Re: Cannot find libsmbios-2.2.27-1908.9058.el6.x86_64

Patrick Boutilier <[email protected]>
Newsgroups gmane.linux.hardware.dell.poweredge
Message-ID <[email protected]> 
Disable the old dell-omsa-repository.repo and then run:

yum remove dell_ie_rac python-smbios


Then yum update/upgrade should work.




On 04/26/2016 09:27 AM, Manoel Pinho wrote:
> I have a PowerEdge with CentOS release 6.7 with the folowing
> repositories enabled:
>
> base
> dell-omsa-indep
> dell-omsa-specific
> dell-system-update_dependent
> epel
> extras
> updates
>
>
> For the first time I have the following error whan I tried to update the
> system:
>
> # yum update --downloadonly
>
> Loaded plugins: fastestmirror
> Setting up Update Process
> Loading mirror speeds from cached hostfile
>   * base: mirror.nbtelecom.com.br
>   * epel: epel.gtdinternet.com
>   * extras: mirror.nbtelecom.com.br
>   * updates: mirror.nbtelecom.com.br
> Resolving Dependencies
> --> Running transaction check
> ---> Package libsmbios.x86_64 0:2.2.27-4.155.1.el6 will be updated
> --> Processing Dependency: libsmbios = 2.2.27-4.155.1.el6 for package:
> python-smbios-2.2.27-4.155.1.el6.x86_64
> ---> Package libsmbios.x86_64 0:2.2.27-1908.9058.el6 will be an update
> ---> Package smbios-utils-bin.x86_64 0:2.2.27-4.155.1.el6 will be updated
> ---> Package smbios-utils-bin.x86_64 0:2.2.27-1908.9058.el6 will be an
> update
> ---> Package srvadmin-argtable2.x86_64 0:8.1.0-4.5.1.el6 will be updated
> ---> Package srvadmin-argtable2.x86_64 0:8.3.0-1908.9058.el6 will be an
> update
> ---> Package srvadmin-base.x86_64 0:8.1.0-4.3.1.el6 will be updated
> ---> Package srvadmin-base.x86_64 0:8.3.0-1908.9058.el6 will be an update
> ---> Package srvadmin-cm.x86_64 0:8.1.0-4.1.249.el6 will be updated
> ---> Package srvadmin-cm.x86_64 0:8.3.0-1908.9058.el6 will be an update
> ---> Package srvadmin-deng.x86_64 0:8.1.0-4.8.1.el6 will be updated
> ---> Package srvadmin-deng.x86_64 0:8.3.0-1908.9058.el6 will be an update
> ---> Package srvadmin-hapi.x86_64 0:8.1.0-4.10.2.el6 will be updated
> ---> Package srvadmin-hapi.x86_64 0:8.3.0-1908.9058.el6 will be an update
> ---> Package srvadmin-isvc.x86_64 0:8.1.0-4.38.1.el6 will be updated
> ---> Package srvadmin-isvc.x86_64 0:8.3.0-1908.9058.el6 will be an update
> ---> Package srvadmin-nvme.x86_64 0:8.1.0-4.139.1.el6 will be updated
> ---> Package srvadmin-nvme.x86_64 0:8.3.0-1908.9058.el6 will be an update
> ---> Package srvadmin-omacs.x86_64 0:8.1.0-4.92.1.el6 will be updated
> ---> Package srvadmin-omacs.x86_64 0:8.3.0-1908.9058.el6 will be an update
> ---> Package srvadmin-omilcore.x86_64 0:8.1.0-4.85.1.el6 will be updated
> ---> Package srvadmin-omilcore.x86_64 0:8.3.0-1908.9058.el6 will be an
> update
> ---> Package srvadmin-ominst.x86_64 0:8.1.0-4.94.3.el6 will be updated
> ---> Package srvadmin-ominst.x86_64 0:8.3.0-1908.9058.el6 will be an update
> ---> Package srvadmin-racadm4.x86_64 0:8.1.0-4.1.127.el6 will be updated
> ---> Package srvadmin-racadm4.x86_64 0:8.3.0-1908.9058.el6 will be an update
> ---> Package srvadmin-racadm5.x86_64 0:8.1.0-4.1.128.el6 will be updated
> --> Processing Dependency: srvadmin-racadm5 = 8.1.0 for package:
> dell_ie_rac_5-8.1.0-4.1.128.el6.x86_64
> ---> Package srvadmin-racadm5.x86_64 0:8.3.0-1908.9058.el6 will be an update
> ---> Package srvadmin-realssd.x86_64 0:8.1.0-4.139.1.el6 will be updated
> ---> Package srvadmin-realssd.x86_64 0:8.3.0-1908.9058.el6 will be an update
> ---> Package srvadmin-smcommon.x86_64 0:8.1.0-4.138.2.el6 will be updated
> ---> Package srvadmin-smcommon.x86_64 0:8.3.0-1908.9058.el6 will be an
> update
> ---> Package srvadmin-storelib.x86_64 0:8.1.0-4.139.1.el6 will be updated
> ---> Package srvadmin-storelib.x86_64 0:8.3.0-1908.9058.el6 will be an
> update
> ---> Package srvadmin-storelib-sysfs.x86_64 0:8.1.0-4.1.1.el6 will be
> updated
> ---> Package srvadmin-storelib-sysfs.x86_64 0:8.3.0-1908.9058.el6 will
> be an update
> --> Finished Dependency Resolution
> Error: Package: dell_ie_rac_5-8.1.0-4.1.128.el6.x86_64 (@dell-omsa-indep)
>             Requires: srvadmin-racadm5 = 8.1.0
>             Removing: srvadmin-racadm5-8.1.0-4.1.128.el6.x86_64
> (@dell-omsa-indep)
>                 srvadmin-racadm5 = 8.1.0-4.1.128.el6
>             Updated By: srvadmin-racadm5-8.3.0-1908.9058.el6.x86_64
> (dell-omsa-indep)
>                 srvadmin-racadm5 = 8.3.0-1908.9058.el6
> Error: Package: python-smbios-2.2.27-4.155.1.el6.x86_64 (@dell-omsa-indep)
>             Requires: libsmbios = 2.2.27-4.155.1.el6
>             Removing: libsmbios-2.2.27-4.155.1.el6.x86_64 (@dell-omsa-indep)
>                 libsmbios = 2.2.27-4.155.1.el6
>             Updated By: libsmbios-2.2.27-1908.9058.el6.x86_64
> (dell-omsa-indep)
>                 libsmbios = 2.2.27-1908.9058.el6
>             Available: libsmbios-2.2.26-3.el6.i686 (epel)
>                 libsmbios = 2.2.26-3.el6
>   You could try using --skip-broken to work around the problem
>   You could try running: rpm -Va --nofiles --nodigest
>
> ---------------------------------------
>
> The problem is that yum can't find libsmbios-2.2.27-1908.9058.el6.x86_64  !
>
>
> Some additional details about the repositories:
>
> ---------------------------------------
>
> # cat /etc/yum.repos.d/dell-system-update.repo
> [dell-system-update_independent]
> name=dell-system-update_independent
> baseurl=http://linux.dell.com/repo/hardware/dsu/os_independent/
> gpgcheck=1
> gpgkey=http://linux.dell.com/repo/hardware/dsu/public.key
> enabled=1
> exclude=dell-system-update*.i386
>
> [dell-system-update_dependent]
> name=dell-system-update_dependent
> mirrorlist=http://linux.dell.com/repo/hardware/dsu/mirrors.cgi?osname=el$releasever&basearch=$basearch&native=1
> gpgcheck=1
> gpgkey=http://linux.dell.com/repo/hardware/dsu/public.key
> enabled=1
>
> -------------------------------
>
> # cat /etc/yum.repos.d/dell-omsa-repository.repo
> [dell-omsa-indep]
> name=Dell OMSA repository - Hardware independent
> type=rpm-md
> mirrorlist=http://linux.dell.com/repo/hardware/latest/mirrors.cgi?osname=el$releasever&basearch=$basearch&native=1&dellsysidpluginver=$dellsysidpluginver
> gpgcheck=1
> gpgkey=http://linux.dell.com/repo/hardware/latest/RPM-GPG-KEY-dell
>      http://linux.dell.com/repo/hardware/latest/RPM-GPG-KEY-libsmbios
> enabled=1
> failover=priority
> bootstrapurl=http://linux.dell.com/repo/hardware/latest/bootstrap.cgi
>
>
> [dell-omsa-specific]
> name=Dell OMSA repository - Hardware specific
> type=rpm-md
> mirrorlist=http://linux.dell.com/repo/hardware/latest/mirrors.cgi?osname=el$releasever&basearch=$basearch&native=1&sys_ven_id=$sys_ven_id&sys_dev_id=$sys_dev_id&dellsysidpluginver=$dellsysidpluginver
> gpgcheck=1
> gpgkey=http://linux.dell.com/repo/hardware/latest/RPM-GPG-KEY-dell
>      http://linux.dell.com/repo/hardware/latest/RPM-GPG-KEY-libsmbios
> enabled=1
> failover=priority
> bootstrapurl=http://linux.dell.com/repo/hardware/latest/bootstrap.cgi
>
> ---------------------------------------
>
> Reading this page
>
> http://linux.dell.com/repo/hardware/dsu/
>
> I don't understand if the problem is related to the use of OMSA
> repository (it seems that was replaced py DSU repositories).
>
> Thanks in advance
>
> _______________________________________________
> Linux-PowerEdge mailing list
> [email protected]
> https://lists.us.dell.com/mailman/listinfo/linux-poweredge
>

_______________________________________________
Linux-PowerEdge mailing list
[email protected]
https://lists.us.dell.com/mailman/listinfo/linux-poweredge
boutilpj.vcf (text/x-vcard, 286 B) 
begin:vcard
fn:Patrick Boutilier
n:Boutilier;Patrick
org:;Nova Scotia Department of Education
adr:;;2021 Brunswick Street;Halifax;NS;B3K 2Y5;Canada
email;internet:[email protected]
title:WAN Communications Specialist
tel;work:902-424-6800
tel;fax:902-424-0874
version:2.1
end:vcard
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.