Answering-machine / Fax with mISDN

Hi,

My ISDN-Card (HFC-4S, hfcmulti) seems to be working OK  - kernel modules loads OK and misdn_info produces the following:

Found 2 ports
  Port  0 'hfc-4s.1-1':      TE/NT-mode BRI S/T (for phone lines & phones)
                              2 B-channels: 1-2
                                B-protocols: RAW HDLC X75slp L2:DSP L2:DSPHDLC
  --------
  Port  1 'hfc-4s.1-2':      TE/NT-mode BRI S/T (for phone lines & phones)
                              2 B-channels: 1-2
                                B-protocols: RAW HDLC X75slp L2:DSP L2:DSPHDLC

And misdn_log notices that there is a call coming in:

mISDN kernel version 1.01.21 found
mISDN user   version 1.01.24 found
2 controllers found
        id:             0
        Dprotocols:     00000006
        Bprotocols:     0000006e
        protocol:       0
        channelmap:     00000000000000000000000000000006
        nrbchan:        2
        name:           hfc-4s.1-1
log bind ch(0) return 0
Echo channel logging no
24.06.2012 12:34:28.943707 ACTIVATE IND id=0000ffff
24.06.2012 12:34:29.370115 DATA IND id=00007f00  54 bytes 02 ff 03 08  01 01 05 a1  04 03 80 90  a3 18 01 89
                                                          6c 0c 01 83  30 37 39 36  36 33 31 33  34 38 6c 0c
                                                          01 83 30 37  39 36 36 33  31 33 34 38  70 08 81 36
                                                          34 35 32 31  34 36
24.06.2012 12:34:29.386126 DATA IND id=00007f3f   8 bytes fe ff 03 0f  b0 2e 02 eb
24.06.2012 12:34:29.402128 DATA IND id=00004d00   3 bytes 00 9b 73
24.06.2012 12:34:29.402134 DATA IND id=00007500   3 bytes 00 eb 73
24.06.2012 12:34:29.418123 DATA IND id=00004d00   4 bytes 00 9b 01 02
24.06.2012 12:34:38.490316 DATA IND id=00004d00   4 bytes 02 9b 01 03
24.06.2012 12:34:38.506322 DATA IND id=00007500   4 bytes 02 eb 01 01
24.06.2012 12:34:40.458359 DATA IND id=00004d00  12 bytes 02 9b 00 02  08 01 01 4d  08 02 80 90
24.06.2012 12:34:40.474367 DATA IND id=00004d00   4 bytes 00 9b 01 04
24.06.2012 12:34:44.570453 DATA IND id=00007500   3 bytes 00 eb 73
24.06.2012 12:34:46.474497 DATA IND id=00004d00   3 bytes 00 9b 73
24.06.2012 12:34:57.035709 DEACTIVATE IND id=0000ffff

So as far as I can see my HW-setup Works.
And now for my question.

Which tools should/can be used to build an Answering-machine and fax sender/receiver with this ISDN-HW?
Any suggestions?

I have tried som capi tools but they all complain that capi20 is missing (the only device that I get in /dev is capi (crw------- 1 root root 68, 0 Jun 24 12:27 capi) when I load the capi drivers.

Regards,
-- 
Dan Johansson, <http://www.dmj.nu>
***************************************************
This message is printed on 100% recycled electrons!
***************************************************