Re: [grisbi-devel] Grisbi 2.0 pour bientôt ?

Le mer. 6 janv. 2021 à 23:35, Nicolas LAURENT <[email protected]> a écrit :

> hello
>
> mince je me suis loupé dans la doc. Pour meson, il s'agit d'un module
> python. J'ai fini par faire un "pip install meson".
>

De mon côté je l'ai installé avec Homebrew pour pouvoir continuer.
J'ai donc un environnement jhbuild à jour. Mais j'ai toujours le crash sur
Big Sur alors que "ça marche" sur Mojave.

Je suspecte aussi un problème de pointeur.
Sur Big Sur dans le debugger j'ai :
* thread #1, queue = 'com.apple.main-thread', stop reason = EXC_BAD_ACCESS
(code=1, address=0x80)
    frame #0: 0x0000000109e29e40
libgoffice-0.10.10.dylib`gog_plot_clear_series + 16
libgoffice-0.10.10.dylib`gog_plot_clear_series:
->  0x109e29e40 <+16>: cmpq   $0x0, 0x80(%rax)
    0x109e29e48 <+24>: je     0x109e29e92               ; <+98>
    0x109e29e4e <+30>: movq   -0x8(%rbp), %rax
    0x109e29e52 <+34>: movq   0x80(%rax), %rax
Target 0: (Grisbi-bin) stopped.
(lldb) bt
* thread #1, queue = 'com.apple.main-thread', stop reason = EXC_BAD_ACCESS
(code=1, address=0x80)
  * frame #0: 0x0000000109e29e40
libgoffice-0.10.10.dylib`gog_plot_clear_series + 16
    frame #1: 0x0000000100959971 Grisbi-bin`bet_graph_affiche_camemberts +
65
    frame #2: 0x0000000100959415 Grisbi-bin`bet_graph_sectors_graph_new +
1141
    frame #3: 0x000000010cca0736
libgobject-2.0.0.dylib`_g_closure_invoke_va + 198
    frame #4: 0x000000010ccb71cf
libgobject-2.0.0.dylib`g_signal_emit_valist + 1407
    frame #5: 0x000000010ccb7dd9
libgobject-2.0.0.dylib`g_signal_emit_by_name + 441
    frame #6: 0x000000010a68b969 libgtk-3.0.dylib`button_clicked + 73
    frame #7: 0x000000010cca0736
libgobject-2.0.0.dylib`_g_closure_invoke_va + 198
    frame #8: 0x000000010ccb71cf
libgobject-2.0.0.dylib`g_signal_emit_valist + 1407
    frame #9: 0x000000010ccb7c02 libgobject-2.0.0.dylib`g_signal_emit + 130
    frame #10: 0x000000010a36be96 libgtk-3.0.dylib`gtk_button_clicked + 198
    frame #11: 0x000000010a370a3d libgtk-3.0.dylib`gtk_button_do_release +
109
    frame #12: 0x000000010a36ffe0 libgtk-3.0.dylib`gtk_real_button_released
+ 128
    frame #13: 0x000000010cca0736
libgobject-2.0.0.dylib`_g_closure_invoke_va + 198
    frame #14: 0x000000010ccb71cf
libgobject-2.0.0.dylib`g_signal_emit_valist + 1407
    frame #15: 0x000000010ccb7c02 libgobject-2.0.0.dylib`g_signal_emit + 130
    frame #16: 0x000000010a370ca9 libgtk-3.0.dylib`multipress_released_cb +
73
    frame #17: 0x000000010a77d240
libgtk-3.0.dylib`_gtk_marshal_VOID__INT_DOUBLE_DOUBLEv + 640
    frame #18: 0x000000010cca0736
libgobject-2.0.0.dylib`_g_closure_invoke_va + 198
    frame #19: 0x000000010ccb71cf
libgobject-2.0.0.dylib`g_signal_emit_valist + 1407
    frame #20: 0x000000010ccb7c02 libgobject-2.0.0.dylib`g_signal_emit + 130
    frame #21: 0x000000010a49c9e8
libgtk-3.0.dylib`gtk_gesture_multi_press_end + 152
    frame #22: 0x000000010cca3d54
libgobject-2.0.0.dylib`g_cclosure_marshal_VOID__BOXEDv + 180
    frame #23: 0x000000010cca0736
libgobject-2.0.0.dylib`_g_closure_invoke_va + 198
    frame #24: 0x000000010ccb71cf
libgobject-2.0.0.dylib`g_signal_emit_valist + 1407
    frame #25: 0x000000010ccb7c02 libgobject-2.0.0.dylib`g_signal_emit + 130
    frame #26: 0x000000010a49a749
libgtk-3.0.dylib`_gtk_gesture_set_recognized + 153
    frame #27: 0x000000010a496f68
libgtk-3.0.dylib`_gtk_gesture_check_recognized + 88
    frame #28: 0x000000010a49993a libgtk-3.0.dylib`gtk_gesture_handle_event
+ 570
    frame #29: 0x000000010a49f67d
libgtk-3.0.dylib`gtk_gesture_single_handle_event + 877
    frame #30: 0x000000010a446328
libgtk-3.0.dylib`gtk_event_controller_handle_event + 376
    frame #31: 0x000000010a706b74
libgtk-3.0.dylib`_gtk_widget_run_controllers + 244
    frame #32: 0x000000010a71bc92
libgtk-3.0.dylib`gtk_widget_real_button_event + 34
    frame #33: 0x000000010a771354
libgtk-3.0.dylib`_gtk_marshal_BOOLEAN__BOXEDv + 468
    frame #34: 0x000000010cca0736
libgobject-2.0.0.dylib`_g_closure_invoke_va + 198
    frame #35: 0x000000010ccb71cf
libgobject-2.0.0.dylib`g_signal_emit_valist + 1407
    frame #36: 0x000000010ccb7c02 libgobject-2.0.0.dylib`g_signal_emit + 130
    frame #37: 0x000000010a7065a0
libgtk-3.0.dylib`gtk_widget_event_internal + 800
    frame #38: 0x000000010a706274 libgtk-3.0.dylib`gtk_widget_event + 356
    frame #39: 0x000000010a50f9e2 libgtk-3.0.dylib`propagate_event_up + 98
    frame #40: 0x000000010a50e9da libgtk-3.0.dylib`propagate_event + 410
    frame #41: 0x000000010a50dee0 libgtk-3.0.dylib`gtk_propagate_event + 256
    frame #42: 0x000000010a50d6f9 libgtk-3.0.dylib`gtk_main_do_event + 1817
    frame #43: 0x000000010b5ef175 libgdk-3.0.dylib`_gdk_event_emit + 69
    frame #44: 0x000000010b633d4f libgdk-3.0.dylib`gdk_event_dispatch + 79
    frame #45: 0x000000010cdaad76
libglib-2.0.0.dylib`g_main_context_dispatch + 310
    frame #46: 0x000000010cdab0f2
libglib-2.0.0.dylib`g_main_context_iterate + 514
    frame #47: 0x000000010cdab1a6
libglib-2.0.0.dylib`g_main_context_iteration + 102
    frame #48: 0x000000010c7d68bd libgio-2.0.0.dylib`g_application_run + 541
    frame #49: 0x000000010093e788 Grisbi-bin`main + 280
    frame #50: 0x00007fff20330621 libdyld.dylib`start + 1
    frame #51: 0x00007fff20330621 libdyld.dylib`start + 1
(lldb)

La ligne qui plante est la 404 dans bet_graph.c :
    gog_plot_clear_series ( GOG_PLOT ( cur_plot ) );

Je vais installer ce qu'il faut sur Big Sur pour pouvoir débugger.

En tout logique, le jhbuild devrait rendre la commande "meson" dispo. Je
> crois avoir eu le meme soucis.
>

En tout logique :-)
Mais non.

à+

-- 
 Dr. Ludovic Rousseau

_______________________________________________
devel mailing list
[email protected]
http://listes.grisbi.org/mailman/listinfo/devel