs mls; do + if use "selinux_policy_types_${type}"; then + cd "${S}/${type}" || die + emake base + use doc && emake html + fi + done +} + +src_install() { + for type in targeted strict mcs mls; do + if use "selinux_policy_types_${type}"; then + cd "${S}/${type}" || die + + emake DESTDIR="${D}" install + emake DESTDIR="${D}" install-headers + + echo "run_init_t" > "${D}/etc/selinux/${type}/contexts/run_init_type" || die + + echo "textrel_shlib_t" >> "${D}/etc/selinux/${type}/contexts/customizable_types" || die + + # libsemanage won't make this on its own + keepdir "/etc/selinux/${type}/policy" + + if use doc; then + docinto "${type}/html" + dodoc -r doc/html/*; + fi + + insinto /usr/share/selinux/devel; + doins doc/policy.xml; + fi + done + + docinto / + dodoc doc/Makefile.example doc/example.{te,fc,if} + + doman man/man8/*.8; + + insinto /etc/selinux + doins "${FILESDIR}/config" + + insinto /usr/share/portage/config/sets + doins "${FILESDIR}/selinux.conf" +} diff --git a/sec-policy/selinux-base/selinux-base-2.20250618-r1.ebuild b/sec-policy/selinux-base/selinux-base-2.20250618-r1.ebuild deleted file mode 100644 index b3edd7c628f0..000000000000 --- a/sec-policy/selinux-base/selinux-base-2.20250618-r1.ebuild +++ /dev/null @@ -1,158 +0,0 @@ -# Copyright 1999-2025 Gentoo Authors -# Distributed under the terms of the GNU General Public License v2 - -EAPI="7" - -PYTHON_COMPAT=( python3_{10..12} ) -PYTHON_REQ_USE="xml(+)" -inherit python-any-r1 - -if [[ ${PV} == 9999* ]]; then - EGIT_REPO_URI="${SELINUX_GIT_REPO:-https://anongit.gentoo.org/git/proj/hardened-refpolicy.git}" - EGIT_BRANCH="${SELINUX_GIT_BRANCH:-master}" - EGIT_CHECKOUT_DIR="${WORKDIR}/refpolicy" - - inherit git-r3 -else - SRC_URI="https://github.com/SELinuxProject/refpolicy/releases/download/RELEASE_${PV/./_}/refpolicy-${PV}.tar.bz2 - https://dev.gentoo.org/~perfinion/patches/selinux-base-policy/patchbundle-selinux-base-policy-${PVR}.tar.bz2" - - KEYWORDS="amd64 arm arm64 ~riscv x86" -fi - -IUSE="doc +unknown-perms systemd +ubac +unconfined" - -DESCRIPTION="Gentoo base policy for SELinux" -HOMEPAGE="https://wiki.gentoo.org/wiki/Project:SELinux" -LICENSE="GPL-2" -SLOT="0" - -RDEPEND=">=sys-apps/policycoreutils-2.8" -DEPEND="${RDEPEND}" -BDEPEND=" - ${PYTHON_DEPS} - >=sys-apps/checkpolicy-2.8 - sys-devel/m4" - -S=${WORKDIR}/ - -src_prepare() { - if [[ ${PV} != 9999* ]]; then - einfo "Applying SELinux policy updates ... " - eapply -p0 "${WORKDIR}/0001-full-patch-against-stable-release.patch" - fi - - eapply_user - - cd "${S}/refpolicy" || die - emake bare -} - -src_configure() { - [ -z "${POLICY_TYPES}" ] && local POLICY_TYPES="targeted strict mls mcs" - - # Update the SELinux refpolicy capabilities based on the users' USE flags. - if use unknown-perms; then - sed -i -e '/^UNK_PERMS/s/deny/allow/' "${S}/refpolicy/build.conf" \ - || die "Failed to allow Unknown Permissions Handling" - sed -i -e '/^UNK_PERMS/s/deny/allow/' "${S}/refpolicy/Makefile" \ - || die "Failed to allow Unknown Permissions Handling" - fi - - if ! use ubac; then - sed -i -e '/^UBAC/s/y/n/' "${S}/refpolicy/build.conf" \ - || die "Failed to disable User Based Access Control" - fi - - if use systemd; then - sed -i -e '/^SYSTEMD/s/n/y/' "${S}/refpolicy/build.conf" \ - || die "Failed to enable SystemD" - fi - - echo "DISTRO = gentoo" >> "${S}/refpolicy/build.conf" || die - - # Prepare initial configuration - cd "${S}/refpolicy" || die - emake conf - - # Setup the policies based on the types delivered by the end user. - # These types can be "targeted", "strict", "mcs" and "mls". - for i in ${POLICY_TYPES}; do - cp -a "${S}/refpolicy" "${S}/${i}" || die - cd "${S}/${i}" || die - - sed -i -e "/= module/d" "${S}/${i}/policy/modules.conf" || die - - sed -i -e '/^QUIET/s/n/y/' -e "/^NAME/s/refpolicy/$i/" \ - "${S}/${i}/build.conf" || die "build.conf setup failed." - - if [[ "${i}" == "mls" ]] || [[ "${i}" == "mcs" ]]; - then - # MCS/MLS require additional settings - sed -i -e "/^TYPE/s/standard/${i}/" "${S}/${i}/build.conf" \ - || die "failed to set type to mls" - fi - - if [ "${i}" == "targeted" ]; then - sed -i -e '/root/d' -e 's/user_u/unconfined_u/' \ - "${S}/${i}/config/appconfig-standard/seusers" \ - || die "targeted seusers setup failed." - fi - - if [ "${i}" != "targeted" ] && [ "${i}" != "strict" ] && use unconfined; then - sed -i -e '/root/d' -e 's/user_u/unconfined_u/' \ - "${S}/${i}/config/appconfig-${i}/seusers" \ - || die "policy seusers setup failed." - fi - done -} - -src_compile() { - [ -z "${POLICY_TYPES}" ] && local POLICY_TYPES="targeted strict mls mcs" - - for i in ${POLICY_TYPES}; do - cd "${S}/${i}" || die - emake base - if use doc; then - emake html - fi - done -} - -src_install() { - [ -z "${POLICY_TYPES}" ] && local POLICY_TYPES="targeted strict mls mcs" - - for i in ${POLICY_TYPES}; do - cd "${S}/${i}" || die - - emake DESTDIR="${D}" install - emake DESTDIR="${D}" install-headers - - echo "run_init_t" > "${D}/etc/selinux/${i}/contexts/run_init_type" || die - - echo "textrel_shlib_t" >> "${D}/etc/selinux/${i}/contexts/customizable_types" || die - - # libsemanage won't make this on its own - keepdir "/etc/selinux/${i}/policy" - - if use doc; then - docinto ${i}/html - dodoc -r doc/html/*; - fi - - insinto /usr/share/selinux/devel; - doins doc/policy.xml; - - done - - docinto / - dodoc doc/Makefile.example doc/example.{te,fc,if} - - doman man/man8/*.8; - - insinto /etc/selinux - doins "${FILESDIR}/config" - - insinto /usr/share/portage/config/sets - doins "${FILESDIR}/selinux.conf" -} diff --git a/sec-policy/selinux-base/selinux-base-2.20250618_p1.ebuild b/sec-policy/selinux-base/selinux-base-2.20250618_p1.ebuild new file mode 100644 index 000000000000..549705fab3f2 --- /dev/null +++ b/sec-policy/selinux-base/selinux-base-2.20250618_p1.ebuild @@ -0,0 +1,162 @@ +# Copyright 1999-2026 Gentoo Authors +# Distributed under the terms of the GNU General Public License v2 + +EAPI=8 + +PYTHON_COMPAT=( python3_{11..14} ) +PYTHON_REQ_USE="xml(+)" + +inherit python-any-r1 + +DESCRIPTION="Gentoo base policy for SELinux" +HOMEPAGE="https://wiki.gentoo.org/wiki/Project:SELinux" + +if [[ "${PV}" = 9999* ]]; then + EGIT_REPO_URI="${SELINUX_GIT_REPO:-https://anongit.gentoo.org/git/proj/hardened-refpolicy.git}" + EGIT_BRANCH="${SELINUX_GIT_BRANCH:-master}" + EGIT_CHECKOUT_DIR="${WORKDIR}/refpolicy" + + inherit git-r3 +else + MY_PV=$(ver_cut 1-2) + SRC_URI="https://github.com/SELinuxProject/refpolicy/releases/download/RELEASE_${MY_PV/./_}/refpolicy-${MY_PV}.tar.bz2 + https://dev.gentoo.org/~perfinion/patches/selinux-base-policy/patchbundle-selinux-base-policy-${PV/_p/-r}.tar.bz2" + KEYWORDS="amd64 arm arm64 ~riscv x86" +fi + +S="${WORKDIR}" + +LICENSE="GPL-2" +SLOT="0" +IUSE=" + doc +unknown-perms systemd +ubac +unconfined + +selinux_policy_types_targeted +selinux_policy_types_strict +selinux_policy_types_mcs +selinux_policy_types_mls +" +REQUIRED_USE=" + || ( selinux_policy_types_targeted selinux_policy_types_strict selinux_policy_types_mcs selinux_policy_types_mls ) +" + +RDEPEND=">=sys-apps/policycoreutils-2.8" +DEPEND="${RDEPEND}" +BDEPEND=" + ${PYTHON_DEPS} + >=sys-apps/checkpolicy-2.8 + sys-devel/m4 +" + +src_prepare() { + if [[ "${PV}" != 9999* ]]; then + einfo "Applying SELinux policy updates... " + eapply -p0 "${WORKDIR}/0001-full-patch-against-stable-release.patch" + fi + + eapply_user + + cd "${S}/refpolicy" || die + emake bare +} + +src_configure() { + # Update the SELinux refpolicy capabilities based on the users' USE flags. + if use unknown-perms; then + sed -i -e '/^UNK_PERMS/s/deny/allow/' "${S}/refpolicy/build.conf" \ + || die "Failed to allow Unknown Permissions Handling" + sed -i -e '/^UNK_PERMS/s/deny/allow/' "${S}/refpolicy/Makefile" \ + || die "Failed to allow Unknown Permissions Handling" + fi + + if ! use ubac; then + sed -i -e '/^UBAC/s/y/n/' "${S}/refpolicy/build.conf" \ + || die "Failed to disable User Based Access Control" + fi + + if use systemd; then + sed -i -e '/^SYSTEMD/s/n/y/' "${S}/refpolicy/build.conf" \ + || die "Failed to enable SystemD" + fi + + echo "DISTRO = gentoo" >> "${S}/refpolicy/build.conf" || die + + # Prepare initial configuration + cd "${S}/refpolicy" || die + emake conf + + # Setup the policies based on the types delivered by the end user. + # These types can be "targeted", "strict", "mcs" and "mls". + for type in targeted strict mcs mls; do + if use "selinux_policy_types_${type}"; then + cp -a "${S}/refpolicy" "${S}/${type}" || die + cd "${S}/${type}" || die + + sed -i -e "/= module/d" "${S}/${type}/policy/modules.conf" || die + + sed -i -e '/^QUIET/s/n/y/' -e "/^NAME/s/refpolicy/${type}/" \ + "${S}/${type}/build.conf" || die "build.conf setup failed." + + if [[ "${type}" = "mls" || "${type}" = "mcs" ]]; then + # MCS/MLS require additional settings + sed -i -e "/^TYPE/s/standard/${type}/" "${S}/${type}/build.conf" \ + || die "failed to set type to mls" + fi + + if [[ "${type}" = "targeted" ]]; then + sed -i -e '/root/d' -e 's/user_u/unconfined_u/' \ + "${S}/${type}/config/appconfig-standard/seusers" \ + || die "targeted seusers setup failed." + fi + + if [[ "${type}" != "targeted" && "${type}" != "strict" ]] && use unconfined; then + sed -i -e '/root/d' -e 's/user_u/unconfined_u/' \ + "${S}/${type}/config/appconfig-${type}/seusers" \ + || die "policy seusers setup failed." + fi + fi + done +} + +src_compile() { + for type in targeted strict mcs mls; do + if use "selinux_policy_types_${type}"; then + cd "${S}/${type}" || die + emake base + use doc && emake html + fi + done +} + +src_install() { + for type in targeted strict mcs mls; do + if use "selinux_policy_types_${type}"; then + cd "${S}/${type}" || die + + emake DESTDIR="${D}" install + emake DESTDIR="${D}" install-headers + + echo "run_init_t" > "${D}/etc/selinux/${type}/contexts/run_init_type" || die + + echo "textrel_shlib_t" >> "${D}/etc/selinux/${type}/contexts/customizable_types" || die + + # libsemanage won't make this on its own + keepdir "/etc/selinux/${type}/policy" + + if use doc; then + docinto "${type}/html" + dodoc -r doc/html/*; + fi + + insinto /usr/share/selinux/devel; + doins doc/policy.xml; + fi + done + + docinto / + dodoc doc/Makefile.example doc/example.{te,fc,if} + + doman man/man8/*.8; + + insinto /etc/selinux + doins "${FILESDIR}/config" + + insinto /usr/share/portage/config/sets + doins "${FILESDIR}/selinux.conf" +} diff --git a/sec-policy/selinux-base/selinux-base-9999.ebuild b/sec-policy/selinux-base/selinux-base-9999.ebuild index bdb6a700eef4..69fecc0d5264 100644 --- a/sec-policy/selinux-base/selinux-base-9999.ebuild +++ b/sec-policy/selinux-base/selinux-base-9999.ebuild @@ -1,13 +1,17 @@ -# Copyright 1999-2025 Gentoo Authors +# Copyright 1999-2026 Gentoo Authors # Distributed under the terms of the GNU General Public License v2 -EAPI="7" +EAPI=8 -PYTHON_COMPAT=( python3_{10..12} ) +PYTHON_COMPAT=( python3_{11..14} ) PYTHON_REQ_USE="xml(+)" + inherit python-any-r1 -if [[ ${PV} == 9999* ]]; then +DESCRIPTION="Gentoo base policy for SELinux" +HOMEPAGE="https://wiki.gentoo.org/wiki/Project:SELinux" + +if [[ "${PV}" = 9999* ]]; then EGIT_REPO_URI="${SELINUX_GIT_REPO:-https://anongit.gentoo.org/git/proj/hardened-refpolicy.git}" EGIT_BRANCH="${SELINUX_GIT_BRANCH:-master}" EGIT_CHECKOUT_DIR="${WORKDIR}/refpolicy" @@ -15,30 +19,34 @@ if [[ ${PV} == 9999* ]]; then inherit git-r3 else SRC_URI="https://github.com/SELinuxProject/refpolicy/releases/download/RELEASE_${PV/./_}/refpolicy-${PV}.tar.bz2 - https://dev.gentoo.org/~perfinion/patches/selinux-base-policy/patchbundle-selinux-base-policy-${PVR}.tar.bz2" + https://dev.gentoo.org/~perfinion/patches/selinux-base-policy/patchbundle-selinux-base-policy-${PVR}.tar.bz2" KEYWORDS="~amd64 ~arm ~arm64 ~riscv ~x86" fi -IUSE="doc +unknown-perms systemd +ubac +unconfined" +S="${WORKDIR}" -DESCRIPTION="Gentoo base policy for SELinux" -HOMEPAGE="https://wiki.gentoo.org/wiki/Project:SELinux" LICENSE="GPL-2" SLOT="0" +IUSE=" + doc +unknown-perms systemd +ubac +unconfined + +selinux_policy_types_targeted +selinux_policy_types_strict +selinux_policy_types_mcs +selinux_policy_types_mls +" +REQUIRED_USE=" + || ( selinux_policy_types_targeted selinux_policy_types_strict selinux_policy_types_mcs selinux_policy_types_mls ) +" RDEPEND=">=sys-apps/policycoreutils-2.8" DEPEND="${RDEPEND}" BDEPEND=" ${PYTHON_DEPS} >=sys-apps/checkpolicy-2.8 - sys-devel/m4" - -S=${WORKDIR}/ + sys-devel/m4 +" src_prepare() { - if [[ ${PV} != 9999* ]]; then - einfo "Applying SELinux policy updates ... " + if [[ "${PV}" != 9999* ]]; then + einfo "Applying SELinux policy updates... " eapply -p0 "${WORKDIR}/0001-full-patch-against-stable-release.patch" fi @@ -49,8 +57,6 @@ src_prepare() { } src_configure() { - [ -z "${POLICY_TYPES}" ] && local POLICY_TYPES="targeted strict mls mcs" - # Update the SELinux refpolicy capabilities based on the users' USE flags. if use unknown-perms; then sed -i -e '/^UNK_PERMS/s/deny/allow/' "${S}/refpolicy/build.conf" \ @@ -77,72 +83,70 @@ src_configure() { # Setup the policies based on the types delivered by the end user. # These types can be "targeted", "strict", "mcs" and "mls". - for i in ${POLICY_TYPES}; do - cp -a "${S}/refpolicy" "${S}/${i}" || die - cd "${S}/${i}" || die - - sed -i -e "/= module/d" "${S}/${i}/policy/modules.conf" || die - - sed -i -e '/^QUIET/s/n/y/' -e "/^NAME/s/refpolicy/$i/" \ - "${S}/${i}/build.conf" || die "build.conf setup failed." - - if [[ "${i}" == "mls" ]] || [[ "${i}" == "mcs" ]]; - then - # MCS/MLS require additional settings - sed -i -e "/^TYPE/s/standard/${i}/" "${S}/${i}/build.conf" \ - || die "failed to set type to mls" - fi - - if [ "${i}" == "targeted" ]; then - sed -i -e '/root/d' -e 's/user_u/unconfined_u/' \ - "${S}/${i}/config/appconfig-standard/seusers" \ - || die "targeted seusers setup failed." - fi - - if [ "${i}" != "targeted" ] && [ "${i}" != "strict" ] && use unconfined; then - sed -i -e '/root/d' -e 's/user_u/unconfined_u/' \ - "${S}/${i}/config/appconfig-${i}/seusers" \ - || die "policy seusers setup failed." + for type in targeted strict mcs mls; do + if use "selinux_policy_types_${type}"; then + cp -a "${S}/refpolicy" "${S}/${type}" || die + cd "${S}/${type}" || die + + sed -i -e "/= module/d" "${S}/${type}/policy/modules.conf" || die + + sed -i -e '/^QUIET/s/n/y/' -e "/^NAME/s/refpolicy/${type}/" \ + "${S}/${type}/build.conf" || die "build.conf setup failed." + + if [[ "${type}" = "mls" || "${type}" = "mcs" ]]; then + # MCS/MLS require additional settings + sed -i -e "/^TYPE/s/standard/${type}/" "${S}/${type}/build.conf" \ + || die "failed to set type to mls" + fi + + if [[ "${type}" = "targeted" ]]; then + sed -i -e '/root/d' -e 's/user_u/unconfined_u/' \ + "${S}/${type}/config/appconfig-standard/seusers" \ + || die "targeted seusers setup failed." + fi + + if [[ "${type}" != "targeted" && "${type}" != "strict" ]] && use unconfined; then + sed -i -e '/root/d' -e 's/user_u/unconfined_u/' \ + "${S}/${type}/config/appconfig-${type}/seusers" \ + || die "policy seusers setup failed." + fi fi done } src_compile() { - [ -z "${POLICY_TYPES}" ] && local POLICY_TYPES="targeted strict mls mcs" - - for i in ${POLICY_TYPES}; do - cd "${S}/${i}" || die - emake base - if use doc; then - emake html + for type in targeted strict mcs mls; do + if use "selinux_policy_types_${type}"; then + cd "${S}/${type}" || die + emake base + use doc && emake html fi done } src_install() { - [ -z "${POLICY_TYPES}" ] && local POLICY_TYPES="targeted strict mls mcs" + for type in targeted strict mcs mls; do + if use "selinux_policy_types_${type}"; then + cd "${S}/${type}" || die - for i in ${POLICY_TYPES}; do - cd "${S}/${i}" || die + emake DESTDIR="${D}" install + emake DESTDIR="${D}" install-headers - emake DESTDIR="${D}" install - emake DESTDIR="${D}" install-headers + echo "run_init_t" > "${D}/etc/selinux/${type}/contexts/run_init_type" || die - echo "run_init_t" > "${D}/etc/selinux/${i}/contexts/run_init_type" || die + echo "textrel_shlib_t" >> "${D}/etc/selinux/${type}/contexts/customizable_types" || die - echo "textrel_shlib_t" >> "${D}/etc/selinux/${i}/contexts/customizable_types" || die + # libsemanage won't make this on its own + keepdir "/etc/selinux/${type}/policy" - # libsemanage won't make this on its own - keepdir "/etc/selinux/${i}/policy" + if use doc; then + docinto "${type}/html" + dodoc -r doc/html/*; + fi - if use doc; then - docinto ${i}/html - dodoc -r doc/html/*; + insinto /usr/share/selinux/devel; + doins doc/policy.xml; fi - - insinto /usr/share/selinux/devel; - doins doc/policy.xml; - done docinto / -- 2.53.0