[PATCH 10/11] isdn/gigaset: document dial-out number format
Tilman Schmidt <[email protected]>
| Newsgroups | gmane.linux.network,gmane.linux.isdn.i4l.devel,gmane.linux.kernel |
|---|---|
| Message-ID | <[email protected]> |
Add a paragraph to the driver documentation describing how to make internal and external calls. Impact: documentation Signed-off-by: Tilman Schmidt <[email protected]> --- Documentation/isdn/README.gigaset | 17 ++++++++++++++++- 1 files changed, 16 insertions(+), 1 deletions(-) diff --git a/Documentation/isdn/README.gigaset b/Documentation/isdn/README.gigaset index e472df8..702c046 100644 --- a/Documentation/isdn/README.gigaset +++ b/Documentation/isdn/README.gigaset @@ -263,7 +263,22 @@ GigaSet 307x Device Driver change its CID mode while the driver is loaded, eg. echo 0 > /sys/class/tty/ttyGU0/cidmode -2.7. Unregistered Wireless Devices (M101/M105) +2.7. Dialing Numbers + --------------- + The called party number provided by an application for dialing out must + be a public network number according to the local dialing plan, without + any dial prefix for getting an outside line. + + Internal calls can be made by providing an internal extension number + prefixed with "**" (two asterisks) as the called party number. So to dial + eg. the first registered DECT handset, give "**11" as the called party + number. Dialing "***" (three asterisks) calls all extensions + simultaneously (global call). + + This holds for both CAPI 2.0 and ISDN4Linux applications. Unimodem mode + does not support internal calls. + +2.8. Unregistered Wireless Devices (M101/M105) ----------------------------------------- The main purpose of the ser_gigaset and usb_gigaset drivers is to allow the M101 and M105 wireless devices to be used as ISDN devices for ISDN -- 1.6.5.3.298.g39add -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html