Re: srvadmin 8.3.0 problems with dsm_sa_datamgrd

OMSA 8.3.0
SciLinux 7.2
two different R310's that see the "segfault" error
three different R610's that see the "general protection fault" error

All these systems were running OMSA 8.2.0 until the last monthly 
update.  They updated all the srvadmin-* packages starting yesterday and 
are now in this state.

Most of my other systems updated and I had to manually restart using 
srvadmin-services.sh and then a restart of snmpd to get the OMSA 
monitoring working again.

Note in the original email on one system I did remove all srvadmin 
packages, moved the /opt/omd directory and reinstalled srvadmin-all from 
scratch with no change in behavior.

On 03/22/2016 09:07 AM, [email protected] wrote:
>
> *Dell - Internal Use - Confidential *
>
> Hello,
>
> Can you share the OpenManage Version used, Operating System version in 
> use and PowerEdge Server in use.
>
> Is this a fresh installation of OpenManage or Upgrade from any earlier 
> OpenManage installation.
>
> Thanks
>
> Rajkumar
>
> -----Original Message-----
> From: linux-poweredge-bounces-Lists On Behalf Of Stephen Berg (Contractor)
> Sent: Tuesday, March 22, 2016 6:18 PM
> To: linux-poweredge-Lists
> Subject: [Linux-PowerEdge] srvadmin 8.3.0 problems with dsm_sa_datamgrd
>
> Got a couple of systems that just won't start the dsm_sa_datamgrd 
> service. This is breaking my monitoring setup (OMD/check_mk).
>
> [root@sage ~]# srvadmin-services.sh status dell_rbu (module) is 
> running ipmi driver is running dsm_sa_datamgrd is stopped 
> dsm_sa_eventmgrd (pid 11571) is running dsm_sa_snmpd (pid 11594) is 
> running dsm_om_shrsvcd (pid 11640) is running dsm_om_connsvcd (pid 
> 11714 11710) is running
>
> I've tried restarting, stopping and then starting. Rebooted the 
> system, checked it for updates in the OS (SciLinux 7.2) and dsu, it's 
> up to date for everything.
>
> Removed all the srvadmin-* packages, moved /opt/dell to /opt.dell.bak 
> and tried a "yum install srvadmin-all". The dsm_sa_datamgrd service 
> still won't start.
>
> I'm seeing this in /var/log/messages:
> Mar 22 07:44:13 servername kernel: dsm_sa_datamgrd[786]: segfault at
> 7f921ce63388 ip 00007f92129c2591 sp 00007fff49cf1d50 error 4 in 
> ld-2.17.so[7f92129b9000+21000]
>
> --
> Stephen Berg
> Systems Administrator
> NRL Code: 7320
> Office: 228-688-5738
> [email protected] <mailto:[email protected]>
>
> _______________________________________________
> Linux-PowerEdge mailing list
> [email protected] <mailto:[email protected]>
> https://lists.us.dell.com/mailman/listinfo/linux-poweredge
>
>
>
> _______________________________________________
> Linux-PowerEdge mailing list
> [email protected]
> https://lists.us.dell.com/mailman/listinfo/linux-poweredge


-- 
Stephen Berg
Systems Administrator
NRL Code: 7320
Office: 228-688-5738
[email protected]

_______________________________________________
Linux-PowerEdge mailing list
[email protected]
https://lists.us.dell.com/mailman/listinfo/linux-poweredge