Re: PERC H700 Firmware '12.10.1-0001' is out of date
Helmut Wollmersdorfer <[email protected]>
| Newsgroups | gmane.linux.hardware.dell.poweredge |
|---|---|
| Message-ID | <[email protected]> |
Am 12.08.2015 um 15:45 schrieb Eero Volotinen <[email protected]>: > Via idrac remote keyboard & screen? > > It’s not possible to use the lifecycle controller via SSH/SOL: Error message: Unified Server Configurator does not support console redirection. This is a known issue since 5 years by Dell, nothing happend. > Eero > > 12.8.2015 4.44 ip. "Helmut Wollmersdorfer" <[email protected]> kirjoitti: > > > > > Am 12.08.2015 um 14:13 schrieb Eero Volotinen <[email protected]>: > >> How about using lifecycle controller to update all firmwares? >> > This works without travelling to the datacenter? >> Eero >> >> 12.8.2015 3.12 ip. "Helmut Wollmersdorfer" <[email protected]> kirjoitti: >> Hi, >> >> after upgrade to Debian Wheezy and upgrade of OMSA (srvadmin-all) to 7.4 >> >> - the monitoring warns with PERC H700 Firmware '12.10.1-0001' is out of date >> - the iDRAC web interface does not show the storage system or controller (should it?), like iDRAC 7 does. >> >> Is there a way upgrading the firmware of the PERC H700 and iDRAC via web or ssh? I.e. without travelling to the remote location of the servers. >> >> Also I couldn’t find an image file of the iDRAC firmware which I can upload via web interface. Or do they really mean I should buy or use Windows to extract the image? >> >> TIA >> >> Helmut Wollmersdorfer >> >> >> >> >> >> _______________________________________________ >> Linux-PowerEdge mailing list >> [email protected] >> https://lists.us.dell.com/mailman/listinfo/linux-poweredge >> > > > _______________________________________________ > Linux-PowerEdge mailing list > [email protected] > https://lists.us.dell.com/mailman/listinfo/linux-poweredge > _______________________________________________ Linux-PowerEdge mailing list [email protected] https://lists.us.dell.com/mailman/listinfo/linux-poweredge