Re: Errors with module ni_usb_gpib on CentOS 7.6
Werner Liffert <[email protected]>
| Newsgroups | gmane.linux.hardware.gpib.general |
|---|---|
| Organization | RUAG Aerospace |
| Message-ID | <[email protected]> |
Am 30.04.19 um 17:27 schrieb Frank Mori Hess: > On Wed, Apr 24, 2019 at 9:06 AM Werner Liffert > <[email protected]> wrote: >> Hello >> >> I use for many years GPIB-USB-HS cards from Ni without Problems. >> Last Installation: CentOS 7.5 (kernel 3.10.0-862.11.6.el7.x86_64), >> linux-gpib-3.2.21 >> >> >> With the update from CentOS 7.5 to 7.6 (kernel >> 3.10.0-957.10.1.el7.x86_64) i receive the following error messages: >> > Try SVN or a newer release, 3.2.21 is from 2014. Do the 4.x > linux-gpib releases not compile against your kernel? > Hi after eliminate the fmh_gpibi (error: implicit declaration of function ‘of_find_node_by_path’), the linux-gpib-4.2.0 do compile without error. May 1 14:59:28 mcp21 kernel: Linux-GPIB 4.2.0 Driver May 1 14:59:34 mcp21 kernel: ni_usb_gpib driver loading May 1 14:59:34 mcp21 kernel: ni_usb_gpib: probe succeeded for path: usb-0000:00:1a.0-1.4 May 1 14:59:34 mcp21 kernel: usbcore: registered new interface driver ni_usb_gpib May 1 14:59:34 mcp21 kernel: gpib: registered ni_usb_b interface May 1 14:59:50 mcp21 kernel: ni_usb_gpib: attach May 1 14:59:50 mcp21 kernel: #011attached to bus interface 0, address 0xffff8daf0ae46000 May 1 14:59:50 mcp21 kernel: #011product id=0x709b May 1 14:59:50 mcp21 kernel: ni_usb_hs_wait_for_ready: board serial number is 0x13cc599 May 1 14:59:50 mcp21 kernel: /usr/share/linux-gpib-4.2.0/linux-gpib-kernel-4.2.0/drivers/gpib/ni_usb/ni_usb_gpib.c: ni_usb_hs_wait_for_ready exit retval=0 Now i receive on the first ibwrt-command an error: returnvalue=8100 iberr=0 errno=25 Any idea? Kind regards Werner _______________________________________________ Linux-gpib-general mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/linux-gpib-general