SIP message tforward to Asterisk or SER server

 
[Robert Holmquist on behalf of Ka Lun Chan]
 
Hi Bob, 
 
      I subscribed to Ultra Monkey, but for whatever reason I can't get
it to confirm to post on the user list. Can you please help me post the
following information? Thank You 
 
 
would greatly appreciate if anyone can share their experience with Ultra
Monkey SIP configuration and deployment. Thank You 
 
    I tried both Ultra Monkey Version 1.2.3 and 1.2.4, but unable to get
SIP message to forward it to the Asterisk or SER server. Asterisk SIP
debug indicated 404 not found when LDIRECTORD trying to verify the SIP
services availability and lpvsadm show weight 0. Asteirsk SIP reply back
200 okay when I add username and password into LDIRECTORD.CF and lpvsadm
show weight 1. My sniffing show SIP packet coming in to the UltraMonkey
server, but is not forwarding to the Asterisk or SER servers. Anyone
have any experience with Ultra Monkey and Asterisk who can share their
thought? 
 
    I also tried many different setting on checktype and no success. I
also noticed that the sample ldirectord.cf file has two :: in between
the real server IP address and port. I tried with just one : still
unsuccessful. 
 
Here is my LDIRECTORD.CF. 
# Global Directives
checktimeout=10
checkinterval=2
#fallback=127.0.0.1:5060
autoreload=no
logfile="/var/log/ldirectord.log"
#logfile="/var/log/messages"
quiescent=yes
 
# A sample virtual services that uses a SIP check on UDP.
# Note that using checktype=connect and protocol=udp
# will also effect ping checks
virtual=10.190.0.254:5060
       real=10.190.0.100:5060 gate
       scheduler=rr
       login="testing"
       password="1234"
       checktype=negotiate
       service=sip
       checktimeout=1
       protocol=udp
 
 
 
 
Sincerely, 
 
Ka Lun Chan (KC)
TalkFree (www.talkfree.com)
Desk: 1-415-880-5507