Re: OMSA 8.3.0 on Ubuntu broken?
Achim Bohnet <[email protected]>
| Newsgroups | gmane.linux.hardware.dell.poweredge |
|---|---|
| Message-ID | <1574191.yhHmIxzdpz@allee> |
Am Monday, 9 May 2016, 08:35:40 CEST schrieb Dietrich, Stefan:
> Hello,
>
> since 2016-05-04, OMSA 8.3.0 for Ubuntu in the community repository seems to
> be available. However, the release looks somehow incomplete, e.g. the
> meta-packages srvadmin-base or srvadmin-all are absent. Even a clean
> installation results into an error:
Same here :-(
Unfortunetely a double QA disaster off Dell:
1) putting archive with missing (meta) pkgs online
2) allow that apt-upgrade to breaks installations (webpage list dist-
upgrade as required)
Second point could and should be solved with pkg dependencies. No srvadmi*
pkg in hold back and not upgraded on apt upgrade.
Now back to repair my broken OMSA installations :-(
Achim
>
> # aptitude install srvadmin-storage-cli
> The following NEW packages will be installed:
> libopenipmi0{a} libsmbios2{a} libsysfs2{a} openipmi{a} python-libsmbios{a}
> smbios-utils{a} srvadmin-deng{a} srvadmin-hapi{a} srvadmin-isvc{a}
> srvadmin-nvme{a} srvadmin-omacore{a} srvadmin-omacs{a} srvadmin-omilcore{a}
> srvadmin-ominst{a} srvadmin-smcommon{a} srvadmin-storage{a}
> srvadmin-storage-cli srvadmin-storelib{a} srvadmin-storelib-sysfs{a}
> srvadmin-xmlsup{a} 0 packages upgraded, 20 newly installed, 0 to remove and
> 0 not upgraded. Need to get 0 B/5.827 kB of archives. After unpacking 37,2
> MB will be used. Do you want to continue? [Y/n/?] y
> Selecting previously unselected package libsysfs2:amd64.
> (Reading database ... 387501 files and directories currently installed.)
> Preparing to unpack .../libsysfs2_2.1.0+repack-3ubuntu1_amd64.deb ...
> Unpacking libsysfs2:amd64 (2.1.0+repack-3ubuntu1) ...
> Selecting previously unselected package libsmbios2.
> Preparing to unpack .../libsmbios2_2.2.28-2_amd64.deb ...
> Unpacking libsmbios2 (2.2.28-2) ...
> Selecting previously unselected package python-libsmbios.
> Preparing to unpack .../python-libsmbios_2.2.28-2_all.deb ...
> Unpacking python-libsmbios (2.2.28-2) ...
> Selecting previously unselected package smbios-utils.
> Preparing to unpack .../smbios-utils_2.2.28-2_amd64.deb ...
> Unpacking smbios-utils (2.2.28-2) ...
> Selecting previously unselected package srvadmin-omilcore.
> Preparing to unpack .../srvadmin-omilcore_8.3.0_all.deb ...
> Unpacking srvadmin-omilcore (8.3.0) ...
> Selecting previously unselected package srvadmin-deng.
> Preparing to unpack .../srvadmin-deng_8.3.0-1_amd64.deb ...
> Unpacking srvadmin-deng (8.3.0-1) ...
> Selecting previously unselected package libopenipmi0.
> Preparing to unpack .../libopenipmi0_2.0.18-0ubuntu7.1_amd64.deb ...
> Unpacking libopenipmi0 (2.0.18-0ubuntu7.1) ...
> Selecting previously unselected package openipmi.
> Preparing to unpack .../openipmi_2.0.18-0ubuntu7.1_amd64.deb ...
> Unpacking openipmi (2.0.18-0ubuntu7.1) ...
> Selecting previously unselected package srvadmin-hapi.
> Preparing to unpack .../srvadmin-hapi_8.3.0-1_amd64.deb ...
> Unpacking srvadmin-hapi (8.3.0-1) ...
> Selecting previously unselected package srvadmin-isvc.
> Preparing to unpack .../srvadmin-isvc_8.3.0-1_amd64.deb ...
> Unpacking srvadmin-isvc (8.3.0-1) ...
> Processing triggers for ureadahead (0.100.0-16) ...
> Processing triggers for man-db (2.6.7.1-1ubuntu1) ...
> Setting up libsysfs2:amd64 (2.1.0+repack-3ubuntu1) ...
> Processing triggers for libc-bin (2.19-0ubuntu6.7) ...
> Selecting previously unselected package srvadmin-storelib-sysfs.
> (Reading database ... 388442 files and directories currently installed.)
> Preparing to unpack .../srvadmin-storelib-sysfs_8.3.0_amd64.deb ...
> Unpacking srvadmin-storelib-sysfs (8.3.0) ...
> Selecting previously unselected package srvadmin-storelib.
> Preparing to unpack .../srvadmin-storelib_8.3.0_amd64.deb ...
> Unpacking srvadmin-storelib (8.3.0) ...
> Selecting previously unselected package srvadmin-smcommon.
> Preparing to unpack .../srvadmin-smcommon_8.3.0_amd64.deb ...
> Unpacking srvadmin-smcommon (8.3.0) ...
> Selecting previously unselected package srvadmin-nvme.
> Preparing to unpack .../srvadmin-nvme_8.3.0_amd64.deb ...
> Unpacking srvadmin-nvme (8.3.0) ...
> Selecting previously unselected package srvadmin-omacs.
> Preparing to unpack .../srvadmin-omacs_8.3.0-2_amd64.deb ...
> Unpacking srvadmin-omacs (8.3.0-2) ...
> Selecting previously unselected package srvadmin-xmlsup.
> Preparing to unpack .../srvadmin-xmlsup_8.3.0-1_amd64.deb ...
> Unpacking srvadmin-xmlsup (8.3.0-1) ...
> Setting up libsmbios2 (2.2.28-2) ...
> Setting up python-libsmbios (2.2.28-2) ...
> Setting up smbios-utils (2.2.28-2) ...
> Setting up srvadmin-omilcore (8.3.0) ...
> **********************************************************
> After the install process completes, you may need
> to log out and then log in again to reset the PATH
> variable to access the Dell OpenManage CLI utilities
> **********************************************************
> Setting up srvadmin-deng (8.3.0-1) ...
> 26 files processed
> 7 files processed
> OS SNMP support not installed
> update-rc.d: warning: default start runlevel arguments (2 3 4 5) do not
> match dataeng Default-Start values (3 5) update-rc.d: warning: default stop
> runlevel arguments (0 1 6) do not match dataeng Default-Stop values (1 2)
> Adding system startup for /etc/init.d/dataeng ...
> /etc/rc0.d/K20dataeng -> ../init.d/dataeng
> /etc/rc1.d/K20dataeng -> ../init.d/dataeng
> /etc/rc6.d/K20dataeng -> ../init.d/dataeng
> /etc/rc2.d/S20dataeng -> ../init.d/dataeng
> /etc/rc3.d/S20dataeng -> ../init.d/dataeng
> /etc/rc4.d/S20dataeng -> ../init.d/dataeng
> /etc/rc5.d/S20dataeng -> ../init.d/dataeng
> Setting up libopenipmi0 (2.0.18-0ubuntu7.1) ...
> Setting up openipmi (2.0.18-0ubuntu7.1) ...
> Setting up srvadmin-hapi (8.3.0-1) ...
> Setting up srvadmin-isvc (8.3.0-1) ...
> 56 files processed
> 6 files processed
> 23 files processed
> Processing triggers for libc-bin (2.19-0ubuntu6.7) ...
> Selecting previously unselected package srvadmin-storage.
> (Reading database ... 389409 files and directories currently installed.)
> Preparing to unpack .../srvadmin-storage_8.3.0_amd64.deb ...
> Unpacking srvadmin-storage (8.3.0) ...
> Selecting previously unselected package srvadmin-ominst.
> Preparing to unpack .../srvadmin-ominst_8.3.0-1_amd64.deb ...
> Unpacking srvadmin-ominst (8.3.0-1) ...
> Selecting previously unselected package srvadmin-omacore.
> Preparing to unpack .../srvadmin-omacore_8.3.0-1_amd64.deb ...
> Unpacking srvadmin-omacore (8.3.0-1) ...
> Selecting previously unselected package srvadmin-storage-cli.
> Preparing to unpack .../srvadmin-storage-cli_8.3.0_amd64.deb ...
> Unpacking srvadmin-storage-cli (8.3.0) ...
> Setting up srvadmin-storelib-sysfs (8.3.0) ...
> update-alternatives: using /lib/x86_64-linux-gnu/libsysfs.so.2 to provide
> /opt/lsi/3rdpartylibs/x86_64/libsysfs.so (srvadmin-storelib-sysfs) in auto
> mode update-alternatives: warning: not replacing
> /opt/lsi/3rdpartylibs/x86_64/libsysfs.so with a link Setting up
> srvadmin-storelib (8.3.0) ...
> Setting up srvadmin-smcommon (8.3.0) ...
> Setting up srvadmin-nvme (8.3.0) ...
> Setting up srvadmin-omacs (8.3.0-2) ...
> Setting up srvadmin-xmlsup (8.3.0-1) ...
> Setting up srvadmin-storage (8.3.0) ...
> Setting up srvadmin-ominst (8.3.0-1) ...
> Setting up srvadmin-omacore (8.3.0-1) ...
> Setting up srvadmin-storage-cli (8.3.0) ...
> /opt/dell/srvadmin/lib64/srvadmin-storage/register-storage-cli.sh: line 15:
> /opt/dell/srvadmin//lib64/srvadmin-omacore/cli_ini_modifier.sh: Permission
> denied /opt/dell/srvadmin/lib64/srvadmin-storage/register-storage-cli.sh:
> line 19: /opt/dell/srvadmin//lib64/srvadmin-omacore/cli_ini_modifier.sh:
> Permission denied Processing triggers for libc-bin (2.19-0ubuntu6.7) ...
>
> # omreport chassis bios
> I/O warning : failed to load external entity
> "/opt/dell/srvadmin/var/lib/openmanage/xslroot//hip/common/BIOSView.xsl"
> error
> xsltParseStylesheetFile : cannot parse
> /opt/dell/srvadmin/var/lib/openmanage/xslroot//hip/common/BIOSView.xsl
> Error! XML Transformation failed
>
>
> The cli_ini_modifier.sh seems to have the wrong permissions, it should be
> 755: # ll /opt/dell/srvadmin//lib64/srvadmin-omacore/cli_ini_modifier.sh
> -rw-r--r-- 1 root root 13865 Jan 4 13:30
> /opt/dell/srvadmin//lib64/srvadmin-omacore/cli_ini_modifier.sh
>
> Changing the permissions and rerunning the script fails as well:
> # sh /opt/dell/srvadmin/lib64/srvadmin-storage/register-storage-cli.sh
> /opt/dell/srvadmin/lib64/srvadmin-storage/register-storage-cli.sh: 6:
> /opt/dell/srvadmin/lib64/srvadmin-storage/register-storage-cli.sh: source:
> not found
> /opt/dell/srvadmin/lib64/srvadmin-storage/register-storage-cli.sh: 9:
> /opt/dell/srvadmin/lib64/srvadmin-storage/register-storage-cli.sh:
> GetSysId: not found
> /opt/dell/srvadmin//lib64/srvadmin-omacore/cli_ini_modifier.sh: 62:
> /opt/dell/srvadmin//lib64/srvadmin-omacore/cli_ini_modifier.sh: function:
> not foun
>
>
> The init script /opt/dell/srvadmin/sbin/srvadmin-services.sh is absent as
> well. Starting the dataeng via "service dataeng start" works, but I am
> still seeing the XML errors. Although srvadmin-xmlsup is installed.
>
> Any ideas?
>
> Regards,
> Stefan
>
> --
> ------------------------------------------------------------------------
> Stefan Dietrich Deutsches Elektronen-Synchrotron (IT-Systems)
> Ein Forschungszentrum der Helmholtz-Gemeinschaft
> Notkestr. 85
> phone: +49-40-8998-4696 22607 Hamburg
> e-mail: [email protected] Germany
> ------------------------------------------------------------------------
>
> _______________________________________________
> Linux-PowerEdge mailing list
> [email protected]
> https://lists.us.dell.com/mailman/listinfo/linux-poweredge
--
To me vi is Zen. To use vi is to practice zen. Every command is
a koan. Profound to the user, unintelligible to the uninitiated.
You discover truth everytime you use it.
-- [email protected]