[tlinux-users:07432] Re: Satellite P25-S670 acpi
Gonzalo Nemmi <[email protected]>
| Newsgroups | gmane.linux.hardware.toshiba |
|---|---|
| Message-ID | <[email protected]> |
I'm willing to bet that P25s have a Phoneix BIOS, just as my P15 does ...
In order to get most of your laptop features, you will need to download,
compile and load the "omnibook kernel module"
I kwon it may come as kind of a shocking surprise, but notebooks like
yours an my, appear to be created by "other" company and just/only
branded by Toshiba. You can find some really interesting posts on this
list about that subject.
Here's the sourceforge proyect for the omnibok kernel module ("omke"):
http://sourceforge.net/projects/omke/
And this is the file you should download:
http://sourceforge.net/project/showfiles.php?group_id=48623&package_id=47019
Development for the omibook kernel module seems to have stopped as of
2005/02/17, which is quite a pitty, given that there are plenty of this
machines on the market (not only toshibas), but it still manages to get
the work done.
So, basically, download, compile, load it using "modprobe omnibook" and
see if you get anything under /proc/omnibook/
Now, regarding suspend to ram/disk, is still work in progress and may
not work properly if you have an nvidia card and are using the nvidia
propietary drivers.
If you ever need a GUI interface to acces some of the features that the
omnibook kernel module provides, the give Ktoshiba CVS a try ;)
See ya!
babar haq wrote:
> Hi all
> I am running fc4 with kernel 2.6.13 but it seems like there is no acpi at all. My laptop gets heated, doesent go in standby mode. I m the sort who never shuts off his laptop. Infact a few time there were messages from syslogd saying the processor temperature is above threshold or something. I have searched a lot but cant seem to get the hang of it. Can some one guide me?
> Thanx in advance.
>
> Babar
>