[tlinux-users:08340] Re: SD controller

WL <[email protected]>
Newsgroups gmane.linux.hardware.toshiba
Message-ID <[email protected]> 
Hi Renato,

Try this:
> - - Insert your SD Card, and type:
> #setpci -s 02:0d.0 4c.b=02
>
> Now, load modules sdhci, mmc_block and mount /dev/mmcblk0p1
>
>
I tried from a clean reboot (modules were not loaded until after the setpci
command) and there still isn't a /dev/mmcblk0p1. dmesg says sdhci is version
0.12.
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.