Re: OMSA 8.3.0 not starting or segfaulting

Hi Chandra,

not the whole log, but I ran a tail -f during startup.
There is not much information logged during the startup:

Apr 29 14:05:13 XX instsvcdrv: dell_rbu device driver loaded
Apr 29 14:07:49 XX kernel: usb 1-1.6.2: new high speed USB device number 77 using ehci_hcd
Apr 29 14:07:49 XX kernel: usb 1-1.6.2: New USB device found, idVendor=0624, idProduct=0250
Apr 29 14:07:49 XX kernel: usb 1-1.6.2: New USB device strings: Mfr=4, Product=5, SerialNumber=6
Apr 29 14:07:49 XX kernel: usb 1-1.6.2: Product: Mass Storage Function
Apr 29 14:07:49 XX kernel: usb 1-1.6.2: Manufacturer: Avocent
Apr 29 14:07:49 XX kernel: usb 1-1.6.2: SerialNumber: 20120731
Apr 29 14:07:49 XX kernel: usb 1-1.6.2: configuration #1 chosen from 1 choice
Apr 29 14:07:49 XX kernel: scsi3438 : SCSI emulation for USB Mass Storage devices
Apr 29 14:07:50 XX kernel: scsi 3438:0:0:0: Direct-Access     iDRAC    SECUPD           0329 PQ: 0 ANSI: 0 CCS
Apr 29 14:07:50 XX kernel: sd 3438:0:0:0: Attached scsi generic sg1 type 0
Apr 29 14:07:50 XX kernel: sd 3438:0:0:0: [sdb] 2112 512-byte logical blocks: (1.08 MB/1.03 MiB)
Apr 29 14:07:50 XX kernel: sd 3438:0:0:0: [sdb] Write Protect is off
Apr 29 14:07:50 XX kernel: sd 3438:0:0:0: [sdb] Assuming drive cache: write through
Apr 29 14:07:51 XX kernel: sd 3438:0:0:0: [sdb] Assuming drive cache: write through
Apr 29 14:07:51 XX kernel: sdb:
Apr 29 14:07:51 XX kernel: sd 3438:0:0:0: [sdb] Assuming drive cache: write through
Apr 29 14:07:51 XX kernel: sd 3438:0:0:0: [sdb] Attached SCSI removable disk

Regards,
Stefan

> Hi Stefan,
> 
> Please share us the /var/log/messages while starting the OMSA services.
> 
> Regards
> Chandra
> 
> -----Original Message-----
> From: Dietrich, Stefan [mailto:[email protected]]
> Sent: Friday, April 29, 2016 4:12 PM
> To: Bose, Souvik
> Cc: R, Chandrasekhar ; linux-poweredge-Lists
> Subject: Re: OMSA 8.3.0 not starting or segfaulting
> 
> Yes, this line is commented out in our current deployment.
> As I said, most of the machines are working.
> There is just a bunch of machines, were OMSA refuses to work.
> 
>> Dell - Internal Use - Confidential
>> Did you comment out loading psrvil library in stsvc.ini file?
>>
>> Thanks
> > Souvik