Re: OMSA 8.3.0 not starting or segfaulting

Hi Chandra,

this is the output:

# strace -f ./dchcfg command=getsystype
execve("./dchcfg", ["./dchcfg", "command=getsystype"], [/* 36 vars */]) = 0
brk(0)                                  = 0x1dd2000
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f60e63c4000
access("/etc/ld.so.preload", R_OK)      = -1 ENOENT (No such file or directory)
open("/etc/ld.so.cache", O_RDONLY)      = 3
fstat(3, {st_mode=S_IFREG|0644, st_size=110432, ...}) = 0
mmap(NULL, 110432, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f60e63a9000
close(3)                                = 0
open("/opt/dell/srvadmin/lib64/libdchcfl.so.8", O_RDONLY) = 3
read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0 \230\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=613566, ...}) = 0
mmap(NULL, 2271824, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f60e617e000
mprotect(0x7f60e61a8000, 2097152, PROT_NONE) = 0
mmap(0x7f60e63a8000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2a000) = 0x7f60e63a8000
close(3)                                = 0
open("/lib64/libdl.so.2", O_RDONLY)     = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\340\r\0@9\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=22536, ...}) = 0
mmap(0x3940000000, 2109696, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x3940000000
mprotect(0x3940002000, 2097152, PROT_NONE) = 0
mmap(0x3940202000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0x3940202000
close(3)                                = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f60e617d000
open("/lib64/libpthread.so.0", O_RDONLY) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0000^\300?9\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=145936, ...}) = 0
mmap(0x393fc00000, 2212848, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x393fc00000
mprotect(0x393fc17000, 2097152, PROT_NONE) = 0
mmap(0x393fe17000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x17000) = 0x393fe17000
mmap(0x393fe19000, 13296, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x393fe19000
close(3)                                = 0
open("/lib64/libm.so.6", O_RDONLY)      = 3
read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0p>\200?9\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=599392, ...}) = 0
mmap(0x393f800000, 2633912, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x393f800000
mprotect(0x393f883000, 2093056, PROT_NONE) = 0
mmap(0x393fa82000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x82000) = 0x393fa82000
close(3)                                = 0
open("/lib64/libc.so.6", O_RDONLY)      = 3
read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0p\356A?9\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=1926520, ...}) = 0
mmap(0x393f400000, 3750152, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x393f400000
mprotect(0x393f58a000, 2097152, PROT_NONE) = 0
mmap(0x393f78a000, 20480, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x18a000) = 0x393f78a000
mmap(0x393f78f000, 18696, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x393f78f000
close(3)                                = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f60e617c000
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f60e617b000
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f60e617a000
arch_prctl(ARCH_SET_FS, 0x7f60e617b700) = 0
mprotect(0x393f78a000, 16384, PROT_READ) = 0
mprotect(0x393fa82000, 4096, PROT_READ) = 0
mprotect(0x393fe17000, 4096, PROT_READ) = 0
mprotect(0x3940202000, 4096, PROT_READ) = 0
mprotect(0x393f21f000, 4096, PROT_READ) = 0
munmap(0x7f60e63a9000, 110432)          = 0
set_tid_address(0x7f60e617b9d0)         = 966829
set_robust_list(0x7f60e617b9e0, 24)     = 0
futex(0x7ffd9570474c, FUTEX_WAKE_PRIVATE, 1) = 0
futex(0x7ffd9570474c, FUTEX_WAIT_BITSET_PRIVATE|FUTEX_CLOCK_REALTIME, 1, NULL, 7f60e617b700) = -1 EAGAIN (Resource temporarily unavailable)
rt_sigaction(SIGRTMIN, {0x393fc05cb0, [], SA_RESTORER|SA_SIGINFO, 0x393fc0f7e0}, NULL, 8) = 0
rt_sigaction(SIGRT_1, {0x393fc05d40, [], SA_RESTORER|SA_RESTART|SA_SIGINFO, 0x393fc0f7e0}, NULL, 8) = 0
rt_sigprocmask(SIG_UNBLOCK, [RTMIN RT_1], NULL, 8) = 0
getrlimit(RLIMIT_STACK, {rlim_cur=10240*1024, rlim_max=RLIM64_INFINITY}) = 0
prctl(PR_SET_UNALIGN, NOPRINT)          = -1 EINVAL (Invalid argument)
rt_sigaction(SIGINT, {0x407f30, [INT], SA_RESTORER|SA_RESTART, 0x393f4326a0}, {SIG_DFL, [], 0}, 8) = 0
rt_sigaction(SIGTERM, {0x407f30, [TERM], SA_RESTORER|SA_RESTART, 0x393f4326a0}, {SIG_DFL, [], 0}, 8) = 0
brk(0)                                  = 0x1dd2000
brk(0x1df3000)                          = 0x1df3000
semget(IPC_PRIVATE, 1, IPC_CREAT|IPC_EXCL|0600) = -1 ENOSPC (No space left on device)
--- SIGSEGV {si_signo=SIGSEGV, si_code=SEGV_MAPERR, si_addr=0} ---
+++ killed by SIGSEGV +++
Segmentation fault

Regards,
Stefan

> Thanks Stefan for these details. Your server is Dell Branded. Can you please run
> the following command and send me the response?
> 
> cd /opt/dell/srvadmin/sbin
> strace -f ./dchcfg command=getsystype
> 
> Regards
> Chandra
> 
> -----Original Message-----
> From: Dietrich, Stefan [mailto:[email protected]]
> Sent: Friday, April 29, 2016 12:52 PM
> To: R, Chandrasekhar
> Cc: linux-poweredge-Lists
> Subject: Re: OMSA 8.3.0 not starting or segfaulting
> 
> Hi Chandra,
> 
> they should be Dell brand (?). This is from a R430 with a segfault:
> 
> # smbios-sys-info-lite
> Libsmbios: 2.2.27
> System ID: 0x0639
> Service Tag:
> Express Service Code:
> Aset Tag:
> Product Name: PowerEdge R430
> BIOS Version: 1.2.6
> Vendor: Dell Inc.
> Is Dell: 1
> OEM String 1: Dell System
> OEM String 2: 5[0000]
> OEM String 3: 14[1]
> OEM String 4: 17[537D0FC5205BB363]
> OEM String 5: 17[537BA7D240AC7A6C]
> OEM String 6: 18[0]
> OEM String 7: 19[1]
> OEM String 8: 19[1]
> 
> I have removed the service and asset tag information.
> 
> Regards,
> Stefan
> 
>> Hi Stefan,
>>
>> Are you seeing this segfault issue on Re-branded servers or Dell brand as well?
>> Please get us the following command response on failing system:
>>
>> smbios-sys-info-lite
>>
>> Regards
>> Chandra
>>
>>