Re: Antw: Re: Postgresql RA fails starting master node

Takehiro, Ulrich, thanks for your responses.
I have some interesting information.

If I only run pz02, then it keeps on starting as Postgres Slave, it is not
promoted to Master:

Online: [ pz02 ]
OFFLINE: [ pz01 ]

Full list of resources:

 Master/Slave Set: msPostgresql [pgsql]
     Slaves: [ pz02 ]
     Stopped: [ pgsql:1 ]
 Resource Group: master-group
     vip-master (ocf::heartbeat:IPaddr2):       Stopped
     vip-rep    (ocf::heartbeat:IPaddr2):       Stopped

Node Attributes:
* Node pz02:
    + master-pgsql:0                    : -INFINITY
    + pgsql-data-status                 : DISCONNECT
    + pgsql-status                      : HS:alone


Logs:

Sep 11 11:36:00 pz02 pengine: [42962]: notice: unpack_config: On loss of
CCM Quorum: Ignore
Sep 11 11:36:00 pz02 pengine: [42962]: notice: LogActions: Start   pgsql:0
(pz02)
Sep 11 11:36:00 pz02 crmd: [42963]: notice: do_state_transition: State
transition S_POLICY_ENGINE -> S_TRANSITION_ENGINE [ input=I_PE_SUCCESS
cause=C_IPC_MESSAGE origin=handle_response ]
Sep 11 11:36:00 pz02 crmd: [42963]: info: do_te_invoke: Processing graph 0
(ref=pe_calc-dc-1410446160-7) derived from
/var/lib/pengine/pe-input-3875.bz2
Sep 11 11:36:00 pz02 crmd: [42963]: info: te_rsc_command: Initiating action
4: monitor pgsql:0_monitor_0 on pz02 (local)
Sep 11 11:36:00 pz02 lrmd: [42960]: info: rsc:pgsql:0 probe[2] (pid 42970)
Sep 11 11:36:00 pz02 pengine: [42962]: notice: process_pe_message:
Transition 0: PEngine Input stored in: /var/lib/pengine/pe-input-3875.bz2
Sep 11 11:36:00 pz02 crmd: [42963]: info: te_rsc_command: Initiating action
5: monitor vip-master_monitor_0 on pz02 (local)
Sep 11 11:36:00 pz02 lrmd: [42960]: info: rsc:vip-master probe[3] (pid
42972)
Sep 11 11:36:00 pz02 crmd: [42963]: info: te_rsc_command: Initiating action
6: monitor vip-rep_monitor_0 on pz02 (local)
Sep 11 11:36:00 pz02 lrmd: [42960]: info: rsc:vip-rep probe[4] (pid 42973)
Sep 11 11:36:00 pz02 lrmd: [42960]: info: operation monitor[3] on
vip-master for client 42963: pid 42972 exited with return code 7
Sep 11 11:36:00 pz02 lrmd: [42960]: info: operation monitor[4] on vip-rep
for client 42963: pid 42973 exited with return code 7
Sep 11 11:36:00 pz02 crmd: [42963]: info: process_lrm_event: LRM operation
vip-master_monitor_0 (call=3, rc=7, cib-update=26, confirmed=true) not
running
Sep 11 11:36:00 pz02 crmd: [42963]: info: process_lrm_event: LRM operation
vip-rep_monitor_0 (call=4, rc=7, cib-update=27, confirmed=true) not running
Sep 11 11:36:00 pz02 lrmd: [42960]: info: operation monitor[2] on pgsql:0
for client 42963: pid 42970 exited with return code 7
Sep 11 11:36:00 pz02 crmd: [42963]: info: process_lrm_event: LRM operation
pgsql:0_monitor_0 (call=2, rc=7, cib-update=28, confirmed=true) not running
Sep 11 11:36:00 pz02 crmd: [42963]: info: te_rsc_command: Initiating action
3: probe_complete probe_complete on pz02 (local) - no waiting
Sep 11 11:36:00 pz02 crmd: [42963]: info: te_rsc_command: Initiating action
7: start pgsql:0_start_0 on pz02 (local)
Sep 11 11:36:00 pz02 attrd: [42961]: notice: attrd_trigger_update: Sending
flush op to all hosts for: probe_complete (true)
Sep 11 11:36:00 pz02 attrd: [42961]: notice: attrd_perform_update: Sent
update 4: probe_complete=true
Sep 11 11:36:00 pz02 lrmd: [42960]: info: rsc:pgsql:0 start[5] (pid 43082)
Sep 11 11:36:00 pz02 crm_attribute: [43131]: info: Invoked:
/usr/sbin/crm_attribute -l reboot -N pz02 -n pgsql-status -v STOP
Sep 11 11:36:00 pz02 attrd: [42961]: notice: attrd_trigger_update: Sending
flush op to all hosts for: pgsql-status (STOP)
Sep 11 11:36:00 pz02 attrd: [42961]: notice: attrd_perform_update: Sent
update 7: pgsql-status=STOP
Sep 11 11:36:00 pz02 crmd: [42963]: info: abort_transition_graph:
te_update_diff:176 - Triggered transition abort (complete=0, tag=nvpair,
id=status-pz02-pgsql-status, name=pgsql-status, value=STOP, magic=NA,
cib=0.287.18) : Transient attribute: update
Sep 11 11:36:00 pz02 crm_attribute: [43132]: info: Invoked:
/usr/sbin/crm_attribute -l reboot -N pz02 -n pgsql-master-baseline -D
Sep 11 11:36:00 pz02 crm_attribute: [43136]: info: Invoked: crm_attribute
-N pz02 -n master-pgsql:0 -l reboot -v -INFINITY
Sep 11 11:36:00 pz02 attrd: [42961]: notice: attrd_trigger_update: Sending
flush op to all hosts for: master-pgsql:0 (-INFINITY)
Sep 11 11:36:00 pz02 attrd: [42961]: notice: attrd_perform_update: Sent
update 10: master-pgsql:0=-INFINITY
Sep 11 11:36:00 pz02 crmd: [42963]: info: abort_transition_graph:
te_update_diff:176 - Triggered transition abort (complete=0, tag=nvpair,
id=status-pz02-master-pgsql.0, name=master-pgsql:0, value=-INFINITY,
magic=NA, cib=0.287.19) : Transient attribute: update
Sep 11 11:36:00 pz02 crm_attribute: [43146]: info: Invoked:
/usr/sbin/crm_attribute -l reboot -N pz02 -n pgsql-xlog-loc -D
Sep 11 11:36:00 pz02 lrmd: [42960]: info: RA output: (pgsql:0:start:stderr)
psql: could not connect to server: No such file or directory
Is the server running locally and accepting
connections on Unix domain socket "/var/run/postgresql/.s.PGSQL.5432"?


Sep 11 11:36:02 pz02 crm_attribute: [43259]: info: Invoked:
/usr/sbin/crm_attribute -l reboot -N pz02 -n pgsql-status -v HS:alone
Sep 11 11:36:02 pz02 attrd: [42961]: notice: attrd_trigger_update: Sending
flush op to all hosts for: pgsql-status (HS:alone)
Sep 11 11:36:02 pz02 lrmd: [42960]: info: operation start[5] on pgsql:0 for
client 42963: pid 43082 exited with return code 0
Sep 11 11:36:02 pz02 attrd: [42961]: notice: attrd_perform_update: Sent
update 12: pgsql-status=HS:alone
Sep 11 11:36:02 pz02 crmd: [42963]: info: process_lrm_event: LRM operation
pgsql:0_start_0 (call=5, rc=0, cib-update=29, confirmed=true) ok
Sep 11 11:36:02 pz02 crmd: [42963]: info: abort_transition_graph:
te_update_diff:176 - Triggered transition abort (complete=0, tag=nvpair,
id=status-pz02-pgsql-status, name=pgsql-status, value=HS:alone, magic=NA,
cib=0.287.20) : Transient attribute: update
Sep 11 11:36:02 pz02 crmd: [42963]: info: te_rsc_command: Initiating action
46: notify pgsql:0_post_notify_start_0 on pz02 (local)
Sep 11 11:36:02 pz02 lrmd: [42960]: info: rsc:pgsql:0 notify[6] (pid 43260)
Sep 11 11:36:02 pz02 lrmd: [42960]: info: operation notify[6] on pgsql:0
for client 42963: pid 43260 exited with return code 0
Sep 11 11:36:02 pz02 crmd: [42963]: info: process_lrm_event: LRM operation
pgsql:0_notify_0 (call=6, rc=0, cib-update=0, confirmed=true) ok
Sep 11 11:36:02 pz02 crmd: [42963]: notice: run_graph: ==== Transition 0
(Complete=13, Pending=0, Fired=0, Skipped=1, Incomplete=0,
Source=/var/lib/pengine/pe-input-3875.bz2): Stopped
But it is correctly DC: [42963]: info: update_dc: Set DC to pz02 (3.0.6)





*I’ve found that using "rep_mode=sync” with my actual configuration then I
get “unknown error” when pgsl try to start Postgres:*



Sep 11 11:50:12 pz01 pengine: [54416]: notice: LogActions: Start   pgsql:0
(pz01)
Sep 11 11:50:12 pz01 crmd: [54417]: notice: do_state_transition: State
transition S_POLICY_ENGINE -> S_TRANSITION_ENGINE [ input=I_PE_SUCCESS
cause=C_IPC_MESSAGE origin=handle_response ]
Sep 11 11:50:12 pz01 crmd: [54417]: info: do_te_invoke: Processing graph 0
(ref=pe_calc-dc-1410450612-7) derived from
/var/lib/pengine/pe-input-1198.bz2
Sep 11 11:50:12 pz01 crmd: [54417]: info: te_rsc_command: Initiating action
4: monitor pgsql:0_monitor_0 on pz01 (local)
Sep 11 11:50:12 pz01 lrmd: [54414]: info: rsc:pgsql:0 probe[2] (pid 54424)
Sep 11 11:50:12 pz01 crmd: [54417]: info: te_rsc_command: Initiating action
5: monitor vip-master_monitor_0 on pz01 (local)
Sep 11 11:50:12 pz01 lrmd: [54414]: info: rsc:vip-master probe[3] (pid
54425)
Sep 11 11:50:12 pz01 crmd: [54417]: info: te_rsc_command: Initiating action
6: monitor vip-rep_monitor_0 on pz01 (local)
Sep 11 11:50:12 pz01 lrmd: [54414]: info: rsc:vip-rep probe[4] (pid 54427)
Sep 11 11:50:12 pz01 pengine: [54416]: notice: process_pe_message:
Transition 0: PEngine Input stored in: /var/lib/pengine/pe-input-1198.bz2
Sep 11 11:50:12 pz01 lrmd: [54414]: info: operation monitor[3] on
vip-master for client 54417: pid 54425 exited with return code 7
Sep 11 11:50:12 pz01 crmd: [54417]: info: process_lrm_event: LRM operation
vip-master_monitor_0 (call=3, rc=7, cib-update=26, confirmed=true) not
running
Sep 11 11:50:12 pz01 lrmd: [54414]: info: operation monitor[4] on vip-rep
for client 54417: pid 54427 exited with return code 7
Sep 11 11:50:12 pz01 crmd: [54417]: info: process_lrm_event: LRM operation
vip-rep_monitor_0 (call=4, rc=7, cib-update=27, confirmed=true) not running
Sep 11 11:50:12 pz01 lrmd: [54414]: info: operation monitor[2] on pgsql:0
for client 54417: pid 54424 exited with return code 7
Sep 11 11:50:12 pz01 crmd: [54417]: info: process_lrm_event: LRM operation
pgsql:0_monitor_0 (call=2, rc=7, cib-update=28, confirmed=true) not running
Sep 11 11:50:12 pz01 crmd: [54417]: info: te_rsc_command: Initiating action
3: probe_complete probe_complete on pz01 (local) - no waiting
Sep 11 11:50:12 pz01 crmd: [54417]: info: te_rsc_command: Initiating action
7: start pgsql:0_start_0 on pz01 (local)
Sep 11 11:50:12 pz01 attrd: [54415]: notice: attrd_trigger_update: Sending
flush op to all hosts for: probe_complete (true)
Sep 11 11:50:12 pz01 lrmd: [54414]: info: rsc:pgsql:0 start[5] (pid 54537)
Sep 11 11:50:12 pz01 attrd: [54415]: notice: attrd_perform_update: Sent
update 4: probe_complete=true
Sep 11 11:50:12 pz01 crm_attribute: [54586]: info: Invoked:
/usr/sbin/crm_attribute -l reboot -N pz01 -n pgsql-status -v STOP
Sep 11 11:50:12 pz01 attrd: [54415]: notice: attrd_trigger_update: Sending
flush op to all hosts for: pgsql-status (STOP)
Sep 11 11:50:12 pz01 attrd: [54415]: notice: attrd_perform_update: Sent
update 7: pgsql-status=STOP
Sep 11 11:50:12 pz01 crmd: [54417]: info: abort_transition_graph:
te_update_diff:176 - Triggered transition abort (complete=0, tag=nvpair,
id=status-pz01-pgsql-status, name=pgsql-status, value=STOP, magic=NA,
cib=0.330.18) : Transient attribute: update
Sep 11 11:50:12 pz01 crm_attribute: [54587]: info: Invoked:
/usr/sbin/crm_attribute -l reboot -N pz01 -n pgsql-master-baseline -D
Sep 11 11:50:12 pz01 crm_attribute: [54591]: info: Invoked: crm_attribute
-N pz01 -n master-pgsql:0 -l reboot -v -INFINITY
Sep 11 11:50:12 pz01 attrd: [54415]: notice: attrd_trigger_update: Sending
flush op to all hosts for: master-pgsql:0 (-INFINITY)
Sep 11 11:50:12 pz01 attrd: [54415]: notice: attrd_perform_update: Sent
update 10: master-pgsql:0=-INFINITY
Sep 11 11:50:12 pz01 crmd: [54417]: info: abort_transition_graph:
te_update_diff:176 - Triggered transition abort (complete=0, tag=nvpair,
id=status-pz01-master-pgsql.0, name=master-pgsql:0, value=-INFINITY,
magic=NA, cib=0.330.19) : Transient attribute: update
Sep 11 11:50:12 pz01 crm_attribute: [54601]: info: Invoked:
/usr/sbin/crm_attribute -l reboot -N pz01 -n pgsql-xlog-loc -D
*Sep 11 11:50:12 pz01 lrmd: [54414]: info: operation start[5] on pgsql:0
for client 54417: pid 54537 exited with return code 1*
*Sep 11 11:50:12 pz01 crmd: [54417]: info: process_lrm_event: LRM operation
pgsql:0_start_0 (call=5, rc=1, cib-update=29, confirmed=true) unknown error*
Sep 11 11:50:12 pz01 crmd: [54417]: WARN: status_from_rc: Action 7
(pgsql:0_start_0) on pz01 failed (target: 0 vs. rc: 1): Error
Sep 11 11:50:12 pz01 crmd: [54417]: WARN: update_failcount: Updating
failcount for pgsql:0 on pz01 after failed start: rc=1 (update=INFINITY,
time=1410450612)
Sep 11 11:50:12 pz01 crmd: [54417]: info: abort_transition_graph:
match_graph_event:277 - Triggered transition abort (complete=0,
tag=lrm_rsc_op, id=pgsql:0_last_failure_0,
magic=0:1;7:0:0:af61405d-b520-4e01-8f85-0443bd508a04, cib=0.330.20) : Event
failed
Sep 11 11:50:12 pz01 crmd: [54417]: info: te_rsc_command: Initiating action
46: notify pgsql:0_post_notify_start_0 on pz01 (local)
Sep 11 11:50:12 pz01 attrd: [54415]: notice: attrd_trigger_update: Sending
flush op to all hosts for: fail-count-pgsql:0 (INFINITY)
Sep 11 11:50:12 pz01 lrmd: [54414]: info: rsc:pgsql:0 notify[6] (pid 54616)
Sep 11 11:50:12 pz01 attrd: [54415]: notice: attrd_perform_update: Sent
update 13: fail-count-pgsql:0=INFINITY
Sep 11 11:50:12 pz01 crmd: [54417]: info: abort_transition_graph:
te_update_diff:176 - Triggered transition abort (complete=0, tag=nvpair,
id=status-pz01-fail-count-pgsql.0, name=fail-count-pgsql:0, value=INFINITY,
magic=NA, cib=0.330.21) : Transient attribute: update
Sep 11 11:50:12 pz01 attrd: [54415]: notice: attrd_trigger_update: Sending
flush op to all hosts for: last-failure-pgsql:0 (1410450612)
Sep 11 11:50:12 pz01 attrd: [54415]: notice: attrd_perform_update: Sent
update 16: last-failure-pgsql:0=1410450612
Sep 11 11:50:12 pz01 crmd: [54417]: info: abort_transition_graph:
te_update_diff:176 - Triggered transition abort (complete=0, tag=nvpair,
id=status-pz01-last-failure-pgsql.0, name=last-failure-pgsql:0,
value=1410450612, magic=NA, cib=0.330.22) : Transient attribute: update
Sep 11 11:50:12 pz01 lrmd: [54414]: info: operation notify[6] on pgsql:0
for client 54417: pid 54616 exited with return code 0
Sep 11 11:50:12 pz01 crmd: [54417]: info: process_lrm_event: LRM operation
pgsql:0_notify_0 (call=6, rc=0, cib-update=0, confirmed=true) ok
Sep 11 11:50:12 pz01 crmd: [54417]: notice: run_graph: ==== Transition 0
(Complete=13, Pending=0, Fired=0, Skipped=1, Incomplete=0,
Source=/var/lib/pengine/pe-input-1198.bz2): Stopped
Sep 11 11:50:12 pz01 crmd: [54417]: notice: do_state_transition: State
transition S_TRANSITION_ENGINE -> S_POLICY_ENGINE [ input=I_PE_CALC
cause=C_FSA_INTERNAL origin=notify_crmd ]
Sep 11 11:50:12 pz01 pengine: [54416]: notice: unpack_config: On loss of
CCM Quorum: Ignore
Sep 11 11:50:12 pz01 pengine: [54416]: WARN: unpack_rsc_op: Processing
failed op pgsql:0_last_failure_0 on pz01: unknown error (1)
Sep 11 11:50:12 pz01 pengine: [54416]: WARN: common_apply_stickiness:
Forcing msPostgresql away from pz01 after 1000000 failures (max=1)
Sep 11 11:50:12 pz01 pengine: [54416]: WARN: common_apply_stickiness:
Forcing msPostgresql away from pz01 after 1000000 failures (max=1)
Sep 11 11:50:12 pz01 pengine: [54416]: notice: LogActions: Stop    pgsql:0
(pz01)




*But If I change to “rep_mode=async” then I get  'invalid parameter’ from *
*pgsql:0_monitor_0*

Sep 11 11:54:27 pz01 pengine: [54884]: notice: LogActions: Start   pgsql:0
(pz01)
Sep 11 11:54:27 pz01 crmd: [54885]: notice: do_state_transition: State
transition S_POLICY_ENGINE -> S_TRANSITION_ENGINE [ input=I_PE_SUCCESS
cause=C_IPC_MESSAGE origin=handle_response ]
Sep 11 11:54:27 pz01 crmd: [54885]: info: do_te_invoke: Processing graph 0
(ref=pe_calc-dc-1410450867-7) derived from
/var/lib/pengine/pe-input-1202.bz2
Sep 11 11:54:27 pz01 crmd: [54885]: info: te_rsc_command: Initiating action
4: monitor pgsql:0_monitor_0 on pz01 (local)
Sep 11 11:54:27 pz01 lrmd: [54882]: info: rsc:pgsql:0 probe[2] (pid 54892)
Sep 11 11:54:27 pz01 pengine: [54884]: notice: process_pe_message:
Transition 0: PEngine Input stored in: /var/lib/pengine/pe-input-1202.bz2
Sep 11 11:54:27 pz01 crmd: [54885]: info: te_rsc_command: Initiating action
5: monitor vip-master_monitor_0 on pz01 (local)
Sep 11 11:54:27 pz01 lrmd: [54882]: info: rsc:vip-master probe[3] (pid
54894)
Sep 11 11:54:27 pz01 crmd: [54885]: info: te_rsc_command: Initiating action
6: monitor vip-rep_monitor_0 on pz01 (local)
Sep 11 11:54:27 pz01 lrmd: [54882]: info: rsc:vip-rep probe[4] (pid 54895)
Sep 11 11:54:27 pz01 lrmd: [54882]: info: operation monitor[3] on
vip-master for client 54885: pid 54894 exited with return code 7
Sep 11 11:54:27 pz01 crmd: [54885]: info: process_lrm_event: LRM operation
vip-master_monitor_0 (call=3, rc=7, cib-update=26, confirmed=true) not
running
Sep 11 11:54:27 pz01 lrmd: [54882]: info: operation monitor[4] on vip-rep
for client 54885: pid 54895 exited with return code 7
Sep 11 11:54:27 pz01 crmd: [54885]: info: process_lrm_event: LRM operation
vip-rep_monitor_0 (call=4, rc=7, cib-update=27, confirmed=true) not running
*Sep 11 11:54:27 pz01 lrmd: [54882]: info: RA output:
(pgsql:0:probe:stderr) /usr/lib/ocf/resource.d//heartbeat/pgsql: 1646:
/usr/lib/ocf/resource.d//heartbeat/pgsql: Bad substitution*

*Sep 11 11:54:27 pz01 lrmd: [54882]: info: operation monitor[2] on pgsql:0
for client 54885: pid 54892 exited with return code 2*
*Sep 11 11:54:27 pz01 crmd: [54885]: info: process_lrm_event: LRM operation
pgsql:0_monitor_0 (call=2, rc=2, cib-update=28, confirmed=true) invalid
parameter*
*Sep 11 11:54:27 pz01 crmd: [54885]: WARN: status_from_rc: Action 4
(pgsql:0_monitor_0) on pz01 failed (target: 7 vs. rc: 2): Error*
Sep 11 11:54:27 pz01 crmd: [54885]: info: abort_transition_graph:
match_graph_event:277 - Triggered transition abort (complete=0,
tag=lrm_rsc_op, id=pgsql:0_last_failure_0,
magic=0:2;4:0:7:58ccffc4-db11-44a2-aa1a-bc79cd4924ae, cib=0.331.16) : Event
failed
Sep 11 11:54:27 pz01 crmd: [54885]: info: te_rsc_command: Initiating action
3: probe_complete probe_complete on pz01 (local) - no waiting
Sep 11 11:54:27 pz01 crmd: [54885]: notice: run_graph: ==== Transition 0
(Complete=7, Pending=0, Fired=0, Skipped=3, Incomplete=4,
Source=/var/lib/pengine/pe-input-1202.bz2): Stopped
Sep 11 11:54:27 pz01 crmd: [54885]: notice: do_state_transition: State
transition S_TRANSITION_ENGINE -> S_POLICY_ENGINE [ input=I_PE_CALC
cause=C_FSA_INTERNAL origin=notify_crmd ]
Sep 11 11:54:27 pz01 attrd: [54883]: notice: attrd_trigger_update: Sending
flush op to all hosts for: probe_complete (true)
Sep 11 11:54:27 pz01 pengine: [54884]: notice: unpack_config: On loss of
CCM Quorum: Ignore
Sep 11 11:54:27 pz01 pengine: [54884]: ERROR: unpack_rsc_op: Preventing
msPostgresql from re-starting on pz01: operation monitor failed 'invalid
parameter' (rc=2)
Sep 11 11:54:27 pz01 crmd: [54885]: notice: do_state_transition: State
transition S_POLICY_ENGINE -> S_TRANSITION_ENGINE [ input=I_PE_SUCCESS
cause=C_IPC_MESSAGE origin=handle_response ]
Sep 11 11:54:27 pz01 crmd: [54885]: info: do_te_invoke: Processing graph 1
(ref=pe_calc-dc-1410450867-12) derived from
/var/lib/pengine/pe-input-1203.bz2
Sep 11 11:54:27 pz01 crmd: [54885]: info: te_rsc_command: Initiating action
3: probe_complete probe_complete on pz01 (local) - no waiting
Sep 11 11:54:27 pz01 crmd: [54885]: notice: run_graph: ==== Transition 1
(Complete=1, Pending=0, Fired=0, Skipped=0, Incomplete=0,
Source=/var/lib/pengine/pe-input-1203.bz2): Complete
Sep 11 11:54:27 pz01 crmd: [54885]: notice: do_state_transition: State
transition S_TRANSITION_ENGINE -> S_IDLE [ input=I_TE_SUCCESS
cause=C_FSA_INTERNAL origin=notify_crmd ]
Sep 11 11:54:27 pz01 attrd: [54883]: notice: attrd_perform_update: Sent
update 4: probe_complete=true
Sep 11 11:54:27 pz01 pengine: [54884]: notice: process_pe_message:
Transition 1: PEngine Input stored in: /var/lib/pengine/pe-input-1203.bz2
Sep 11 11:54:27 pz01 attrd: [54883]: notice: attrd_trigger_update: Sending
flush op to all hosts for: probe_complete (true)
Sep 11 11:54:27 pz01 attrd: [54883]: notice: attrd_perform_update: Sent
update 6: probe_complete=true



*Some questions:*

1. Could my issue be related with some erroneous postgres configuration?
(I’ll check my postgres conf and I’ll post it)
2. How can I debug values from pgsl?
    For example to check values in pgsl:L1646
         sed -i "/${rep_mode_string//\//\\/}/d" $OCF_RESKEY_config

    If I use:  *ocf_log err "$OCF_RESKEY_config”*   in pgsql
    Where do I have to check this print? Because I’m not seeing it in
corosync.log.
    Do I have to enable anything else?

Thanks for your help!!




2014-09-11 3:06 GMT-03:00 Ulrich Windl <[email protected]>:

> >>> Takehiro Matsushima <[email protected]> schrieb am
> 11.09.2014 um
> 01:15 in Nachricht
> <CAAbhU_DtkdGfJ425J3wWrUU7eX_oXs--CMcia-uGVjCnvqHbPQ@mail.gmail.com>:
> > Hi.
> >
> > Let me ask some things,
> >
> > Can pz01 run under pacemker, without pz02?
> > Something differed from running only pz02?
> > Could you find some hints in the logs of each postgresql(and
> pgstartup.log)?
>
> Sometimes it's handy to write a script for ocf-tester (many params to
> pass) and run it in verbose and RA debugging mode (hoping the RA says
> something reasonable). But stop the RA in the cluster first. Try the script
> on both nodes looking for differences.
>
> >
> > Good-luck,
> >
> > Takehiro Matsushima
> > _______________________________________________
> > Linux-HA mailing list
> > [email protected]
> > http://lists.linux-ha.org/mailman/listinfo/linux-ha
> > See also: http://linux-ha.org/ReportingProblems
>
>
>
> _______________________________________________
> Linux-HA mailing list
> [email protected]
> http://lists.linux-ha.org/mailman/listinfo/linux-ha
> See also: http://linux-ha.org/ReportingProblems
>
_______________________________________________
Linux-HA mailing list
[email protected]
http://lists.linux-ha.org/mailman/listinfo/linux-ha
See also: http://linux-ha.org/ReportingProblems