Broken GPIB

"Bishop, Mark \(STRT\) via Linux-gpib-general" <[email protected]>
Newsgroups gmane.linux.hardware.gpib.general
Message-ID <[email protected]>
I had this working a few weeks ago and now it isn't.  Does this make any sense to anyone?

I have a NI USB dongle attached to my system and this is what I am getting:
(Not working)
Feb 20 08:13:31 stride kernel: [2390014.354592] usb 1-4.1: new high-speed USB device number 64 using xhci_hcd
Mar 13 12:55:19 stride kernel: [10756.520854] usb 1-2: new high-speed USB device number 15 using xhci_hcd
Mar 13 12:55:19 stride kernel: [10756.875157] usb 1-2: New USB device found, idVendor=3923, idProduct=709b
Mar 13 12:55:19 stride kernel: [10756.875158] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Mar 13 12:55:19 stride kernel: [10756.875159] usb 1-2: Product: GPIB-USB-HS
Mar 13 12:55:19 stride kernel: [10756.875160] usb 1-2: Manufacturer: National Instruments
Mar 13 12:55:19 stride kernel: [10756.875161] usb 1-2: SerialNumber: 01C300DD
Mar 13 12:55:19 stride kernel: [10756.999293] ni_usb_gpib: probe succeeded for path: usb-0000:03:00.0-2
Mar 13 12:55:19 stride mtp-probe: checking bus 1, device 15: "/sys/devices/pci0000:00/0000:00:15.0/0000:03:00.0/usb1/1-2"
Mar 13 12:55:19 stride mtp-probe: bus: 1, device: 15 was not an MTP device
Mar 13 12:55:34 stride kernel: [10592.110439] gpib: no gpib board configured on /dev/gpib0

(Working)
Feb 20 08:13:31 stride kernel: [2390014.354592] usb 1-4.1: new high-speed USB device number 64 using xhci_hcd
Feb 20 08:13:31 stride kernel: [2390014.601458] usb 1-4.1: New USB device found, idVendor=3923, idProduct=709b
Feb 20 08:13:31 stride kernel: [2390014.601460] usb 1-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Feb 20 08:13:31 stride kernel: [2390014.601461] usb 1-4.1: Product: GPIB-USB-HS
Feb 20 08:13:31 stride kernel: [2390014.601462] usb 1-4.1: Manufacturer: National Instruments
Feb 20 08:13:31 stride kernel: [2390014.601462] usb 1-4.1: SerialNumber: 012E5518
Feb 20 08:13:31 stride kernel: [2390014.642890] ni_usb_gpib: probe succeeded for path: usb-0000:03:00.0-4.1
Feb 20 08:13:35 stride mtp-probe: checking bus 1, device 64: "/sys/devices/pci0000:00/0000:00:15.0/0000:03:00.0/usb1/1-4/1-4.1"
Feb 20 08:13:35 stride mtp-probe: checking bus 1, device 63: "/sys/devices/pci0000:00/0000:00:15.0/0000:03:00.0/usb1/1-2"
Feb 20 08:13:35 stride mtp-probe: bus: 1, device: 64 was not an MTP device
Feb 20 08:13:35 stride mtp-probe: bus: 1, device: 63 was not an MTP device
Feb 20 08:13:36 stride /usr/local/etc/hotplug/usb/ni_usb_gpib: entered for Product: 3923/709b/101 Device: /dev/bus/usb/001/064 Serial: 012E5518 Devpath: /devices/pci0000:00/0000:00:15.0/0000:03:00.0/usb1/1-4/1-4.1
Feb 20 08:13:36 stride kernel: [2390019.560601] gpib0: exiting autospoll thread
Feb 20 08:13:36 stride kernel: [2390019.560734] ni_usb_gpib: attach
Feb 20 08:13:36 stride kernel: [2390019.560737]         attached to bus interface 0, address 0xffff8d1690428000
Feb 20 08:13:36 stride kernel: [2390019.650587]         product id=0x709b
Feb 20 08:13:36 stride kernel: [2390019.651699] ni_usb_hs_wait_for_ready: board serial number is 0x12e5518
Feb 20 08:13:36 stride kernel: [2390019.651905] /home/mark/svn_repos/linux-gpib-code/linux-gpib-kernel/drivers/gpib/ni_usb/ni_usb_gpib.c: ni_usb_hs_wait_for_ready exit retval=0

Mark Bishop
Sr. Firmware/Software Engineer - Microwave Subsystems

[cid:[email protected]]

4726 Eisenhower Blvd.
Tampa, FL 33634
USA


T  +1 813 901 7293

[email protected]<mailto:[email protected]>

smithsinterconnect.com<http://www.smithsinterconnect.com/>

TRAK MICROWAVE IS NOW SMITHS INTERCONNECT!

_______________________________________________
Linux-gpib-general mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/linux-gpib-general
image001.png (image/png, 15 KB) - not displayed
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.