Re: [PATCH v5 1/2] ata: pata_cswarp: Add Amiga cslab ata support
Geert Uytterhoeven <[email protected]>
| Newsgroups | gmane.linux.ide,gmane.linux.kernel |
|---|---|
| Message-ID | <CAMuHMdVBjxXNX19k55Yu4D5GD1nkb31TuBJN0uFDqD9Oe5Gtsw@mail.gmail.com> |
Hi Paolo, On Mon, 24 Aug 2026 at 17:33, Paolo Pisati <[email protected]> wrote: > Driver for the on-board IDE interface on CS-Lab Warp Expansion Card > (NOTE that idemode=native has to be set in Warp Configuration) > > Assisted-by: Claude_Code:claude-opus-5 > Signed-off-by: Paolo Pisati <[email protected]> Thanks for the update! > --- /dev/null > +++ b/drivers/ata/pata_cswarp.c > +static unsigned int pata_cswarp_data_xfer(struct ata_queued_cmd *qc, > + unsigned char *buf, > + unsigned int buflen, int rw) > +{ > + struct ata_device *dev = qc->dev; > + struct ata_port *ap = dev->link->ap; > + void __iomem *data_addr = ap->ioaddr.data_addr; > + unsigned int words = buflen >> 1; > + u16 *buf16 = (u16 *)buf; > + > + /* Transfer multiple of 2 bytes */ > + if (rw == READ) > + raw_insw(data_addr, buf16, words); > + else > + raw_outsw(data_addr, buf16, words); > + > + /* Transfer trailing byte, if any. */ > + if (unlikely(buflen & 0x01)) { > + if (rw == READ) > + buf[buflen - 1] = raw_inw(data_addr) >> 8; > + else > + raw_outw(buf[buflen - 1] << 8, data_addr); > + words++; > + } > + > + return words << 1; This may be one less than the actual number of bytes Why not buflen? > +} > +static int pata_cswarp_probe(struct zorro_dev *z, > + const struct zorro_device_id *ent) > +{ > + static const char board_name[] = "csWarp"; > + struct ata_host *host; > + struct ata_port *ap; > + void __iomem *base; > + unsigned long board = z->resource.start; > + > + dev_info(&z->dev, "%s IDE controller (board: 0x%lx)\n", board_name, > + board); > + > + if (!devm_request_mem_region(&z->dev, board + WARP_OFFSET_ATA, 0x1800, > + DRV_NAME)) > + return -ENXIO; > + > + host = ata_host_alloc(&z->dev, 1); > + if (!host) > + return -ENXIO; > + > + ap = host->ports[0]; > + base = ioremap(board + WARP_OFFSET_ATA, 0x1800); > + > + ap->ops = &pata_cswarp_ops; > + > + ap->pio_mask = ATA_PIO4; > + ap->flags |= ATA_FLAG_SLAVE_POSS | ATA_FLAG_NO_IORDY | > + ATA_FLAG_PIO_POLLING; > + > + ap->ioaddr.data_addr = base; > + ap->ioaddr.error_addr = base + 1 * 4; > + ap->ioaddr.feature_addr = base + 1 * 4; > + ap->ioaddr.nsect_addr = base + 2 * 4; > + ap->ioaddr.lbal_addr = base + 3 * 4; > + ap->ioaddr.lbam_addr = base + 4 * 4; > + ap->ioaddr.lbah_addr = base + 5 * 4; > + ap->ioaddr.device_addr = base + 6 * 4; > + ap->ioaddr.status_addr = base + 7 * 4; > + ap->ioaddr.command_addr = base + 7 * 4; > + > + ap->ioaddr.altstatus_addr = base + (0x1000 | (6UL << 2)); > + ap->ioaddr.ctl_addr = base + (0x1000 | (6UL << 2)); > + > + ata_port_desc(ap, " cmd 0x%lx ctl 0x%lx", (unsigned long)base, > + (unsigned long)ap->ioaddr.ctl_addr); Both printed addresses are virtual addresses hence not really useful. If you want to print something, please print board or z->resource instead. > +static const struct zorro_device_id pata_cswarp_zorro_tbl[] = { > + { ZORRO_PROD_CSLAB_WARP_1260, 0}, > + { 0 } Please use named initializers, and drop unneeded zeroes, like Uwe just did in all existing Zorro drivers: { .id = ZORRO_PROD_CSLAB_WARP_1260 }, { } > +}; Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected] In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds