[tlinux-users:08218] wide-scream

Mrs,

I hava a Satellite A75 whith wide-scream monitor (16x9). In linux Fedora 4 
I have not option to adjust it like I wanna (1280x800).
Does someone knows how I can configure it?

thanks

Fred Belisario
----- Original Message ----- 
From: "Billy Barker" <[email protected]>
To: <[email protected]>
Sent: Saturday, October 21, 2006 2:52 AM
Subject: [tlinux-users:08217] Re: FW: Re: Fan control, Ubuntu 6.06


> Check the computer support web page on the Toshiba USA site.
> Billy
>
> On Friday 20 October 2006 13:57, Miguel Guirao wrote:
>> I do not know, but I will certainly verify it!!
>>
>> Does any body knows the model of these failed batteries?
>> Regards,
>>
>> Miguel Guirao
>>
>> -----Original Message-----
>> From: Billy Barker [mailto:[email protected]]
>> Sent: Viernes, 20 de Octubre de 2006 12:17 p.m.
>> To: [email protected]
>> Subject: [tlinux-users:08214] Re: FW: Re: Fan control, Ubuntu 6.06
>>
>>
>> I wish I had the answer to this problem, but I was unable to make the
>> temperature sensors work.
>> I have SUSE 10.1 installed on a Satelite M-45.
>> I also tried using PCLinuxOS's Live CD with no luck either.
>> I just gave up on using those tools, because I figured the hardware just
>> was not supported.
>> It is not too much of a problem for me though, my unit is never on more
>> that 45 minutes at a time.
>> Did your laptop have one of the batteries that were recalled by Apple and
>> Sony?
>> Billy
>>
>> On Friday 20 October 2006 07:09, Miguel Guirao wrote:
>> > Hi all,
>> >
>> > I'm experiencing a similar problem on my Toshiba, it looks like the
>>
>> process
>>
>> > in charge not always turn on the fan, so the laptop happens to turn off
>> > automatically. I have a dual boot, and on Windows I do not have the 
>> > same
>> > problem.
>> >
>> > Is there a way to monitor the temp? an applet?
>> >
>> > Best Regards,
>> >
>> > Miguel Guirao
>> >
>> > -----Original Message-----
>> > From: Andy Jones [mailto:[email protected]]
>> > Sent: Jueves, 19 de Octubre de 2006 10:52 p.m.
>> > To: [email protected]
>> > Subject: [tlinux-users:08212] FW: Re: Fan control, Ubuntu 6.06
>> >
>> >
>> >
>> >
>> >
>> > Hi,
>> > The sensors you mentioned, how do I get those working? (Toshiba has
>> > replaced the motherboard in my tecra s1) I don't won't to boot Ubuntu
>> > until I can have control/feedback of the temperature.
>> >
>> >
>> > thanks
>> >
>> > Andy Jones
>> >
>> > -----Original Message-----
>> > From: Paul Koufalas [mailto:[email protected]]
>> > Sent: Thursday, 14 September 2006 6:20 PM
>> > To: [email protected]
>> > Subject: [tlinux-users:08149] Re: Fan control, Ubuntu 6.06
>> >
>> > I have wondered about that. I run computer simulations on my laptop and
>> > they can take minutes or hours to complete. I'm using GNU Octave  under
>> > Ubuntu 5.10.
>> >
>> > I've seen the CPU temp stay between 70-75C (via the handy sensors
>> > applet). I put sleep() commands in my code at places in order to let 
>> > the
>> > CPU cool a bit between iterations of the simulation.
>> >
>> > Even so, if there is a problem (bug), I can sometimes come back and 
>> > find
>> > the CPU has hit 80C. It still responds to killing the simulation
>> > thankfully and cools itself back down to normal...50-55C.
>> >
>> > Perhaps because my simulations are not involving the graphics card
>> > (indeed, I blank the display rather than leave it on the funky
>> > screensaver) I haven't had a problem with it.
>> >
>> > Sorry to hear you fried the computer, Andy. (No doubt you this, but you
>> > can still get your important data off it.)
>> >
>> > Cheers
>> > Paul.
>> >
>> > Andy Jones wrote:
>> > >Hi all,
>> > >Just a quick warning regarding the temperature cutoff levels, they
>> >
>> > allow
>> >
>> > >the computer (tecra s1) to get too hot. Mine is now fried. I noticed 
>> > >it
>> > >not running as much as windows would run it, but it did still run. The
>> > >temp seemed a little higher. Now I think the graphics card has
>> > >overheated.
>> > >
>> > >Cheers
>> > >Andy
>> >
>> > Este mensaje es exclusivamente para el uso de la persona o entidad a
>> > quien esta dirigido; contiene informacion estrictamente confidencial y
>>
>> legalmente
>>
>> > protegida, cuya divulgacion es sancionada por la ley. Si el lector de
>> > este mensaje no es a quien esta dirigido, ni se trata del empleado o
>> > agente responsable de esta informacion, se le notifica por medio del
>> > presente,
>>
>> que
>>
>> > su reproduccion y distribucion, esta estrictamente prohibida. Si Usted
>> > recibio este comunicado por error, favor de notificarlo inmediatamente 
>> > al
>> > remitente y destruir el mensaje. Todas las opiniones contenidas en este
>> > mail son propias del autor del mensaje y no necesariamente coinciden 
>> > con
>> > las de Radiomovil Dipsa, S.A. de C.V. o alguna de sus empresas
>>
>> controladas,
>>
>> > controladoras, afiliadas y subsidiarias. Este mensaje intencionalmente 
>> > no
>> > contiene acentos.
>> >
>> > This message is for the sole use of the person or entity to whom it is
>> > being sent.  Therefore, it contains strictly confidential and legally
>> > protected material whose disclosure is subject to penalty by law.  If 
>> > the
>> > person reading this message is not the one to whom it is being sent
>> > and/or is not an employee or the responsible agent for this 
>> > information,
>> > this person is herein notified that any unauthorized dissemination,
>>
>> distribution
>>
>> > or copying of the materials included in this facsimile is strictly
>> > prohibited.  If you received this document by mistake please notify
>> > immediately to the subscriber and destroy the message. Any opinions
>> > contained in this e-mail are those of the author of the message and do
>> > not necessarily coincide with those of Radiomovil Dipsa, S.A. de C.V. 
>> > or
>> > any
>>
>> of
>>
>> > its control, controlled, affiliates and subsidiaries companies. No part
>> > of this message or attachments may be used or reproduced in any manner
>> > whatsoever.
>