firmware load for b43/ucode13.fw failed
Gössl Gerhard <[email protected]> Fri, 9 Sep 2016 10:31:32 +0200
| Newsgroups | gmane.linux.gentoo.user.german |
|---|---|
| Message-ID | <[email protected]> |
Hallo , dmesg bringt bei meinem selbstgebackenen Kernel folgendes: b43-phy0: Broadcom 4311 WLAN found (core revision 13) b43-phy0: Found PHY: Analog 4, Type 2 (G), Revision 9 b43-phy0: Found Radio: Manuf 0x17F, ID 0x2050, Revision 2, Version 0 b43-phy0 warning: 5 GHz band is unsupported on this PHY b43 ssb0:0: Direct firmware load for b43/ucode13.fw failed with error -2 b43 ssb0:0: Direct firmware load for b43/ucode13.fw failed with error -2 b43 ssb0:0: Direct firmware load for b43-open/ucode13.fw failed with error -2 b43 ssb0:0: Direct firmware load for b43-open/ucode13.fw failed with error -2 b43-phy0 ERROR: Firmware file "b43/ucode13.fw" not found b43-phy0 ERROR: Firmware file "b43-open/ucode13.fw" not found b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website. Habe aber sys-kernel/linux-firmware-20160628 installiert !! Die Treiber für den Broadcom 4311 sind als Module installiert. GRUß Gerhard Gössl isny im ALL