Re: Confused Newbie.

David,

What does your haresources file look like?

- Glen


On 10/18/05 10:00 PM, "ankush grover" <[email protected]> wrote:

> 
> 
> On 10/19/05, David <[email protected]> wrote:
>> Hello,
>> 
>> I have just installed hearbeat as per example
>> http://www.ultramonkey.org/3/topologies/lb-eg.html
>> 
>> The only change I have made is a VIP of 192.168.1.112 <http://192.168.1.112>
>> instead of
>> 192.168.6.240 <http://192.168.6.240>  because my private network that I am
>> testing on is 192.168.1.0 <http://192.168.1.0>
>> 
>> The config I have used is
>> 
>> # Global Directives
>> checktimeout=10
>> checkinterval=2
>> autoreload=no
>> logfile="/var/log/ldirectord.log"
>> logfile="local0"
>> quiescent=yes
>> # Virtual Server for HTTP
>> virtual= 192.168.1.112:80 <http://192.168.1.112:80>
>>         fallback=127.0.0.1:80 <http://127.0.0.1:80>
>>         real=192.168.7.4:80 <http://192.168.7.4:80>  masq
>>         service=http
>>         scheduler=rr
>>         #persistent=600
>>         protocol=tcp
>>         checktype=negotiate
>> 
>> 
>> the syslog messages when I start  are
>> 
>> Oct 19 10:52:31 temp ldirectord[1148]: Starting Linux Director
>> v1.77.2.11 as daemon
>> Oct 19 10:52:31 temp ldirectord[1150]: Added virtual server:
>> 192.168.1.112:80 <http://192.168.1.112:80>
>> Oct 19 10:52:31 temp ldirectord: Starting ldirectord succeeded
>> Oct 19 10:52:31 temp ldirectord[1150]: Quiescent real server:
>> 192.168.7.4:80 <http://192.168.7.4:80>  mapped from 192.168.7.4:80
>> <http://192.168.7.4:80>  ( x 192.168.1.112:80 <http://192.168.1.112:80> )
>> (Weight
>> set to 0)
>> 
>> ipvsadm -L -n  produces
>> 
>> IP Virtual Server version 1.0.8 (size=65536)
>> Prot LocalAddress:Port Scheduler Flags
>>   -> RemoteAddress:Port          Forward Weight ActiveConn InActConn
>> TCP  192.168.1.112:80 <http://192.168.1.112:80>  rr
>>   -> 192.168.7.4:80 <http://192.168.7.4:80>               Masq    0      0
>> 0
>> 
>> 
>> But when I point my browser at 192.168.1.112 <http://192.168.1.112>  I get a
>> "failed to connect"
>> message and when I do a port scan, port 80 is not listed as open.
>> 
>> Can someone tell me what I have missed or am doing wrong please?
>> 
>> 
>> I'm using CentOS release 3.4 vmlinux-2.4.21-27.0.2.EL
>> 
>> and have loaded the following rpms.
>> 
>> heartbeat-1.2.3.cvs.20050404-1.rh.el.um.1.i386.rpm \
>> heartbeat-ldirectord-1.2.3.cvs.20050404-1.rh.el.um.1.i386.rpm \
>> heartbeat-pils-1.2.3.cvs.20050404-1.rh.el.um.1.i386.rpm \
>> heartbeat-stonith-1.2.3.cvs.20050404-1.rh.el.um.1.i386.rpm \
>> ipvsadm-1.21-1.rh.el.1.um.1.i386.rpm \
>> libnet-1.1.2.1-1.rh.el.um.1.i386.rpm \
>> perl-Authen-SASL-2.08-1.rh.el.um.1.noarch.rpm \
>> perl-Convert-ASN1-0.18-1.rh.el.um.1.noarch.rpm \
>> perl-IO-Socket-SSL-0.96-1.rh.el.um.1.noarch.rpm \
>> perl-Mail-IMAPClient-2.2.9-1.rh.el.um.1.noarch.rpm \
>> perl-Net-SSLeay-1.25-1.rh.el.um.1.i386.rpm \
>> perl-Parse-RecDescent-1.94-1.rh.el.um.1.noarch.rpm \
>> perl-XML-NamespaceSupport-1.08-1.rh.el.um.1.noarch.rpm \
>> perl-XML-SAX-0.12-1.rh.el.um.1.noarch.rpm \
>> perl-ldap-0.3202-1.rh.el.um.1.noarch.rpm
>> 
>> Thanks.
>> 
>> -David.
>> 
>> 
>> hey,
> 
> 
> Is the apache on  your  LVS & Real server  running.If not start the apache on
> both the  servers.
> 
> This how you can access the Application running on Real Server from any
> client.
> 
> Application running on Real Server  named/testing  path for testing
> /var/www/html/testing
> 
> in your httpd.conf (on Real Server)
> 
> Listen should be set either to 192.168.7.4:80 <http://192.168.7.4:80>  or
> 0.0.0.0:80 <http://0.0.0.0:80>  or 192.168.1.112:80 <http://192.168.1.112:80>
> (Please test this out ,I am using 0.0.0.0:80 <http://0.0.0.0:80>  in my
> httpd.conf)
> 
> On the client you can put this url to access the applicaiton
> 
> http://192.168.1.112/testing
> 
> Regards
> 
> Ankush Grover
>