[tlinux-users:08517] Re: reg:ToshibaA100-139 Fn key

Hello  Jaime ,

         Thanks alot
Its  works  sucessfully with 2.6.20   kernel   , i can
 change my  brightness level .


On 6/16/07, atul jain <[email protected]> wrote:
>
> Hello  Jaime,
>                     now i  run  make sucessfully , do not found an  error
> message , but the problem is that  when i  try to  load module
> by running
>
>      insmod  test.ko
>
> error message : insmod: error inserting 'test.ko': -1 Invalid module
> format
>
>
>
> on checking  dmesg , i found
>
> test: disagrees about version of symbol struct_module
>
>
>
>
>
>
>
>
> On 6/16/07, Jaime < [email protected]> wrote:
> >
> > Wow, plenty of errors. It seems you simply untar your kernel version,
> > but instead, you should install the kernel-sources and kernel-devel
> > packages of your distribution for your current kernel version. That's
> > why:
> >
> > Makefile:476: .config: No such file or directory
> >
> > and
> >
> > cc1: error: include/linux/autoconf.h: No such file or directory
> >
> > That files are normally present if you have really compiled and
> > installed your kernel.
> > So try to install the proper packages for your distribution.
> >
> > Good luck
> >
> > Jaime
> >
> >
> > On 6/16/07, atul jain <[email protected]> wrote:
> > > Hello  Jaime ,
> > >
> > >                        I am attaching   error file containing errors
> > that  i
> > > found
> > > while running make.
> > >
> > >
> > >
> > > On 6/16/07, Jaime < [email protected]> wrote:
> > > > atul, please post the output of the make with the errors, that will
> > be
> > > > useful, among the command itself and a ls -la
> > > >
> > > > On 6/16/07, atul jain <[email protected]> wrote:
> > > > > Hello Christian,
> > > > >
> > > > > On 6/15/07, Christian Tenllado < [email protected]> wrote:
> > > > > > Hello:
> > > > > >
> > > > > > I have followed this conversation, because I have the same
> > problem. I
> > > > > > have followed this instructions on a Toshiba A100 with a Debian
> > Sid
> > > and
> > > > > > kernel 2.6.21-1-686 kernel.
> > > > >
> > > > > i found  lots of error , while  running   make  , and when
> > i  fixed that
> > > > > errors
> > > > > which generally  related to permissions  , i
> > found  another  errors
> > > while
> > > > > again make.
> > > > > so  , if you  suggest me the steps you followed to  run
> > that  module ,
> > > it
> > > > > will  be
> > > > > helpful  for  me  as i am also  using etch  , and installed 2.6.21from
> > > > > backport .
> > > > >
> > > > >
> > > > > waiting for reply
> > > > >  Thanks in advance.
> > > > >
> > > > >
> > > > >
> > > > > --
> > > > > cheers :)
> > > > > Atul
> > > > >
> > > >
> > > >
> > >
> > > Thanks in advance
> > >
> > > --
> > >
> > > Cheers:)
> > > Atul
> > >
> >
> >
>
>
> --
>
> Cheers
> Atul




-- 

Regards
Atul