Re: VRRP3 and Multicast on different interfaces.

On Wed, 2016-12-14 at 01:21 +0100, jan hugo prins wrote:

> Hi,
> 
> I have 2 systems. One system has vlan 15 as a tagged vlan, and on the
> other system vlan15 is the base vlan, so it is untagged.
> Now we try to get vrrp working on vlan 15 between those 2 systems, and
> we need vrrp3 because the whole config is IPv6 only.
> What i see is that both systems send out the vrrp multicast packets on
> the base interface. The result is that the 2 systems don't see each other.
> 
> How do I force the system with the vlan15 on the tagged interface to use
> that interface to send the vrrp multicast packets on.
> 
> I have tryed doing the following:
> 
> ip -6 ro add ff02::12/128 dev vlan15
> 
> But that doesn't help at all.
> 
> The system with vlan15 on the tagged interface has a vlan on the base
> interface that is not available on the other server.
> 
> How do I fix this?
> 
> Jan Hugo Prins

Could you please post the keepalived configuration files from both
systems, and also the output of 'ip addr show' and 'ip -6 route show'.

Many thanks,
Quentin Armitage

------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most 
engaging tech sites, SlashDot.org! http://sdm.link/slashdot

_______________________________________________
Keepalived-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/keepalived-devel