Re: mISDN2 supported hardware

On Sun, Dec 02, 2012 at 07:59:40PM +0200, Jānis Rukšāns wrote:
> On Sun, Dec 2, 2012 at 5:13 PM, Patrick Lists
> <[email protected]> wrote:
> >> 2. hardware information is discoverable from userspace (Zaptel/DAHDi
> >> drivers required hardware settings known and configured before the
> >> modules have been loaded).
> >
> >
> > Maybe I misunderstood but I always had to configure both DAHDI (zaptel is
> > EOL), Sangoma and mISDN so don't see the advantage.
> >
> >
> >> 3. easy, mostly hardware-independent, configuration (vendor-specific
> >> drivers and many DADHDi drivers need special coding for specific device)
> 
> I think Jacek is referring to the fact that for many (if not all)
> DAHDI/Zaptel drivers require the configuration to be passed to the
> driver when the kernel module is loaded. For one particular PRI card,
> I even had to recompile the kernel module each time I wanted to change
> it's options. Compared to that, configuring LCR is a walk in a park.

That is exactly what I meant.

> As for the original question, the list of supported hardware can be
> found here: https://www.misdn.eu/wiki/MISDN_v2_Hardware/

I am afraid this list is a bit outdated and those devices may be hard to
find these days.

> If you have an HFC card that is not recognized, see if you can get it
> working and submit a patch (=

yeah… I have tried that with OpenVox, but it is hard to do this right
without any specification or, at least, readable/well-commented code
from the hardware vendor…

Greets,
        Jacek
_______________________________________________
isdn4linux mailing list
[email protected]
https://www.isdn4linux.de/mailman/listinfo/isdn4linux