[libata] SCSI-to-ATA translation fixes

ChangeSet 1.1543, 2005/02/02 04:10:25-05:00, [email protected]

	[libata] SCSI-to-ATA translation fixes
	
	Fixes lesser-used READ VERIFY and READ_16/WRITE_16 translations.
	
	Changes:
	#1. ata_scsi_rw_xlat():  
	Fix incorrect SCSI to ATA translation for 16 bytes SCSI Read/Write commands. 
	
	#2. Fix ata_scsi_verify_xlat():
	Fix incorrect tf->hob_lbax translation.
	
	Signed-off-by: Albert Lee <[email protected]>



 libata-scsi.c |    8 ++++----
 1 files changed, 4 insertions(+), 4 deletions(-)


diff -Nru a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c
--- a/drivers/scsi/libata-scsi.c	2005-02-07 13:03:32 -08:00
+++ b/drivers/scsi/libata-scsi.c	2005-02-07 13:03:32 -08:00
@@ -460,9 +460,9 @@
 
 	tf->nsect = n_sect & 0xff;
 
-	tf->hob_lbah = (sect >> 16) & 0xff;
-	tf->hob_lbam = (sect >> 8) & 0xff;
-	tf->hob_lbal = sect & 0xff;
+	tf->lbah = (sect >> 16) & 0xff;
+	tf->lbam = (sect >> 8) & 0xff;
+	tf->lbal = sect & 0xff;
 
 	return 0;
 }
@@ -562,7 +562,7 @@
 				return 1;
 
 			/* stores LBA27:24 in lower 4 bits of device reg */
-			tf->device |= scsicmd[2];
+			tf->device |= scsicmd[6];
 
 			qc->nsect = scsicmd[13];
 		}