(usagi-users 03870) Re: Binding Update Messages not routed

Hi,

Could you send us the packet capture (preferrably taken
by another node attached to the same link as the MN) that
includes both the BU message and the ICMP error message?
And could you also send the configuration file of your
mobile node?

The BU packet comes with a home address destination option,
but it should affect the source IP address not the
destination IP address.  The error you got (destination
unreach) is telling that the router could not find the
route to the destination, so it seems that the cause of
the error is something other than MIPv6 operation.

Regards,
Shinta

On Tue, 3 Jul 2007 05:02:01 -0700
"Kohn, Rodolfo" <[email protected]> wrote:

> Hi all,
> 
> I'm having a problem with my MIPv6 testbed.
> 
>  
> 
> The router, instead of forwarding the Binding Update messages from one
> network to other, is dropping the BUs sent from the MN to the HA. Then,
> it returns "Unreachable destination" to the MN.
> 
>  
> 
> I think it is a problem with netfilter but I cannot figure out the root
> cause.
> 
>  
> 
> When I stop using MIPv6 (I stopped mip6d) and I run a ping6 from one
> node to the other, it correctly works.
> 
>  
> 
> My testbed consists of 2 networks connected with a router with the MN in
> one network and the HA in the other network.
> 
>  
> 
> If somebody could help me I'd appreciate it.
> 
>  
> 
>  
> 
> Thanks in advance,
> 
> Rodolfo
> 
>  
>