Re: Talking to DRAC card from OS

Mauricio Tavares <[email protected]>
Newsgroups gmane.linux.hardware.dell.poweredge
Message-ID <CAHEKYV7ZgVOGNDZZ7=0MjhWrnjzZ5vfgd0ARQQ8y2_MfLN6dbA@mail.gmail.com>
On Thu, Apr 28, 2016 at 3:05 PM, Jeff Palmer <[email protected]> wrote:
> The two utilities you'll primarily want to play with will be omreport
> and omconfig.
>
> using omreport, you can see the current status   with omconfig, you
> can change it.
>
>
> omreport chassis remoteaccess -?
>
      Thanks for the info! I now can see!

[root@vhmost3 ~]# omreport chassis remoteaccess config=nic
LAN Configuration

NIC Configuration
Enable NIC                    : true
Primary Network               : LOM2
Failover Network              : None
MAC Address                   : 44-A8-42-AC-FF-D6
Enable IPMI Over LAN          : false
Channel Privilege Level Limit : Administrator
New Encryption Key            : 0000000000000000000000000000000000000000

VLAN Tag
Enable VLAN ID : false
VLAN ID        : 1
Priority       : 0

IPv4 Address
IP Address Source : Static
IP Address        : 172.22.134.71
Subnet Mask       : 255.255.255.192
Gateway Address   : 172.22.135.65

[root@vhmost3 ~]#

Some thoughts:

1) 172.22.134.71 is on the same vlan as the IP I ssh into machine.
Gateway and netmask are right.
2) It should be vlan 304/tagged, not 1/untagged
3) I am the one who moved it from being in an untagged vlan (1) to a
tagged one (304). I know I did not mess with the drac when I did that.
4) Who is LOM2? This box has 3 NICs: 2 normal (ending with :D4 and
:D5; the rest of the MAC address for the other 2 nics matches the
above) and the drac one. Is there a naming convention (Maybe LOM0, 1,
and 2)? If it is, how could the card match it since it was purchased
later?



>
>
> On Thu, Apr 28, 2016 at 7:29 AM, Mauricio Tavares <[email protected]> wrote:
>>       I deployed a card to one of our poweredges E320 and when I tried
>> to connect to it using its ethernet port, I get no connectivity in
>> said port. So, since the host runs Linux and has openmanager, I was
>> thinking on trying to connect to it from the OS and figure out what is
>> going on. How can I do the deed?
>>
>> _______________________________________________
>> Linux-PowerEdge mailing list
>> [email protected]
>> https://lists.us.dell.com/mailman/listinfo/linux-poweredge
>
>
>
> --
> Jeff Palmer
> https://PalmerIT.net
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.