Re: "MPH_DEACTIVATE_IND" message.... (now with single port HFC board)

Hi Karsten!

I am really confused, and I am not getting this thing to run.

I took now a 10.- € ISDN HFC board, which I assembled into the machine,
and took the 4 port isdn card out of the server.

I am still having the same result. Any ideas what it could be ?!
I am really not getting smart, and starting to get totally confused.


The cable has a length of about 50m from the NT-Unit, and is connected
to the server in the datacenter, and I have a DID number block...




root@babe3306:/storage# misdn_info

Found 1 port
  Port  0 'hfc-pci.1':       TE/NT-mode BRI S/T (for phone lines & phones)
                              2 B-channels: 1-2
                                B-protocols: RAW HDLC X75slp L2:DSP
L2:DSPHDL



and misdntestcon outputs me:

doug@home:/tmp# misdntestcon -c0 -n12
TestmISDN 1.0
got DL_INFORMATION_IND
got unexpected MPH_DEACTIVATE_IND (602) message
got unexpected DL_RELEASE_IND (1108) message


for any ideas.... I really would thank you



Doug



Am 04.03.2014 20:59, schrieb Karsten Keil:
> Hi Doug,
> 
> Am 04.03.2014 18:17, schrieb Doug Warren:
>> Hallo Mr. Keil,
>> I am writing you, because I beg for your help telling me what this error
>> message means which mISDN gives me in the shell out.
>>
>> I previously sent a Mail 2 the misdn user and developer list, and nobody
>> responded so far.
>>
>> I want to make use of my 4 port hfc board with mISDN2 and I simply don't
>> have any clue what those error messages are on the shell.
>>
>> I have used the tool: "misdntestcon" from the mISDNuser package to test
>> my 4 port hfc board.
>>
>> I always got the same (error ?!) messge with "MPH_DEACTIVATE_IND" and
>> "DL_RELEASE_IND".
>>
>> Could you explain me what it means in detail?!
>>
> 
> 1. This maybe is normal, depends on your line setup and if a working
> line is connected.
> If you have a ISDN line connected then you should see some more messages.
> 
> Normal activation looks like this:
> 
> pingi3:/home/kkeil/mISDNuser/example # ./misdntestcon -c0 -n 12
> TestmISDN 1.0
> got DL_INFORMATION_IND
> got MPH_ACTIVATE_IND
> got MPH_ACTIVATE_IND
> got MPH_ACTIVATE_IND
> got DL_INFORMATION_IND
> got DL_ESTABLISH_CNF