idrac7 - insufficient resources for session

Audin Maurice <[email protected]> Mon, 4 Jul 2016 16:31:38 +0200

Newsgroups	gmane.linux.hardware.dell.poweredge
Message-ID	<[email protected]>

Hi everyone,

I work with Dell servers and have a common issue on some of them. I'm using
ipmitool to handle the iDrac 7 modules and recently, I receive this message:


$ ipmitool -I lanplus -U root -P *** -H *** bmc info
Error in open session response message : insufficient resources for session

Error: Unable to establish IPMI v2 / RMCP+ session


while on the others (exact same hardware and software configuration):


$ ipmitool -I lanplus -U root -P *** -H *** bmc info
Device ID                 : 32
Device Revision           : 1
Firmware Revision         : 1.35
IPMI Version              : 2.0
Manufacturer ID           : 674
Manufacturer Name         : DELL Inc
Product ID                : 256 (0x0100)
Product Name              : Unknown (0x100)
Device Available          : yes
Provides Device SDRs      : yes
Additional Device Support :
    Sensor Device
    SDR Repository Device
    SEL Device
    FRU Inventory Device
    IPMB Event Receiver
    Bridge
    Chassis Device
Aux Firmware Rev Info     :
    0x00
    0x07
    0x23
    0x00


I still have access to the web interface, reseted iDrac, but I always get the
same error.

I can't easily install racadm (depends on libssl 0.9) and couldn't find the
correct file to upgrade the firmware on Dell download pages.

Any one already had this issue ?
Maurice

_______________________________________________
Linux-PowerEdge mailing list
[email protected]
https://lists.us.dell.com/mailman/listinfo/linux-poweredge

signature.asc (application/pgp-signature, 473 B)