c2faxrecv-mISDNcapid

Hallo,

würde gerne eine AVM Fritz!Card pci zum faxen mit der Kernel Capi benutzen.


Mein system läuft unter arch linux 4.9.78-1-lts


"""Capiinfo gibt aus:capi20.c: 164             
CapiDebug():[capi20_isinstalled]: standard loop - module: rcapi
            capi20.c: 164              CapiDebug():[capi20_isinstalled]:
standard loop - module: fritzbox
            capi20.c: 164              CapiDebug():[capi20_isinstalled]:
standard loop - module: misdn
            capi20.c: 164              CapiDebug():[capi20_isinstalled]:
standard loop - module: standard
            capi20.c: 164              CapiDebug():[capi20_isinstalled]:
capi_fd: -1
            capi20.c: 164              CapiDebug():[capi20_isinstalled]:
other loop - module: rcapi
            capi20.c: 164              CapiDebug():[capi20_isinstalled]:
capi_fd: -1
            capi20.c: 164              CapiDebug():[capi20_isinstalled]:
other loop - module: fritzbox
            capi20.c: 164              CapiDebug():[capi20_isinstalled]:
capi_fd: -1
            capi20.c: 164              CapiDebug():[capi20_isinstalled]:
other loop - module: misdn
            capi20.c: 164              CapiDebug():[capi20_isinstalled]:
capi_fd: 5
Number of Controllers : 1
Controller 1:
Manufacturer: mISDN
CAPI Version: 2.0
Manufacturer Version: 0.1
Serial Number: 0000001
BChannels: 2
Global Options: 0x00000001
   internal controller supported
B1 protocols support: 0x00000013
   64 kbit/s with HDLC framing
   64 kbit/s bit-transparent operation
   T.30 modem for fax group 3
B2 protocols support: 0x00000013
   ISO 7776 (X.75 SLP)
   Transparent
   T.30 for fax group 3
B3 protocols support: 0x00000031
   Transparent
   T.30 for fax group 3
   T.30 for fax group 3 with extensions

  0100
  0200
  01000000
  13000000
  13000000
  31000000
  00000000 00000000 00000000 00000000 00000000 00000000
  00000000 00000000 00000000 00000000 00000000

Supplementary services support: 0x00000000 """


misnd_info zeigt keine Fehler, misdn_log zeigt zB Anrufe.


Beim starten von c2faxrecv-mISDNcapid tritt jedoch folgender Fehler auf:

"""""[xxxx@arch ~]$ systemctl status c2faxrecv-mISDNcapid
● c2faxrecv-mISDNcapid.service - mISDN CAPI to fax receive
   Loaded: loaded (/usr/lib/systemd/system/c2faxrecv-mISDNcapid.service;
enabled; vendor preset: disabled)
   Active: failed (Result: exit-code) since Thu 2018-02-01 17:25:07 CET;
12s ago
  Process: 3038 ExecStart=/usr/bin/c2faxrecv (code=exited, status=2)
 Main PID: 3038 (code=exited, status=2)

Feb 01 17:25:07 arch c2faxrecv[3038]:             capi20.c:
164              CapiDebug():[capi20_isinstalled]: other loop - module:
misdn
Feb 01 17:25:07 arch c2faxrecv[3038]:             capi20.c:
164              CapiDebug():[capi20_isinstalled]: capi_fd: -1
Feb 01 17:25:07 arch c2faxrecv[3038]:             capi20.c:
164              CapiDebug():[capi20_isinstalled]: other loop - module:
standard
Feb 01 17:25:07 arch CapiFaxRecv[3038]: CAPI not installed, started or
have no access rights on it!
Feb 01 17:25:07 arch systemd[1]: c2faxrecv-mISDNcapid.service: Main
process exited, code=exited, status=2/INVALIDARGUMENT
Feb 01 17:25:07 arch c2faxrecv[3038]:             capi20.c:
164              CapiDebug():[capi20_isinstalled]: CapiRegNotInstalled
Feb 01 17:25:07 arch c2faxrecv[3038]: CapiFaxRecv: CAPI not installed,
started or have no access rights on it!
Feb 01 17:25:07 arch c2faxrecv[3038]: The config file is
/var/spool/hylafax/etc/config.faxCAPI.
Feb 01 17:25:07 arch CapiFaxRecv[3038]: CAPI not installed, started or
have no access rights on it!
Feb 01 17:25:07 arch systemd[1]: c2faxrecv-mISDNcapid.service: Failed
with result 'exit-code'"""""

Ich komm ohne Hilfe nicht weiter und würde mich über Lösungsvorschläge
zur Fehlersuche freuen.

Vielen Dank


Jürgen


_______________________________________________
isdn4linux mailing list
[email protected]
https://www.isdn4linux.de/mailman/listinfo/isdn4linux