[tlinux-users:07845] Re: Problems with my satellite A105

Hi Celso and everybody ,

I've changed my fedora core from 3  to 5 .It haven't been shutdown for no reason yet !!! (is there any relation betwen shutting down and fedora version ??!!)

Now I have a new problem with my eth0 controller  : I can connect to internet and also can scp from my laptop to anothers but I can not ssh !!!and nobody can't scp to me !!!

P.S: When I try ssh it goes for example to 50% and my ethernet become Idle at all after that when I try "service network restart" the ethernet again become active !!

Any Solution ??!!!
 
Best Regard ,
Saba

Celso Yoshikazu Ishida <[email protected]> wrote: Hi Saba,

really? I have return from the store. I ask back for my money. But,
I'm waiting for the answer.

I cant' see the file with koqueror or ls too. But, If I use the more
/proc/acpi/fan/... There is a file with a zero bit.

Have you recompile your kernel?
And your computer continues to shut downs for no reason?

Thanks agains

Celso

On 5/29/06, saba ardeshiri  wrote:
>
> Hi Celso ,
>
> When I tried /proc/acpi/fan/ there is nothing in this folder but Iit seems
> that my cooler is working and I have no propblem with it in fedora core 5 !!
>
> Saba
>
>
> Celso Yoshikazu Ishida  wrote:
>
> Hi!.
>
> I have the same computer satellite A105-S361 but I have the Fedora Core 5.
> The main problem is the cooler. It doesn't work for me. I tryed many
> things. But, I'm giving up. I'll change my Toshiba for a HP notebook
> in the next weak, if it doesn't work.
>
> Below, same answers for my problem from the list. Maybe It can help
> you. If your cooler is working, please, advise me, then I'll not
> change my computer.
>
> And thanks for the answers of: Vassilis, Mikkel and Howard.
>
> Obs: I think that I have the Toshiba BIOS. How can I be sure?
>
> Celso
>
>
> Vassilis Koutavas wrote: __________
>
> > Seems like overheating of the cpu to me. When you boot linux, can you
> > tell if the cpu fan is ever on? Probably your linux never turns it on
> > and your cpu is being overheated when you do some demanding task. Try
> > compiling some source distribution to see if it happens then. If
> > indeed it is cou overheating, then I suggest to find out soon how to
> > make your cpu fan work in linux, otherwise you may fry your processor,
> > like you probably did with your previous laptop!
> >
> > --Vassilis
> >
>
> from Mikkel L. Ellertson ___________________
>
> You can probably check the fan by looking at
> /proc/acpi/fan/FAN0/state. You may be able to control the fan with
> fnfx. There is also a fan program in Toshiba Utilities that may
> work. I don't know if your laptop have the Toshiba BIOS, or the
> Pheonix BIOS. They do not work with the Pheonix BIOS. (I have an
> A105-S4004, and tey do not work on it. The fan is not BIOS controlled.)
>
> Mikkel
>
>
> from Vassilis Koutavas _________________
>
> depending on your BIOS, you will need to use ACPI, or APM (I think
> fnfx works with APM). Try installing fnfx first, since it is easier.
> You can also try booting from the latest knoppix cd which has good
> acpi support and see the /proc/acpi there. If it works with knoppix
> then you need to recompile your kernel with acpi support (look for
> howto's about ACPI).
> ___________________________________
>
>
>
>
>
> ________________________________
> Do you Yahoo!?
> Everyone is raving about the all-new Yahoo! Mail Beta.
>
>



		
---------------------------------
Blab-away for as little as 1¢/min. Make  PC-to-Phone Calls using Yahoo! Messenger with Voice.