Re: way to check whether bmc (idrac) is using dedicated vs shared connection??

Hi Rich,

You should be able to do this with OpenIPMI and ipmitool

	# yum install OpenIPMI ipmitool
	# service OpenIPMI start
	# chkconfig OpenIPMI on
	# ipmitool delloem lan get

See man ipmitool and this Dell white paper for more

	Overview of Dell Embedded Systems Management Using IPMI
	http://en.community.dell.com/techcenter/extras/m/white_papers/20441100

Stefan

> On Dec 13, 2015, at 8:07 PM, Rich Sudlow <[email protected]> wrote:
> 
> Is there an easy way in RHELS6.7 to check to see if the bmc (idrac) is using a
> dedicated network connection or a shared connection? I'd like to do this on
> various poweredge machines R510, R710,R720,R730,R815.  Id prefer to do this
> without any additional Dell software if possible (only using standard red hat).
> 
> Thanks,
> 
> Rich
> -- 
> Rich Sudlow
> University of Notre Dame
> Center for Research Computing - Union Station
> 506 W. South St
> South Bend, In 46601
> 
> (574) 631-7258 (office)
> (574) 807-1046 (cell)
> 
> _______________________________________________
> Linux-PowerEdge mailing list
> [email protected]
> https://lists.us.dell.com/mailman/listinfo/linux-poweredge