Re: [gentoo-user-hu] Re: CD eject probléma

Szia!

Elvileg nincs.
Este leszek gép előtt, akkor tudom megmondani pontosan.

Testa <[email protected]> írta (2010. június 24. 23:54):
> Bocs hogy közbe röfögök nem olvastam végig mindent elég figyelmesen.
> De nincs véletlen bekapcsolva a scsi emuláció????
>
> On 23 June 2010 23:30, Bukuli Norbert <[email protected]> wrote:
>> A config magától generálódik, minden induláskor.
>>
>> $ sudo grep 0000:03:00.0 /var/log/dmesg
>> pci 0000:03:00.0: reg 24 32bit mmio: [0xf8000000-0xf8001fff]
>> pci 0000:03:00.0: PME# supported from D3hot
>> pci 0000:03:00.0: PME# disabled
>> ahci 0000:03:00.0: version 3.0
>> ahci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>> ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
>> ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
>> ahci 0000:03:00.0: setting latency timer to 64
>>
>>
>> $ sudo grep 0000:03:00.1 /var/log/dmesg
>> pci 0000:03:00.1: reg 10 io port: [0xc000-0xc007]
>> pci 0000:03:00.1: reg 14 io port: [0xc100-0xc103]
>> pci 0000:03:00.1: reg 18 io port: [0xc200-0xc207]
>> pci 0000:03:00.1: reg 1c io port: [0xc300-0xc303]
>> pci 0000:03:00.1: reg 20 io port: [0xc400-0xc40f]
>> jmicron 0000:03:00.1: IDE controller (0x197b:0x2363 rev 0x02)
>> pci 0000:03:00.1: enabling device (0000 -> 0001)
>> pci 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>> jmicron 0000:03:00.1: 100% native mode on irq 17
>> pci 0000:03:00.1: setting latency timer to 64
>>
>> Sajnos nem vagyok tisztában vele, hogy a PCI buszon milyen szabályok
>> szerint történik az eszközök számozása, de ha a .1 végűt összevetem a
>> korábban írtakkal, akkor lehet némi tartománybeli egyezést
>> megfigyelni:
>>
>> ide0 at 0xc000-0xc007,0xc102 on irq 17
>> pci 0000:03:00.1: reg 10 io port: [0xc000-0xc007]
>>
>> ill.:
>>
>> ide1 at 0xc200-0xc207,0xc302 on irq 17
>> pci 0000:03:00.1: reg 18 io port: [0xc200-0xc207]
>>
>>
>> Persze lehet, hogy ez két teljesen külön álló buszon szereplő
>> címtartomány és csak véletlen egybeesésről van szó.
>>
>> 2010/6/23 cjvt <[email protected]>:
>>> Nem biztos de ez alapjan a NEC-nek a rule-ban nem a
>>> pci-0000:03:00.0 -on kene lennie?
>>>
>>>
>>> 2010. június 23. 22:44:52 dátummal Bukuli Norbert az alábbiakat írta:
>>>> Úgy értettem, hogy egy eject folyamán nem keletkezik semmilyen
>>>> bejegyzés a dmesgben.
>>>>
>>>> A vonatkozó sorok:
>>>> Probing IDE interface ide0...
>>>> hda: _NEC DVD_RW ND-3500AG, ATAPI CD/DVD-ROM drive
>>>> hdb: PIONEER DVD-RW DVR-111D, ATAPI CD/DVD-ROM drive
>>>> hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
>>>> hda: UDMA/33 mode selected
>>>> hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4
>>>> hdb: UDMA/66 mode selected
>>>> Probing IDE interface ide1...
>>>> ide0 at 0xc000-0xc007,0xc102 on irq 17
>>>> ide1 at 0xc200-0xc207,0xc302 on irq 17
>>>> ide_generic: please use "probe_mask=0x3f" module parameter for probing
>>>> all legacy ISA IDE ports
>>>> ide-gd driver 1.18
>>>> ide-cd driver 5.00
>>>> ide-cd: hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
>>>> Uniform CD-ROM driver Revision: 3.20
>>>> ide-cd: hdb: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache
>>>>
>>>> ata4.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>>>> ata4.01: HPA detected: current 234439535, native 234441648
>>>> ata4.01: ATA-7: SAMSUNG HD120IJ, WZ100-33, max UDMA7
>>>> ata4.01: 234439535 sectors, multi 16: LBA48 NCQ (depth 0/32)
>>>> ata4.01: configured for UDMA/133
>>>>
>>>> ata3.01: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
>>>> ata3.01: HPA detected: current 976771055, native 976773168
>>>> ata3.01: ATA-8: WDC WD5000AAKS-22A7B0, 01.03B01, max UDMA/133
>>>> ata3.01: 976771055 sectors, multi 16: LBA48 NCQ (depth 0/32)
>>>> ata3.01: configured for UDMA/133
>>>>
>>>>
>>>> # lshw -C disk
>>>>   *-cdrom:0
>>>>        description: DVD writer
>>>>        product: _NEC DVD_RW ND-3500AG
>>>>        physical id: 0
>>>>        bus info: [email protected]
>>>>        logical name: /dev/hda
>>>>        version: 2.1B
>>>>        capabilities: packet atapi cdrom removable nonmagnetic dma lba
>>>> iordy audio cd-r cd-rw dvd dvd-r
>>>>        configuration: mode=udma2 status=nodisc
>>>>   *-cdrom:1
>>>>        description: DVD writer
>>>>        product: PIONEER DVD-RW DVR-111D
>>>>        vendor: Pioneer
>>>>        physical id: 1
>>>>        bus info: [email protected]
>>>>        logical name: /dev/hdb
>>>>        version: 1.19
>>>>        capabilities: packet atapi cdrom removable nonmagnetic dma lba
>>>> iordy pm audio cd-r cd-rw dvd dvd-r
>>>>        configuration: mode=udma4 status=nodisc
>>>>   *-disk:0
>>>>        description: ATA Disk
>>>>        product: WDC WD5000AAKS-2
>>>>        vendor: Western Digital
>>>>        physical id: 0
>>>>        bus info: scsi@2:0.1.0
>>>>        logical name: /dev/sda
>>>>        version: 01.0
>>>>        serial: WD-WMASY3020281
>>>>        size: 465GiB (500GB)
>>>>        capabilities: partitioned partitioned:dos
>>>>        configuration: ansiversion=5 signature=24eeb6a2
>>>>   *-disk:1
>>>>        description: ATA Disk
>>>>        product: SAMSUNG HD120IJ
>>>>        physical id: 1
>>>>        bus info: scsi@3:0.1.0
>>>>        logical name: /dev/sdb
>>>>        version: WZ10
>>>>        serial: S0AEJ1LYB06095
>>>>        size: 111GiB (120GB)
>>>>        capabilities: partitioned partitioned:dos
>>>>        configuration: ansiversion=5 signature=a8a8a8a8
>>>>
>>>
>>>
>>
>>
>>
>> --
>> Üdvözlettel:
>> Bukuli Norbert
>>
>>
>
>
>
> --
> www.airndsoft.com
> Artificial Intelligence Research aNd Development Software Company
>
>



-- 
Üdvözlettel:
Bukuli Norbert