Re: Strange errors with NI GPIB-USB-HS

> Hi Jakub,
> One way to check is to look at: the output of the syslog lines with "gpib" in them and the output of "lsusb -d 3923:",  with the adapter plugged in.
> cheers,
> -dave


Hello

First of all, I wrote that the device is working with windows, but the 
part I omitted is - windows is running in qemu on the same machine, 
where I'm testing the linux-gpib.

I can't show you the syslog output, because I have now installed the 
closed source driver and appropriate software from National Instruments 
(which I don't want to use in the end, but I use it now as a sanity 
check only).

The lsusb output is:
$ lsusb -d 3923: -v

Bus 001 Device 020: ID 3923:709b National Instruments Corp. GPIB-USB-HS
Couldn't open device, some information will be missing
Device Descriptor:
   bLength 18
   bDescriptorType 1
   bcdUSB 2.00
   bDeviceClass 0
   bDeviceSubClass 0
   bDeviceProtocol 0
   bMaxPacketSize0 64
   idVendor 0x3923 National Instruments Corp.
   idProduct 0x709b GPIB-USB-HS
   bcdDevice 1.01
   iManufacturer 1 National Instruments
   iProduct 2 GPIB-USB-HS
   iSerial 3 019BF124
   bNumConfigurations 1
   Configuration Descriptor:
     bLength 9
     bDescriptorType 2
     wTotalLength 0x0035
     bNumInterfaces 1
     bConfigurationValue 1
     iConfiguration 0
     bmAttributes 0x80
       (Bus Powered)
     MaxPower 500mA
     Interface Descriptor:
       bLength 9
       bDescriptorType 4
       bInterfaceNumber 0
       bAlternateSetting 0
       bNumEndpoints 5
       bInterfaceClass 255 Vendor Specific Class
       bInterfaceSubClass 0
       bInterfaceProtocol 0
       iInterface 0
       Endpoint Descriptor:
         bLength 7
         bDescriptorType 5
         bEndpointAddress 0x02 EP 2 OUT
         bmAttributes 2
           Transfer Type Bulk
           Synch Type None
           Usage Type Data
         wMaxPacketSize 0x0200 1x 512 bytes
         bInterval 0
       Endpoint Descriptor:
         bLength 7
         bDescriptorType 5
         bEndpointAddress 0x06 EP 6 OUT
         bmAttributes 2
           Transfer Type Bulk
           Synch Type None
           Usage Type Data
         wMaxPacketSize 0x0200 1x 512 bytes
         bInterval 0
       Endpoint Descriptor:
         bLength 7
         bDescriptorType 5
         bEndpointAddress 0x81 EP 1 IN
         bmAttributes 3
           Transfer Type Interrupt
           Synch Type None
           Usage Type Data
         wMaxPacketSize 0x0010 1x 16 bytes
         bInterval 0
       Endpoint Descriptor:
         bLength 7
         bDescriptorType 5
         bEndpointAddress 0x84 EP 4 IN
         bmAttributes 2
           Transfer Type Bulk
           Synch Type None
           Usage Type Data
         wMaxPacketSize 0x0200 1x 512 bytes
         bInterval 0
       Endpoint Descriptor:
         bLength 7
         bDescriptorType 5
         bEndpointAddress 0x88 EP 8 IN
         bmAttributes 2
           Transfer Type Bulk
           Synch Type None
           Usage Type Data
         wMaxPacketSize 0x0200 1x 512 bytes
         bInterval 0

If you see something strange here, please let me know.

Thank you.

Jakub Ladman