R610 with Perc6/i dead after kernel update on SLES11

Hello,

every Dell PowerEdge R610 with Perc6/i break after kernel update to
3.0.101-71-default on SLES11. During the boot process the kernel fall
into an infinite loop when he tries to initialize the megaraid_sas driver.

...
... vpd r/w failed. This is likely a firmware bug on this device.
Contact the card vendor for a firmware update.
... vpd r/w failed. This is likely a firmware bug on this device.
Contact the card vendor for a firmware update.
... vpd r/w failed. This is likely a firmware bug on this device.
Contact the card vendor for a firmware update.
...

The only chance is to downgrade to the previous kernel 3.0.101-68 again.

PERC 6/i
Firmware-Version	6.3.3.0002
Treiberversion	06.806.08.00-rc1

Thanks,
Werner Frerichs

--

_______________________________________________
Linux-PowerEdge mailing list
[email protected]
https://lists.us.dell.com/mailman/listinfo/linux-poweredge