PROBLEM: Linux 2.4.19 + AVM B1 = crash
Lionel Elie Mamane <[email protected]> Wed, 9 Oct 2002 16:06:03 +0200
| Newsgroups | gmane.linux.isdn |
|---|---|
| Message-ID | <[email protected]> |
[1.] One line summary of the problem:
Linux 2.4.19 + AVM B1 =3D crash
[2.] Full description of the problem/report:
Two different machines, with two different AVM B1 cards crash
when the relevant drivers are loaded and the card used (or not).
One machine, quorn, is a generic mid-tower Intel machine mainly
used as a masquerading router / print server / fax server / proxy
/ ... Light load, it is deserving a total of 2 machines, used by
only one user. When the b1 drivers are loaded, and used for
faxing with (capi4)hylafax, the machine crashed within 12 to 16
hours. Doesn't seem to be related to actual Hylafax activity. The
AVM B1 card is a PCIv4.
The other machine, linzen, is an IBM Thinkpad T21 laptop. When
the b1 drivers are loaded, and used for IP network connectivity,
the machine crashes within a few minutes. The AVM B1 card is a
PCMCIA one.
Qorn now has an uptime of one week with a 2.2 kernel, and the b1
drivers loaded and in use by (capi4)hylafax.
linzen goes well, with uptimes up to several days, as long as the
b1 drivers (and the whole isdn / capi shebang) are not loaded.
Crash is total. Machine doesn't answer to pings anymore, magic
SysRq key has no effect, and the software watchdog doesn't
initiate a reboot. Screen is blank.
[3.] Keywords (i.e., modules, networking, kernel):
isdn, capi, avmb1
[4.] Kernel version (from /proc/version):
2.4.19 (gcc version 2.95.4 20011002 (Debian prerelease))
[5.] Output of Oops.. message (if applicable) with symbolic information=
=20
resolved (see Documentation/oops-tracing.txt)
None.
[6.] A small shell script or example program which triggers the
problem (if possible)
On linzen:
pppd call isdn/ptlu
browse the web, ssh to other machines, ...
/etc/ppp/peers/isdn/ptlu contains:
sync
noauth
user XXXXXXX
plugin userpass.so
password XXXXXXXXXx
defaultroute
plugin capiplugin.so
number 90070708
protocol hdlc
ipcp-accept-local
ipcp-accept-remote
multilink
mrru 1500
# endpoint need to be changed
#endpoint magic:4711
/dev/null
usepeerdns
On quorn:
start-stop-daemon --start --exec /usr/sbin/faxq
start-stop-daemon --start --exec /usr/sbin/hfaxd -- -i 4559 -o 455=
7 -s 444
/usr/sbin/capiinit start
start-stop-daemon --start --quiet --background --make-pidfile --pi=
dfile /var/run/c2faxrecv.pid \
--exec /usr/bin/c2faxrecv
And wait...
[7.] Environment
[7.1.] Software (add the output of the ver_linux script here)
Machine "quorn":
Gnu C 2.95.4
Gnu make 3.79.1
util-linux 2.11n
mount 2.11n
modutils 2.4.15
e2fsprogs 1.27
isdn4k-utils 3.1pre4
Linux C Library 2.2.5
Dynamic linker (ldd) 2.2.5
Procps 2.0.7
Net-tools 1.60
Console-tools 0.2.3
Sh-utils 2.0.11
Modules Loaded nfs nfsd b1pci b1dma b1 capi capifs kernelcapi c=
apiutil lp lockd sunrpc ppp_deflate bsd_comp ppp slhc ip_masq_ftp parpo=
rt_pc parport nls_iso8859-1 nls_cp850
(Module information not entirely correct, because this machine has
been reverted to a 2.2 kernel because of this problem. No significant
change expected.)
Machine "linzen"
Gnu C 2.95.4
Gnu make 3.79.1
util-linux 2.11u
mount 2.11u
modutils 2.4.19
e2fsprogs 1.30-WIP
pcmcia-cs 3.2.1
isdn4k-utils 3.1pre4
Linux C Library 2.2.5
Dynamic linker (ldd) 2.2.5
Procps 2.0.7
Net-tools 1.60
Console-tools 0.2.3
Sh-utils 4.5.1
Modules Loaded smapi thinkpad xircom_cb mousedev input b1pcmcia=
b1 capi capifs kernelcapi capiutil apm snd-seq-midi snd-seq-oss snd-se=
q-midi-event snd-seq snd-pcm-oss snd-mixer-oss snd-cs46xx snd-pcm snd-t=
imer snd-rawmidi snd-seq-device gameport snd-ac97-codec snd soundcore d=
s yenta_socket pcmcia_core ide-floppy ide-tape usb-uhci sr_mod scsi_mod=
rtc
[7.2.] Processor information (from /proc/cpuinfo):
quorn:
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 3
model name : Pentium II (Klamath)
stepping : 4
cpu MHz : 267.276
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
sep_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov mmx
bogomips : 532.48
linzen:
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 8
model name : Pentium III (Coppermine)
stepping : 6
cpu MHz : 647.201
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat p=
se36 mmx fxsr sse
bogomips : 1291.05
[7.3.] Module information (from /proc/modules):
quorn:
!!!!! Running a 2.2 kernel now!!!!! This is the output with the 2.2
kernel, but no significant change is expected
nfs 66016 1 (autoclean)
nfsd 180160 0 (autoclean)
b1pci 5896 1
b1dma 10200 0 [b1pci]
b1 16064 0 [b1pci b1dma]
capi 15552 3
capifs 3424 1 [capi]
kernelcapi 28032 5 [b1pci capi]
capiutil 22272 0 [kernelcapi]
lp 5088 0 (autoclean)
lockd 43932 1 (autoclean) [nfs nfsd]
sunrpc 61212 1 (autoclean) [nfs nfsd lockd]
ppp_deflate 39104 0 (autoclean)
bsd_comp 3904 0 (autoclean)
ppp 20160 2 (autoclean) [ppp_deflate bsd_comp]
slhc 4240 0 (autoclean) [ppp]
ip_masq_ftp 3616 0
parport_pc 7328 1
parport 7296 1 [lp parport_pc]
nls_iso8859-1 2400 0 (unused)
nls_cp850 3136 0 (unused)
linzen:
smapi 2992 0 (autoclean)
thinkpad 2484 0 (autoclean) [smapi]
xircom_cb 4936 1
mousedev 3768 1 (autoclean)
input 3328 0 (autoclean) [mousedev]
b1pcmcia 3388 0
b1 16320 0 [b1pcmcia]
capi 18144 0
capifs 3424 0 [capi]
kernelcapi 29188 2 [b1pcmcia capi]
capiutil 22272 0 [kernelcapi]
apm 9408 2 (autoclean)
snd-seq-midi 3136 0 (autoclean) (unused)
snd-seq-oss 22368 0 (unused)
snd-seq-midi-event 2968 0 [snd-seq-midi snd-seq-oss]
snd-seq 36112 2 [snd-seq-midi snd-seq-oss snd-seq-midi=
-event]
snd-pcm-oss 35076 0
snd-mixer-oss 8796 0 (unused)
snd-cs46xx 69256 0
snd-pcm 48128 0 [snd-pcm-oss snd-cs46xx]
snd-timer 9960 0 [snd-seq snd-pcm]
snd-rawmidi 12288 0 [snd-seq-midi snd-cs46xx]
snd-seq-device 3728 0 [snd-seq-midi snd-seq-oss snd-seq snd-=
rawmidi]
gameport 1484 0 [snd-cs46xx]
snd-ac97-codec 22820 0 [snd-cs46xx]
snd 24876 0 [snd-seq-midi snd-seq-oss snd-seq-midi=
-event snd-seq snd-pcm-oss snd-mixer-oss snd-cs46xx snd-pcm snd-timer s=
nd-rawmidi snd-seq-device snd-ac97-codec]
soundcore 3524 7 [snd]
ds 6408 2
yenta_socket 8704 2
pcmcia_core 38656 0 [ds yenta_socket]
ide-floppy 11584 0 (autoclean)
ide-tape 48944 0 (autoclean)
usb-uhci 20972 0 (unused)
sr_mod 11824 0 (autoclean) (unused)
scsi_mod 88536 1 (autoclean) [sr_mod]
rtc 5884 1 (autoclean)
(xircom_cb not loaded at time this happened)
[7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iom=
em)
quorn: (again, with a 2.2 kernel)
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
02f8-02ff : serial(set)
0378-037f : parport0
03c0-03df : vga+
03f8-03ff : serial(set)
0778-077a : parport0
dc00-dc7f : eth0
e000-e07f : eth1
e400-e4fe : aic7xxx
linzen:
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
01f0-01f7 : ide0
02f8-02ff : serial(set)
03c0-03df : vesafb
03f6-03f6 : ide0
03f8-03ff : serial(set)
0cf8-0cff : PCI conf1
1000-103f : Intel Corp. 82371AB/EB/MB PIIX4 ACPI
1040-105f : Intel Corp. 82371AB/EB/MB PIIX4 ACPI
1800-18ff : Lucent Microelectronics WinModem 56k
1c00-1c07 : Lucent Microelectronics WinModem 56k
1c10-1c1f : Intel Corp. 82371AB/EB/MB PIIX4 IDE
1c10-1c17 : ide0
1c18-1c1f : ide1
1c20-1c3f : Intel Corp. 82371AB/EB/MB PIIX4 USB
1c20-1c3f : usb-uhci
4000-40ff : PCI CardBus #02
4000-407f : PCI device 115d:0003
4000-407f : xircom_cb
4400-44ff : PCI CardBus #02
4800-48ff : PCI CardBus #05
4c00-4cff : PCI CardBus #05
00000000-0009f7ff : System RAM
0009f800-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000e0000-000effff : Extension ROM
000f0000-000fffff : System ROM
00100000-0ffeffff : System RAM
00100000-00249c29 : Kernel code
00249c2a-002cdabf : Kernel data
0fff0000-0fffebff : ACPI Tables
0fffec00-0fffffff : ACPI Non-volatile Storage
10000000-103fffff : PCI CardBus #02
10000000-10003fff : PCI device 115d:0003
10400000-107fffff : PCI CardBus #02
10400000-104007ff : PCI device 115d:0003
10400800-10400fff : PCI device 115d:0003
10800000-10bfffff : PCI CardBus #05
10c00000-10ffffff : PCI CardBus #05
50000000-50000fff : Texas Instruments PCI1450
50100000-50100fff : Texas Instruments PCI1450 (#2)
e8000000-e80fffff : Cirrus Logic CS 4614/22/24 [CrystalClear SoundFusio=
n Audio Accelerator]
e8000000-e8002fff : CS46xx_BA1_data0
e8010000-e80137ff : CS46xx_BA1_data1
e8020000-e8026fff : CS46xx_BA1_pmem
e8030000-e80300ff : CS46xx_BA1_reg
e8100000-e8100fff : Cirrus Logic CS 4614/22/24 [CrystalClear SoundFusio=
n Audio Accelerator]
e8100000-e8100fff : CS46xx_BA0
e8101000-e81010ff : Lucent Microelectronics WinModem 56k
f0000000-f7ffffff : PCI Bus #01
f0000000-f7ffffff : S3 Inc. 86C270-294 Savage/IX-MV
f0000000-f07fffff : vesafb
f8000000-fbffffff : Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge
fff80000-ffffffff : reserved
[7.5.] PCI information ('lspci -vvv' as root)
quorn:
00:00.0 Host bridge: Intel Corp. 440LX/EX - 82443LX/EX Host bridge (rev=
03)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- St=
epping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort- <TA=
bort- <MAbort+ >SERR- <PERR-
Latency: 64
Region 0: Memory at e0000000 (32-bit, prefetchable)
Capabilities: [a0] AGP version 1.0
Status: RQ=3D31 SBA+ 64bit- FW- Rate=3Dx1,x2
Command: RQ=3D0 SBA- AGP- 64bit- FW- Rate=3D<none>
00:01.0 PCI bridge: Intel Corp. 440LX/EX - 82443LX/EX AGP bridge (rev 0=
3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- St=
epping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort- <TA=
bort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=3D00, secondary=3D01, subordinate=3D01, sec-latency=3D64
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: e8000000-ebffffff
Prefetchable memory behind bridge: ec000000-ecffffff
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
00:07.0 ISA bridge: Intel Corp. 82371AB PIIX4 ISA (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- St=
epping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort- <TA=
bort- <MAbort- >SERR- <PERR-
Latency: 0
00:07.1 IDE interface: Intel Corp. 82371AB PIIX4 IDE (rev 01) (prog-if =
80 [Master])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- St=
epping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort- <TA=
bort- <MAbort- >SERR- <PERR-
Region 4: I/O ports at f000 [disabled]
00:07.2 USB Controller: Intel Corp. 82371AB PIIX4 USB (rev 01) (prog-if=
00 [UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- St=
epping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort- <TA=
bort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at d000
00:07.3 Bridge: Intel Corp. 82371AB PIIX4 ACPI (rev 01)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- St=
epping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort- <TA=
bort- <MAbort- >SERR- <PERR-
00:09.0 Network controller: AVM Audiovisuelles MKTG & Computer System G=
mbH B1 ISDN (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- St=
epping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=3Dfast >TAbort- <TAbo=
rt- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 500ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f0003000 (32-bit, non-prefetchable)
Region 1: I/O ports at d400
Region 2: I/O ports at d800
00:0b.0 Ethernet controller: 3Com Corporation 3c905C-TX [Fast Etherlink=
] (rev 74)
Subsystem: 3Com Corporation 3C905C-TX Fast Etherlink for PC Management=
NIC
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- St=
epping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort- <TA=
bort- <MAbort- >SERR- <PERR-
Latency: 64 (2500ns min, 2500ns max), cache line size 08
Interrupt: pin A routed to IRQ 12
Region 0: I/O ports at dc00
Region 1: Memory at f0001000 (32-bit, non-prefetchable)
Expansion ROM at ed000000 [disabled]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=3D0mA PME(D0+,D1+,D2+,D3hot+,D=
3cold-)
Status: D0 PME-Enable+ DSel=3D0 DScale=3D2 PME-
00:0d.0 Ethernet controller: 3Com Corporation 3c905C-TX [Fast Etherlink=
] (rev 74)
Subsystem: 3Com Corporation 3C905C-TX Fast Etherlink for PC Management=
NIC
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- St=
epping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort- <TA=
bort- <MAbort- >SERR- <PERR-
Latency: 64 (2500ns min, 2500ns max), cache line size 08
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at e000
Region 1: Memory at f0000000 (32-bit, non-prefetchable)
Expansion ROM at ee000000 [disabled]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=3D0mA PME(D0+,D1+,D2+,D3hot+,D=
3cold-)
Status: D0 PME-Enable+ DSel=3D0 DScale=3D2 PME-
00:0f.0 SCSI storage controller: Adaptec AIC-7861 (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- St=
epping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort- <TA=
bort- <MAbort- >SERR- <PERR-
Latency: 64 (1000ns min, 1000ns max), cache line size 08
Interrupt: pin A routed to IRQ 15
Region 0: I/O ports at e400
Region 1: Memory at f0002000 (32-bit, non-prefetchable)
Expansion ROM at ef000000 [disabled]
01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA 2164W [Mil=
lennium II] AGP (prog-if 00 [VGA])
Subsystem: Matrox Graphics, Inc. MGA 2164W [Millennium II] AGP
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- St=
epping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort- <TA=
bort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin A routed to IRQ 15
Region 0: Memory at ec000000 (32-bit, prefetchable)
Region 1: Memory at e8000000 (32-bit, non-prefetchable)
Region 2: Memory at e9000000 (32-bit, non-prefetchable)
Capabilities: [f0] AGP version 1.0
Status: RQ=3D0 SBA- 64bit- FW- Rate=3D<none>
Command: RQ=3D0 SBA- AGP- 64bit- FW- Rate=3D<none>
Linzen:
00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridg=
e (rev 03)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- St=
epping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort- <TA=
bort- <MAbort+ >SERR- <PERR-
Latency: 64
Region 0: Memory at f8000000 (32-bit, prefetchable) [size=3D64M]
Capabilities: [a0] AGP version 1.0
Status: RQ=3D31 SBA+ 64bit- FW- Rate=3Dx1,x2
Command: RQ=3D0 SBA- AGP- 64bit- FW- Rate=3D<none>
00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge =
(rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr- St=
epping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort- <TA=
bort- <MAbort- >SERR- <PERR-
Latency: 128
Bus: primary=3D00, secondary=3D01, subordinate=3D01, sec-latency=3D64
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: f0000000-f7ffffff
Prefetchable memory behind bridge: fff00000-000fffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B+
00:02.0 CardBus bridge: Texas Instruments PCI1450 (rev 03)
Subsystem: IBM: Unknown device 0130
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- St=
epping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort- <TA=
bort- <MAbort- >SERR- <PERR-
Latency: 168, cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 50000000 (32-bit, non-prefetchable) [size=3D4K]
Bus: primary=3D00, secondary=3D02, subordinate=3D04, sec-latency=3D176
Memory window 0: 10000000-103ff000 (prefetchable)
Memory window 1: 10400000-107ff000
I/O window 0: 00004000-000040ff
I/O window 1: 00004400-000044ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
16-bit legacy interface ports at 0001
00:02.1 CardBus bridge: Texas Instruments PCI1450 (rev 03)
Subsystem: IBM: Unknown device 0130
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- St=
epping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort- <TA=
bort- <MAbort- >SERR- <PERR-
Latency: 168, cache line size 08
Interrupt: pin B routed to IRQ 11
Region 0: Memory at 50100000 (32-bit, non-prefetchable) [size=3D4K]
Bus: primary=3D00, secondary=3D05, subordinate=3D07, sec-latency=3D176
Memory window 0: 10800000-10bff000 (prefetchable)
Memory window 1: 10c00000-10fff000
I/O window 0: 00004800-000048ff
I/O window 1: 00004c00-00004cff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
00:03.0 Communication controller: Lucent Microelectronics WinModem 56k =
(rev 01)
Subsystem: AMBIT Microsystem Corp. Lucent Win Modem
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- St=
epping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort- <TA=
bort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e8101000 (32-bit, non-prefetchable) [size=3D256]
Region 1: I/O ports at 1c00 [size=3D8]
Region 2: I/O ports at 1800 [size=3D256]
Capabilities: [f8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=3D0mA PME(D0-,D1-,D2+,D3hot+,D=
3cold+)
Status: D0 PME-Enable- DSel=3D0 DScale=3D0 PME-
00:05.0 Multimedia audio controller: Cirrus Logic CS 4614/22/24 [Crysta=
lClear SoundFusion Audio Accelerator] (rev 01)
Subsystem: IBM: Unknown device 0153
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- St=
epping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=3Dslow >TAbort- <TAbo=
rt- <MAbort- >SERR- <PERR-
Latency: 64 (1000ns min, 6000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e8100000 (32-bit, non-prefetchable) [size=3D4K]
Region 1: Memory at e8000000 (32-bit, non-prefetchable) [size=3D1M]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=3D0mA PME(D0-,D1-,D2-,D3hot-,D=
3cold-)
Status: D0 PME-Enable- DSel=3D0 DScale=3D0 PME-
00:07.0 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- St=
epping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort- <TA=
bort- <MAbort- >SERR- <PERR-
Latency: 0
00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) (pr=
og-if 80 [Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- St=
epping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort- <TA=
bort- <MAbort- >SERR- <PERR-
Latency: 64
Region 4: I/O ports at 1c10 [size=3D16]
00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01) (p=
rog-if 00 [UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- St=
epping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort- <TA=
bort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at 1c20 [size=3D32]
00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 03)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- St=
epping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort- <TA=
bort- <MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 9
01:00.0 VGA compatible controller: S3 Inc. 86C270-294 Savage/IX-MV (rev=
11) (prog-if 00 [VGA])
Subsystem: IBM: Unknown device 017f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- St=
epping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort- <TA=
bort- <MAbort- >SERR- <PERR-
Latency: 64 (1000ns min, 63750ns max), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f0000000 (32-bit, non-prefetchable) [size=3D128M]
Expansion ROM at <unassigned> [disabled] [size=3D64K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=3D0mA PME(D0-,D1-,D2-,D3hot-,D=
3cold-)
Status: D0 PME-Enable- DSel=3D0 DScale=3D0 PME-
Capabilities: [80] AGP version 1.0
Status: RQ=3D31 SBA+ 64bit- FW- Rate=3Dx1,x2
Command: RQ=3D0 SBA- AGP- 64bit- FW- Rate=3D<none>
02:00.0 Ethernet controller: Xircom Cardbus Ethernet 10/100 (rev 03)
Subsystem: IBM 10/100 EtherJet Cardbus Adapter
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- St=
epping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort- <TA=
bort- <MAbort- >SERR- <PERR-
Latency: 64 (5000ns min, 10000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 4000 [size=3D128]
Region 1: Memory at 10400000 (32-bit, non-prefetchable) [size=3D2K]
Region 2: Memory at 10400800 (32-bit, non-prefetchable) [size=3D2K]
Expansion ROM at 10000000 [size=3D16K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=3D0mA PME(D0+,D1+,D2+,D3hot+,D=
3cold+)
Status: D0 PME-Enable- DSel=3D0 DScale=3D2 PME-
[7.6.] SCSI information (from /proc/scsi/scsi)
quorn:
Attached devices:=20
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: QUANTUM Model: FIREBALL ST6.4S Rev: 0F0C
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 02 Lun: 00
Vendor: PIONEER Model: CD-ROM DR-U03S Rev: 1.01
Type: CD-ROM ANSI SCSI revision: 02
Linzen: none
[7.7.] Other information that might be relevant to the problem
(please look in /proc and include all information that you
think to be relevant):
None.
[X.] Other notes, patches, fixes, workarounds:
I'm using the Debian version of the kernel. Here is what the
README.Debian says:
These patches were applied:
* NFS client seekdir patch
http://www.fys.uio.no/~trondmy/src/
These modifications were also made:
* Fixed a couple of argument processing bugs in main.c (Eric Delaunay).
* Added initrd support for cramfs.
* Exported proc_get_inode.
* Fixed pegasus_set_multicast lockup.
* Fixed dead lock on shutdown in 8139too.
* Allow ECN to be compiled in but disabled.
* Don't kill page cache entries in set_blocksize.
* Added support for nm256xl+ (Mattia Monga).
* Fixed handling of HIDs with product strings bug no manufacturer.
* Check old_bbpnt in drivers/scsi/sr.c (2.5).
* Removed CONFIG_FT_ALPHA_CLOCK.
* Export est_cycle_freq (needed for removing CONFIG_FT_ALPHA_CLOCK).
* Fixed the use of return values from mem*_io in drivers/isdn/sc.
* Added missing headers in drivers/pcmcia/i82092.c.
* Fixed compile error in drivers/scsi/dpt_i2o.c on alpha.
* Removed -g from driviers/atm/Makefile.
* Extern inline -> static inline in drivers/net/hamradio/soundmodem.
* Added asm/io.h for in*/out* to drivers/net/wan/farsync.c.
* Corrected AdvWriteDWordLramNoSwap in drivers/scsi/advansys.c.
* Added check for VIA KT266 IO-APIC, version =3D=3D 2.
* Translate slashes in broken Acorn ISO9660 file systems (Darren Salt).
* ip_nat_{ftp,irc} cannot be m if ip_conntrack_{ftp,irc} is y, respecti=
vely.
* Removed volume checks in fs/isofs/inode.c.
* Removed gsem from drivers/usb/pegasus.c.
* Always call complete after unlinking an urb in drivers/usb/usb-ohci.c=
=2E
* Set hardsect size to 512 in drivers/scsi/sr.c.
* Lowed invalidate messages to priority DEBUG in fs/buffer.c.
Changes to comments and documentation:
* Fixed typos in asm/socket.h.
* Fixed a typo in Documentation/sound/VIBRA16 (Carlos Valdivia Yag=FCe)=
=2E
* Fixed a typo in Documentation/sound/OPL3-SA (Carlos Valdivia Yag=FCe)=
=2E
* Fixed comment about epochs in arch/alpha/kernel/time.c.
Non-free bits removed:
* Keyspan firmware.
* SMC Token Ring firmware, driver disabled.
* ACENIC firwmare, driver disabled.
* DGRS firmware, driver disabled.
* DAB firmware, driver disabled.
Herbert Xu <[email protected]>
-
To unsubscribe from this list: send the line "unsubscribe linux-isdn" i=
n
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html